Anycubic Wash and Cure 3 Plus Display Board
Anycubic Wash and Cure 3 Plus Display Board S020189 is an original spare part for the Anycubic Wash and Cure 3 Plus washing and curing station. The display board is used in the control panel and is responsible for information display, mode selection, time adjustment and control of the main machine functions.
A properly working display board is important for convenient operation of the post processing station. If the screen does not turn on, the controls respond poorly, incorrect information is displayed or the control panel works unstably, replacing the display board may help restore normal Wash and Cure 3 Plus operation.
Main Benefits
- Original Anycubic spare part
- Compatible with Anycubic Wash and Cure 3 Plus
- SKU S020189
- Used in the station control panel
- Helps restore display and control interface operation
- Suitable for repair and service maintenance of the post processing station
- Used for controlling washing and curing modes
- Useful when the old display board is damaged, worn or malfunctioning
Technical Specifications
| Product type | Display board for washing and curing station |
| Brand | Anycubic |
| SKU | S020189 |
| Compatible model | Anycubic Wash and Cure 3 Plus |
| Purpose | Information display and control of station functions |
| Category | Spare parts and accessories for Wash and Cure machines |
| Application | Repair of the control panel in a resin post processing station |
Compatibility
| Anycubic Wash and Cure 3 Plus |
When Replacement May Be Needed
- When the station display does not turn on.
- When the control panel does not respond to input.
- When incorrect information is shown on the screen.
- When washing or curing modes cannot be selected correctly.
- When the board has mechanical damage.
- When control becomes unstable after moisture or contamination exposure.
- When the old board interferes with normal station operation.
Installation and Maintenance Recommendations
- Disconnect the station from power before replacement.
- Do not install the board in a wet or contaminated area.
- Check the control panel connectors and cables before installation.
- Install the board carefully without excessive pressure on electronic components.
- After installation, check station startup and interface operation.
- Do not allow alcohol, water or cleaning solution to contact electronic components.
- If you do not have electronics repair experience, use professional service support.
FAQ
Which machine is this display board compatible with?
The S020189 display board is compatible with Anycubic Wash and Cure 3 Plus.
What is the Display Board used for?
The Display Board is used in the station control panel and is responsible for information display, mode setup and control of washing and curing processes.
When should the display board be replaced?
Replacement should be considered if the display does not turn on, controls do not respond, the screen shows errors or the station works unstably.
Can this board be used with Wash and Cure 3?
This product card lists Anycubic Wash and Cure 3 Plus as the compatible model. For Wash and Cure 3, it is better to select the part by exact SKU and device version.
Can I install the board myself?
If you have experience with electronics, installation can be done after disconnecting power. If not, professional service installation is recommended.