Description anycubic tough resin ultra white
Anycubic Tough Resin Ultra White — Strong, Flexible, and Skin-Friendly Matte Resin
Anycubic Tough Resin Ultra White is a next-generation matte photopolymer designed for 3D printing functional parts, wearable designs, and impact-resistant prototypes. With a soft-touch surface and excellent rebound, this white resin is ideal for both industrial and artistic applications that require durability and skin comfort. It also blends well with other resins to enhance flexibility and strength.
Key Advantages
- Matte White Finish: Clean, smooth look with no glare, ideal for paintable surfaces.
- Extreme Flexibility: Elongation at break up to 80% with fast shape recovery.
- Excellent Toughness: Impact-resistant, ideal for moving and load-bearing parts.
- Skin-Safe: Non-irritating and comfortable to wear after curing.
- Versatile Use: Use standalone or mix with rigid resins to boost durability.
Technical Specifications
| Parameter | Value |
|---|---|
| UV Wavelength | 365–405 nm |
| Density | 1.05–1.25 g/cm³ |
| Viscosity | 500–900 cP·mPa·s |
| Hardness | 71–75 Shore D |
| Tensile Strength | 20–28 MPa |
| Elongation at Break | 70–80% |
| Flexural Strength | 15–25 MPa |
| Flexural Modulus | 350–800 MPa |
| Molding Shrinkage | 5.1–6.2% |
| Heat Deflection Temperature | 50–55°C |
| Resin Wash | ≥95% Isopropyl Alcohol or Ethanol |
| Shelf Life | 1.5 years |
Recommended Printing Parameters
| Setting | Value |
|---|---|
| Normal Exposure Time | 1.5–3 seconds |
| Bottom Exposure Time | 20–40 seconds |
| UV Light Power | 5–10 mW/cm² |
| Post-Curing Time | 30–60 minutes |
Instructions for Use
- Before use: Shake the resin bottle well. Clean your resin tank and platform.
- During printing: Pour the resin into the tank and configure printer parameters appropriately.
- After printing: Carefully remove the model. Rinse with ≥95% IPA or ethanol. Use ultrasonic cleaning for best results.
- Post-processing: Remove supports, dry completely, then cure under UV for 30–60 minutes.
Precautions
- Store in a cool, dark place (18–35°C), away from direct light and heat.
- If thickened due to cold, preheat gently (not above 60°C).
- Shake before use if pigment settles.
- Do not leave models soaking in alcohol for extended periods.
- Always perform UV curing after washing to ensure full performance.
- Protect the resin from ambient light during printing.
Frequently Asked Questions (FAQ)
- Is the finish matte or glossy?
- The Ultra White resin cures with a smooth matte finish, perfect for painting or sanding.
- Can this be used for wearables?
- Yes. Once cured, it’s skin-safe and comfortable to wear.
- Is it compatible with my printer?
- Yes, it works with all LCD 3D printers using 365–405 nm UV light, including Anycubic Photon models.
- Can I mix it with other resins?
- Yes, it can be used to enhance the toughness and flexibility of rigid photopolymer resins.