PioNext Ortho Model Resin 2.0 Beige 0.5 kg
PioNext Ortho Model Resin 2.0 Beige 0.5 kg is a professional light-curing dental model resin for orthodontic models, thermoforming working models, aligner-related models, retainer workflow models and diagnostic dental arches. The material is designed for laboratory applications where accurate geometry, high hardness, dimensional stability, fine dental detail reproduction and clean surface quality after post-processing are important.
The Beige / Yellowish Brown dental shade is convenient for visual inspection: tooth contours, contact areas, margins, anatomical relief and gingival line details remain easy to read on the printed model. This shade works well for dental laboratories, orthodontic clinics and digital production workflows where the model must be accurate and easy to inspect.
The resin fits a digital dental workflow: intraoral or laboratory scanning, CAD design, file preparation, 3D printing on an LCD / MSLA / DLP printer, washing, drying, UV post-curing and further use of the model in laboratory procedures.
Important: this is a dental model resin. Do not use it for temporary crowns, surgical guides, splints, trays or direct intraoral devices unless such use is specifically confirmed by official documentation, your laboratory protocol and applicable local regulations.
Main Advantages
- For orthodontic models — suitable for aligner models, retainer workflow models and thermoforming applications.
- High printing accuracy — helps reproduce tooth shape, margins, contact zones and anatomical details.
- High Shore D hardness — the finished model keeps its shape during laboratory handling.
- Temperature resistance — important for working models used in thermoforming workflows.
- Low shrinkage — helps reduce dimensional deviation after printing and UV post-curing.
- LCD / MSLA / DLP compatibility — designed for resin 3D printers using the 385-405 nm wavelength range.
- Dental beige shade — convenient for visual quality control of surface and detail reproduction.
- 0.5 kg bottle — practical for laboratories, test batches, small-series production and introducing a new material into the workflow.
Technical Specifications
| Product name | PioNext Ortho Model Resin 2.0 Beige 0.5 kg |
| Material type | Light-curing dental model resin |
| Application | Orthodontic models, thermoforming working models, aligner models, diagnostic dental models |
| Color | Beige / Yellowish Brown dental shade |
| Net weight | 0.5 kg / 500 g |
| Compatible technology | LCD / MSLA / DLP resin 3D printing |
| UV wavelength range | 385-405 nm |
| Viscosity | 350 cps @ 25 ℃ |
| Density | 1.05-1.1 g/cm³ @ 25 ℃ |
| Post-cure hardness | Shore D 85-90 |
| Flexural modulus | 1200-1600 MPa |
| Flexural strength | 80-95 MPa |
| Tensile modulus | 600-1000 MPa |
| Tensile strength | 40-50 MPa |
| Elongation at break | 10-15% |
| Notched Izod impact strength | 35-45 J/m |
| Heat deflection temperature | 75-85 ℃ |
Recommended Applications
- Orthodontic model printing.
- Thermoforming working models.
- Models for aligner production workflows.
- Models for retainer-related laboratory workflows.
- Diagnostic dental arch models.
- Demonstration dental models.
- Laboratory models for checking shape, fit and geometry.
Compatibility with Resin 3D Printers
PioNext Ortho Model Resin 2.0 is compatible with LCD, MSLA and DLP 3D printers using 385-405 nm light-curing resin workflows. Before production printing, exposure must be calibrated for the exact printer, layer height, resin temperature, release film condition, LCD screen age and UV module power.
- Anycubic Photon series: Photon Mono, Mono 2, Mono 4, Mono 4K, Mono 4 Ultra, Mono M5, M5s, M5s Pro, Mono M7, M7 Pro, M7 Max, Mono X, Mono X2, Mono X 6K, Mono X 6Ks, Photon M3, M3 Plus, M3 Premium, M3 Max, Photon D2, Photon Ultra.
- Elegoo: Mars, Saturn and Jupiter series after exposure calibration.
- Phrozen: Sonic Mini, Sonic Mighty and Sonic Mega series after calibration.
- Creality HALOT: HALOT ONE, HALOT SKY, HALOT LITE, HALOT MAGE, HALOT MAGE PRO, HALOT R6 series.
- Uniformation: GKtwo, GK3 and other LCD/MSLA printers.
- PioNext / PioCreat dental printers: dental LCD/DLP systems supporting 385-405 nm resin workflows.
Not suitable for FDM / FFF 3D printers because this is a liquid photopolymer resin, not a plastic filament.
