Anycubic Wash and Cure 3 Alcohol Tank Assembly
Anycubic Wash and Cure 3 Alcohol Tank Assembly S020176 is an original assembly for the Anycubic Wash and Cure 3 washing and curing station. The part is used for cleaning resin printed models after 3D printing and helps organize the washing process with alcohol or another compatible cleaning solution.
The Alcohol Tank Assembly may include the alcohol tank, tank rotor, washing basket and stand. This assembly is useful for replacing a damaged or worn washing unit and can also be used as an additional working tank for regular post processing of photopolymer resin models.
Main Benefits
- Original Anycubic spare part
- Compatible with Anycubic Wash and Cure 3
- SKU S020176
- Used for washing models after resin 3D printing
- Suitable for alcohol or compatible cleaning solution
- Helps restore proper washing unit operation
- Convenient as an additional tank for different cleaning liquids
- Suitable for regular post processing station maintenance
Technical Specifications
| Product type | Alcohol tank assembly |
| Brand | Anycubic |
| SKU | S020176 |
| Compatible model | Anycubic Wash and Cure 3 |
| Possible assembly contents | Alcohol tank, tank rotor, washing basket, stand |
| Purpose | Washing resin printed models after 3D printing |
| Category | Spare parts and accessories for Wash and Cure machines |
| Application | Post processing after photopolymer resin printing |
Compatibility
| Anycubic Wash and Cure 3 |
When Replacement May Be Needed
- When the tank has cracks, deformation or mechanical damage.
- When liquid starts leaking through the body or connections.
- When the tank rotor no longer operates properly.
- When the basket or stand is damaged after long term use.
- When the old tank is contaminated with resin residue and is difficult to clean.
- When an additional reservoir is needed for different cleaning liquids.
Usage Recommendations
- Disconnect the station from power before installation.
- Make sure the tank is installed evenly and securely.
- Do not exceed the allowed cleaning liquid level.
- After washing models, close the container if alcohol remains inside.
- Filter contaminated alcohol regularly to remove resin particles.
- Do not leave cured resin residue on the tank bottom or in the basket.
- After use, store the tank in a clean place protected from dust and direct light.
FAQ
Which machine is this alcohol tank assembly compatible with?
The S020176 alcohol tank assembly is compatible with Anycubic Wash and Cure 3.
What is the Alcohol Tank Assembly used for?
It is used for washing models after photopolymer resin printing and helps remove uncured resin from printed part surfaces.
What may be included in the assembly?
The assembly may include the alcohol tank, tank rotor, washing basket and stand.
Can this tank be used with Wash and Cure 3 Plus?
No, Wash and Cure 3 Plus uses a different assembly. This SKU is intended for Anycubic Wash and Cure 3.
When should the tank be replaced?
The tank should be replaced if it is cracked, leaking, heavily contaminated, or if the rotor, basket or stand is damaged.