Metal Rose PETG Filament ALL3DP RAL 4008 1 kg

Description

Metal Rose PETG Filament ALL3DP RAL 4008 1 kg is a decorative and technical PETG filament for FDM/FFF 3D printing with a metallic visual effect and a rich rose-violet shade. In the ALL3DP line, the color is presented as Metal Rose, while the RAL 4008 standard corresponds to Signal Violet.

The material combines PETG strength and practicality with an attractive metallic surface. This filament is suitable for decorative models, housings, souvenirs, mockups, designer elements, signs, panels, covers, prototypes and functional parts where an unusual rose-violet metallic appearance is required.

Main Advantages

• Commercial shade name: Metal Rose.
• RAL 4008 Signal Violet color standard.
• RAL 4008 HEX code: #904684.
• Metallic visual effect for decorative and presentation models.
• Practical PETG properties: toughness, durability, moisture resistance and good layer adhesion.
• Better heat resistance compared with standard PLA.
• 1.75 mm diameter compatible with most FDM/FFF 3D printers.

Technical Specifications

Parameter	Value
Brand	ALL3DP
SKU	211
Material	PETG Metal Color
Commercial color name	Metal Rose
RAL	RAL 4008
RAL color name	Signal Violet
HEX	#904684
Net weight	1 kg
Filament diameter	1.75 mm
Filament length	approximately 330 m
Printing technology	FDM/FFF
Surface finish	Metallic visual effect, semi-gloss surface

⚙️ Recommended Printing Parameters

Parameter	Recommendation
Nozzle temperature	220–250°C
Bed temperature	70–90°C
Print speed	30–50 mm/s for better surface quality
Cooling fan	low to moderate
Retraction	1–2 mm as a starting point, then tune for your extruder type
Build surface	PEI, glass, textured plate or PETG-compatible adhesive
Slicer profile	PETG / CoPET with temperature, flow and retraction tuning
Enclosure	Not required, but drafts should be avoided

Physical and Visual Properties

• Metal Rose is the commercial shade name in the PETG Metal Color line.
• RAL 4008 belongs to the violet hues group and is called Signal Violet.
• The color can be described as rose-violet, rose metallic, purple-rose or rich decorative metallic.
• The metallic effect looks best on models with smooth surfaces, bevels, rounded geometry and decorative shapes.
• For a cleaner surface finish, print outer walls at a stable speed and calibrate the flow rate accurately.

Best Applications

• Decorative models with a rose metallic effect.
• Housings for electronics, devices and small equipment.
• Souvenirs, logos, signs and branded elements.
• Mockups, architectural models and presentation prototypes.
• Interior design elements.
• Panels, covers, trims, holders and functional parts.
• Models requiring an unusual rose-violet premium shade with a metallic effect.

3D Printer Compatibility

Metal Rose PETG Filament ALL3DP is compatible with most FDM/FFF 3D printers using 1.75 mm filament and supporting PETG printing temperatures. It can be used with Creality Ender, Creality K1, Anycubic Kobra, Prusa, Bambu Lab, Elegoo Neptune, Artillery, FlyingBear, FlashForge and other FDM/FFF machines.

Printing Recommendations

• Make sure the filament is dry before printing: wet PETG may cause stringing, bubbles, popping sounds and uneven surface quality.
• For a cleaner metallic effect, reduce the outer wall speed.
• Avoid excessive cooling, as it may reduce PETG interlayer adhesion.
• Calibrate temperature, flow and retraction on a test model before printing large parts.
• For good first layer adhesion, use a clean build plate and correct nozzle-to-bed distance.
• If stringing appears, slightly lower the nozzle temperature and tune retraction.
• During long prints, check nozzle cleanliness regularly.

Storage Recommendations

• Store the spool in a sealed bag or container with silica gel.
• Do not leave PETG exposed to open air for a long time, especially in humid rooms.
• If bubbles, popping sounds, stringing or rough surfaces appear, dry the filament before use.
• After printing, return the spool to dry storage.

FAQ

 

What is the correct color name?

For a product card, the best name is “Metal Rose PETG” or “Rose Metallic PETG”. The technical color standard should be listed as RAL 4008 Signal Violet.

Why is RAL 4008 called Signal Violet if the product is called Rose?

RAL 4008 is the base color standard Signal Violet. Rose is the commercial filament shade name describing the rose-violet metallic visual effect.

Is this standard PETG or PETG with a metallic effect?

This is PETG Metal Color with a decorative metallic visual effect. Printed parts look more expressive than models printed with standard solid-color PETG.

Can I print it on a regular FDM printer?

Yes. The filament is suitable for FDM/FFF 3D printers using 1.75 mm filament if the printer supports PETG printing temperatures.

Is an enclosure required?

An enclosure is usually not required for PETG. Stable room temperature, good first layer adhesion and protection from drafts are usually enough.