SKU: HPLPBK-101
In stock - 19 шт.
Anycubic PLA+ Black Filament 1 kg 1.75 mm ⚫ Anycubic PLA+ Black Filament for strong, clean and pr...
Anycubic PLA+ Filament for 3D Printing
Anycubic PLA+ Filament is an upgraded material designed for enhanced strength, excellent print quality, and eco-friendly performance. It is ideal for producing precise models, functional prototypes, and artistic creations.
Key Advantages of Anycubic PLA+
- High impact resistance. Provides excellent toughness and resists breakage under external pressure.
- Consistent print quality. High dimensional accuracy and low shrinkage help prevent warping and cracking.
- Higher flexural modulus. Reaches 4175 MPa, almost double that of standard PLA, offering superior stiffness and shape retention.
- Eco-friendly material. PLA is made from lactic acid derived from corn or other plant starch fermentation. It is biodegradable and environmentally safe.
- Smooth layer finish. Enables precise, detailed printing with minimal visible layer lines.
- Broad printer compatibility. Works with all FDM 3D printers that support 1.75 mm filament, including Anycubic, Creality, Prusa, Elegoo, Bambu Lab, and others.
Technical Specifications
| Parameter | Value |
|---|---|
| Product Type | PLA+ |
| Filament Diameter | 1.75 mm |
| Diameter Tolerance | ±0.02 mm |
| Net Weight | 1 kg |
| Density | 1.23 g/cm³ |
| Tensile Strength | 58 MPa |
| Elongation at Break | 3.8% |
| Flexural Strength | 73 MPa |
| Flexural Modulus | 4175 MPa |
| Young's Modulus | 3570 MPa |
| Izod Impact Strength | 41 KJ/m² |
| Melting Point | 164°C |
| Melt Index | 4–10 g/10 min |
| Heat Distortion Temperature | 53°C |
Recommended Printing Parameters
| Setting | Typical Value |
|---|---|
| Nozzle Temperature | 190–230°C |
| Build Plate Temperature | 50–60°C |
| Build Surface | Soft magnetic sticker |
| Surface Treatment | No treatment required |
| Cooling Fan | 100% |
| Print Speed | 50–100 mm/s |
| Raft Z Distance | 0.4–0.6 mm |
| Retraction Distance | 5 mm |
| Retraction Speed | 50 mm/s |
| Print Environment Temperature | Room temperature |
| Recommended Support Material | PVA |
| Drying Temperature | 50°C |
How to Install Filament
- Mount the filament spool on the 3D printer’s spool holder.
- Preheat the nozzle to the target temperature (recommended above 230°C).
- Cut the filament end into a sharp tip.
- Insert the filament into the extruder and feeding tube.
- Manually push the filament through until it extrudes from the nozzle.
Important Notes
- Always heat the print head above 230°C before installing or replacing filament to avoid nozzle clogging.
- Store the filament in a dry environment, ideally in a sealed bag or container with desiccant.
Printer Compatibility
Compatible with all FDM 3D printers using 1.75 mm filament, including models from Anycubic, Creality, Prusa, Elegoo, Bambu Lab, and others.
Available Colors
- PLA+ Black
- PLA+ White
- PLA+ Gray