SKU: SCRCL
In stock - 16 шт.
Anycubic Tough Resin Ultra Clear — Crystal-Clear, Flexible and Resilient Photopolymer Resin A...
Anycubic Tough Resin Ultra — Flexible and Impact-Resistant Photopolymer for LCD 3D Printing
Anycubic Tough Resin Ultra is an advanced-generation photopolymer resin for UV/LCD 3D printers, designed for applications requiring both flexibility and strength. It recovers quickly from deformation, is skin-friendly after curing, and can be used either directly or as an additive to improve other resins.
Key Advantages
- High Impact Resistance: Withstands mechanical stress without cracking or breaking.
- Excellent Flexibility: Elongation at break up to 80%, ideal for dynamic models.
- Non-Brittle Structure: Stays flexible even in high humidity or extreme conditions.
- Skin-Friendly After Curing: Safe for wearable parts like earphone tips, prosthetics, cosplay accessories.
- Blendable with Other Resins: Enhances toughness and elasticity when mixed.
Technical Specifications
| Parameter | Value |
|---|---|
| UV Wavelength | 365–405 nm |
| Viscosity | 500–900 cP·mPa·s |
| Density | 1.05–1.25 g/cm³ |
| Hardness | 71–75D |
| Tensile Strength | 20–28 MPa |
| Flexural Modulus | 350–800 MPa |
| Flexural Strength | 15–25 MPa |
| Elongation at Break | 70–80% |
| Heat Deflection Temperature | 50–55℃ |
| Molding Shrinkage | 5.1–6.2% |
| Cleaning | Isopropyl alcohol / ethanol |
| Shelf Life | 1.5 years |
Recommended Printing Parameters
| Printer Model | Layer Thickness | Exposure Time | Light-Off Time | Bottom Exposure Time | Bottom Layers | Anti-Aliasing Level | Z Lift Distance | Z Lift Speed | Z Retract Speed |
|---|---|---|---|---|---|---|---|---|---|
| Photon Mono M7 Max | 0.05mm | 2s | 0.5s | 30s | 5 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Mono M7 | 0.05mm | 2.2s | 1s | 25s | 4 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Mono 4 | 0.05mm | 2.8s | 1s | 30s | 5 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon Mono 4 Ultra | 0.05mm | 2.6s | 1s | 30s | 5 | 1 | 5mm | 8mm/s | 8mm/s |
| Photon Mono M7 Pro | 0.05mm | 2s | 2s | 25s | 4 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Mono M5s Pro (Normal) | 0.05mm | 3.6s | 1s | 30s | 5 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Mono M5s Pro (Fast) | 0.1mm | 3.8s | 1s | 30s | 5 | 1 | 5mm | 20mm/s | 20mm/s |
| Photon Mono M5s (Normal) | 0.05mm | 2.8s | 1s | 25s | 5 | 1 | 8mm | 5mm/s | 6mm/s |
| Photon Mono M5s (Fast) | 0.1mm | 3s | 1s | 25s | 6 | 1 | 5mm | 20mm/s | 20mm/s |
| Photon Mono M5 | 0.05mm | 2.8s | 1s | 25s | 5 | 1 | 8mm | 5mm/s | 6mm/s |
| Photon M3 Max | 0.05mm | 3s | 2s | 35s | 6 | 1 | 10mm | 2mm/s | 3mm/s |
| Photon Mono X 6Ks | 0.05mm | 2.5s | 0.5s | 20s | 5 | 1 | 8mm | 3mm/s | 4mm/s |
| Photon Mono X2 | 0.05mm | 2.5s | 1s | 20s | 5 | 1 | 8mm | 2mm/s | 3mm/s |
| Photon Mono 2 | 0.05mm | 2.5s | 1s | 25s | 5 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon D2 | 0.05mm | 2.5s | 1s | 28s | 5 | 16 | 5mm | 2mm/s | 3mm/s |
| Photon M3 Plus | 0.05mm | 1.5s | 1s | 25s | 6 | 1 | 6mm | 6mm/s | 6mm/s |
| Photon M3 | 0.05mm | 2s | 1s | 25s | 5 | 1 | 6mm | 3mm/s | 4mm/s |
| Photon M3 Premium | 0.05mm | 2.5s | 1s | 25s | 2 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Ultra | 0.05mm | 2s | 1s | 35s | 5 | 4 | 5mm | 2mm/s | 2mm/s |
| Photon Mono X | 0.05mm | 2s | 1s | 28s | 4 | 1 | 8mm | 2mm/s | 3mm/s |
| Photon Mono 4K | 0.05mm | 2s | 1s | 40s | 6 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon Mono X 6K | 0.05mm | 2s | 1s | 28s | 6 | 1 | 8mm | 2mm/s | 3mm/s |
| Photon Mono SQ | / | / | / | / | / | / | / | / | / |
| Photon Mono SE | / | / | / | / | / | / | / | / | / |
| Photon Mono | 0.05mm | 2.5s | 1s | 40s | 6 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon S | / | / | / | / | / | / | / | / | / |
Instructions for Use
- Before printing: Shake the resin thoroughly. Ensure the vat and build platform are clean and transparent.
- During printing: Pour resin into the vat. Adjust printer parameters based on the recommendations above.
- After printing: Use gloves, scraper, tweezers, and IPA (≥95%) or resin cleaner. Clean the model manually or with an ultrasonic washer.
- Post-processing:
- Remove the model from the platform with a scraper;
- Rinse or ultrasonically wash the model, then dry it;
- Use Anycubic Wash & Cure for best results;
- Remove supports, polish, and optionally paint;
- Fully cure the model under UV to reach maximum strength.
Precautions
- Store uncured resin in a cool, dark place at room temperature (18–35°C).
- Avoid direct sunlight or high temperatures. Do not heat above 60°C.
- If pigment settles, stir or shake the resin well before use.
- Do not soak printed models in liquid for too long — rinse and remove promptly.
- Always perform post-curing to ensure optimal mechanical properties.
- Post-curing recommendations:
- Use a 5–10 mW/cm² UV source (LED or mercury lamp) for no more than 1 hour;
- In summer sunlight: cure for about 1 hour outdoors;
- Avoid high-power light sources for prolonged periods;
- Use with the printer's UV cover or in a dark room to avoid premature curing.
Frequently Asked Questions (FAQ)
- Is this resin suitable for functional mechanical parts?
- Yes. Its toughness and flexibility make it ideal for dynamic and load-bearing components.
- Can I wear models made from this resin on skin?
- After curing, it's skin-safe and can be used for wearable applications like ear covers or cosplay pieces.
- Can I mix it with other resins?
- Yes. Tough Resin Ultra is perfect for blending to increase flexibility in brittle standard resins.
- What’s the best cleaning method for finished prints?
- Use ≥95% isopropyl alcohol or a resin cleaning agent. Ultrasonic cleaning is highly recommended.
- What to do if the resin thickens in the cold?
- Preheat it gently (below 60°C) to restore proper fluidity before use.