SKU: SDHLBK
In stock - 12 шт.
Anycubic DLP Craftsman Resin Black — High Precision Resin for DLP 3D Printers Product Descrip...
Anycubic DLP Craftsman Resin — high-precision resin for DLP/LCD 3D printing
Anycubic DLP Craftsman Resin is a premium photopolymer resin specifically designed for ultra-high-precision DLP and LCD printers. It delivers excellent detail, low shrinkage, and high mechanical properties. Ideal for jewelry, figurines, prototypes, micro parts, and master models.
Advantages of Craftsman Resin
- High precision and edge clarity
- Minimal shrinkage (up to 4%)
- Smooth surface of the model after printing
- Optimized for printers with DLP and LCD technology
Technical specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| UV wavelength | 365–405 nm | Elongation at break | 20–30% |
| Density | 1.05–1.25 g/cm³ | Bending strength | 50–60 MPa |
| Viscosity (25°C) | 220–250 mPa·s | Shrinking | 3.72–4.24% |
| Flexural modulus | >1400–1600 MPa | Hardness | 84 HS |
| Tensile strength | 35–55 MPa | Shelf life | 18 months |
Instructions for use
- Before use: Shake the resin; make sure the platform and tub are clean.
- When printing: Open the lid and pour the resin according to the requirements. Select the correct printing parameters.
- After printing: Use post-processing tools (spatula, tweezers, container, gloves). For cleaning - 95% alcohol, isopropanol or lactic acid.
- Post-processing:
A. Remove the model with a spatula.
B. Wash in an ultrasonic bath or by hand, let drain.
B. Remove supports, polish and paint if necessary.
Safety measures
- Store the resin in a cool, dark place, avoiding direct sunlight.
- Optimal printing temperature: 18–35°C. If the resin is cold, heat it up (no more than 60°C).
- Mix well before use if the resin has separated.
- Do not leave the model in water for a long time after washing.
- After cleaning, it is imperative to carry out UV polymerization to achieve full strength.
- During polymerization, observe the following conditions:
- Intensity: 5–10 mW/m²
- Duration - no more than 1 hour or up to 1 hour in the sun
- Do not use high-power sources or mercury lamps close to
Frequently Asked Questions (FAQ)
- Can this resin be used on an LCD printer?
Yes, Craftsman Resin is compatible with both DLP and LCD technology. - Does it have an odor?
Yes, there is a slight technical odor, so it is recommended to print in a well-ventilated area. - Can I wash it with water?
No, you need alcohol or a special liquid for cleaning. - Is additional polymerization required after printing?
Yes, UV curing is required to achieve full strength. - Is it suitable for parts with loads?
Yes, due to its hardness and flexural modulus it is suitable for technical tasks.