Orange Red Metallic PETG Filament ALL3DP 1 kg
SKU: 220
Orange Red Metallic PETG Filament ALL3DP is a decorative and technical material for FDM/FFF 3D printing with a metallic visual effect. The shade RAL 3009 and HEX #703731 looks like a deep dark orange-red metallic color with an oxide red, copper-rust and industrial character.
🟠 Color: Orange Red Metallic RAL 3009
RAL 3009 / #703731 is not a bright orange color. It is a more complex dark orange-red shade that may appear as oxide red, rusty red, copper-brown or industrial metallic depending on lighting, model geometry and print settings.
- 🟠 Dark orange-red metallic shade
- 🎯 Color standard: RAL 3009
- 🎨 HEX code: #703731
- ✨ Metallic visual effect
- 🧩 Good choice for housings, mockups, souvenirs and designer parts
✅ Metallic PETG Advantages
- 💪 Good strength and impact resistance
- 🌡️ Better heat resistance than standard PLA
- 💧 Good moisture resistance of finished parts
- 🧵 Stable 1.75 mm filament feeding
- ✨ Decorative metallic appearance
- ⚙️ Suitable for functional and visually expressive parts
📋 Technical Specifications
| Material | Metallic PETG |
|---|---|
| Color | Orange Red Metallic / dark oxide red |
| Color standard | RAL 3009 |
| HEX | #703731 |
| SKU | 220 |
| Net weight | 1 kg |
| Filament diameter | 1.75 mm |
| Color type | Metallic |
| Surface finish | Semi-gloss / metallic visual effect |
| Compatibility | FDM/FFF 3D printers using 1.75 mm filament |
⚙️ Recommended Printing Parameters
| Nozzle temperature | 230 - 250 ℃ |
|---|---|
| Bed temperature | 70 - 90 ℃ |
| Print speed | 40 - 80 mm/s |
| Cooling fan | 20 - 50% |
| Retraction | Adjust according to extruder type to reduce stringing |
| Build surface | PEI, glass, textured plate or adhesive-assisted surface |
🧰 Best Applications
- 🎨 Decorative models with a metallic effect
- 🏭 Industrial mockups, housings and technical elements
- 🧩 Designer parts, souvenirs and accessories
- 🚗 Automotive accessories, panels, covers and functional prototypes
- ⚙️ Parts where PETG durability and expressive appearance are both needed
💡 Printing Tips
- 🔧 Use dry filament for stable feeding and cleaner surfaces.
- 💨 Avoid maximum cooling — PETG usually prints better with moderate fan speed.
- 🧼 Clean the build plate before printing to improve adhesion.
- 📦 Store the spool in a sealed bag with silica gel after printing.
- ✨ For a smoother metallic effect, use stable temperature, accurate flow calibration and clean outer walls.
❓ FAQ
No. RAL 3009 and HEX #703731 look like a dark orange-red metallic shade. It is closer to oxide red, rusty red, copper-brown or industrial tones. Yes, PETG is suitable for housings, mounts, covers, holders and prototypes. The metallic color makes the model more decorative, while the material remains practical for FDM/FFF printing. Usually Metallic PETG can be printed with a standard nozzle if it does not contain abrasive filler. For stable results, keep the nozzle clean and tune the printing temperature correctly. PETG can be prone to stringing. To reduce it, dry the filament, tune retraction, adjust nozzle temperature and optimize travel speed.Is this a bright orange color?
Is Metallic PETG suitable for functional parts?
Does Metallic PETG require a special nozzle?
Why can PETG create strings?