Resin Vat for Anycubic Photon Mono 4 3D Printer
Anycubic Photon Mono 4 Resin Vat S020277 is an additional tank for photopolymer resin designed for the Anycubic Mono 4 3D printer. The resin vat holds liquid resin during printing and is one of the key consumable and service parts of a resin 3D printer.
An additional resin vat is especially useful when printing regularly with different resin types. It allows faster material changes without pouring resin back and forth every time. This saves time, reduces the risk of workspace contamination and makes the resin printing workflow cleaner and more convenient.
Main Benefits
- Original Anycubic resin vat
- Compatible with Anycubic Photon Mono 4
- SKU S020277
- Designed for photopolymer resin
- Convenient for quick resin type changes
- Useful for keeping separate vats for different resin colors or materials
- Includes a corner cutout for easier resin pouring
- Includes a maximum fill level mark
- Suitable for repair, maintenance and workflow expansion
Technical Specifications
| Product type | Resin vat for photopolymer resin |
| Brand | Anycubic |
| SKU | S020277 |
| Compatible model | Anycubic Photon Mono 4 |
| Purpose | Holding photopolymer resin during 3D printing |
| Category | Spare parts and accessories for resin 3D printers |
| Application | Resin printing, printer maintenance and quick material changes |
Compatibility
| Anycubic Photon Mono 4 |
Why an Additional Resin Vat Is Useful
An additional resin vat is useful if you often work with different photopolymer resin types. For example, one vat can be used for standard gray resin, another for clear resin and another for ABS Like, Tough, High Speed or other specialty resin. This reduces pouring, helps avoid material mixing and speeds up printer preparation.
When Replacement May Be Needed
- When the resin vat body is damaged.
- When the bottom film has scratches, dents or visible wear.
- When resin starts leaking through the film or frame.
- When cured resin particles remain inside the vat after printing.
- When the old vat is contaminated with material that is difficult to remove completely.
- When faster resin switching is needed between different printing tasks.
Usage Recommendations
- Before printing, check the vat for scratches, dents and foreign particles.
- Carefully inspect the bottom film before each print.
- Do not exceed the maximum resin fill level mark.
- After printing, pour remaining resin out through the corner cutout.
- Filter resin before returning it to the bottle if polymer particles may be present.
- Clean the resin vat after each use.
- Do not use sharp metal tools to clean the vat bottom.
- Store the vat in a clean place protected from dust and direct UV light.
FAQ
Which printer is this resin vat compatible with?
The S020277 resin vat is compatible with the Anycubic Photon Mono 4 resin 3D printer.
What is a resin vat used for?
A resin vat is used as a tank for liquid photopolymer resin during resin 3D printing.
Why is an additional resin vat useful?
An additional vat allows faster resin changes, helps keep different materials separate and reduces the need to pour resin between prints.
Should the resin vat be cleaned after printing?
Yes, the resin vat should be cleaned after each use to extend service life and reduce the risk of print defects.
What should be checked before printing?
Before printing, check for scratches, dents, cured resin particles and damage on the vat bottom.