Recommended Printing Parameters
Exact printing parameters depend on the printer model, UV module power, layer height, resin temperature, model surface area, part orientation and release film condition. For the first setup, use a dental model resin profile and always run an exposure calibration test.
| Parameter | Recommendation |
| Layer thickness | 0.05 mm for accurate dental models; 0.1 mm for faster printing after quality validation |
| Normal exposure | Adjust by exposure test for the specific LCD / MSLA / DLP printer |
| Bottom exposure | Adjust according to build plate adhesion, model size and contact area |
| Washing | IPA or another compatible cleaner for photopolymer resins |
| Post-curing | Required after washing and complete drying of the model |
Recommended Starting Print Settings for Anycubic Photon
The table below provides starting points for printing PioNext Ortho Model Resin 2.0 Beige on Anycubic Photon printers. These values are not final factory profiles. They are baseline settings for initial setup only. Before production printing, always perform an exposure test for the exact printer, layer height, temperature, release film and UV module power.
| Anycubic Model | Layer Thickness | Exposure Time | Light-Off Time | Bottom Exposure Time | Bottom Layer | Z Lift Distance | Z Lift Speed | Z Retract Speed | Anti-Aliasing Level |
| Photon Mono M7 Max / M7 Pro / M7 | 0.05 mm | 2.5 - 3.2 s | 1 s | 28 - 35 s | 5 | 8 mm | 4 - 6 mm/s | 4 - 6 mm/s | 1 |
| Photon Mono 4 Ultra / Photon Mono 4 | 0.05 mm | 2.8 - 3.6 s | 1 s | 30 - 35 s | 5 | 5 - 6 mm | 4 - 6 mm/s | 6 mm/s | 1 |
| Photon Mono M5s Pro / M5s / M5 | 0.05 mm | 3.0 - 3.8 s | 1 s | 28 - 35 s | 5 - 6 | 8 mm | 4 - 5 mm/s | 5 - 6 mm/s | 1 |
| Photon Mono X 6Ks / Mono X2 / Mono 2 | 0.05 mm | 2.8 - 3.5 s | 1 s | 25 - 35 s | 5 - 6 | 6 - 8 mm | 2 - 4 mm/s | 3 - 6 mm/s | 1 |
| Photon Mono 4K / Photon Mono X / older Mono models | 0.05 mm | 3.0 - 4.5 s | 1 s | 35 - 45 s | 6 | 6 - 8 mm | 2 - 4 mm/s | 3 - 6 mm/s | 1 |
| Photon S / older RGB LCD printers | 0.05 mm | 8 - 12 s | 1 - 2 s | 50 - 70 s | 6 - 8 | 6 mm | 1 - 2 mm/s | 2 - 3 mm/s | 1 |
Recommendation: if the model is soft, tacky or lacks sharp detail, increase normal exposure in small steps. If fine details are overcured, edges become rough or fit accuracy decreases, reduce exposure and repeat the test.
Post-Processing
- Shake the bottle well before printing to evenly distribute pigments and resin components.
- Check the resin vat, release film and build platform surface.
- Set up the print profile and run an exposure test.
- After printing, carefully remove the model from the build platform.
- Wash the model in IPA or another compatible cleaner.
- Dry the model completely before final UV polymerization.
- Post-cure the model in a UV curing chamber.
- Check accuracy, margins, surface quality and model geometry before laboratory use.
Safety and Storage
- Use nitrile gloves and avoid skin contact with uncured resin.
- Use eye protection when pouring resin, printing and cleaning parts.
- Work in a well-ventilated area.
- Do not leave resin under direct sunlight.
- Keep the bottle tightly closed and away from children, animals, heat and UV light.
- Dispose of uncured resin residues, wipes and contaminated materials according to local rules after full UV curing.
Why Buy PioNext Ortho Model Resin 2.0 Beige
PioNext Ortho Model Resin 2.0 Beige 0.5 kg is a practical choice for laboratories and specialists who need a stable dental model resin for orthodontic model printing. The material combines high hardness, temperature resistance, good detail reproduction and a convenient beige shade for visual inspection. The 0.5 kg format is suitable for testing, small batches and routine model printing without purchasing a larger volume immediately.
FAQ
It is used for printing orthodontic models, thermoforming working models, aligner-related models, retainer workflow models and diagnostic dental models. The color is Beige / Yellowish Brown. In the product card, it is described as a dental beige shade. Yes. It can be used with Anycubic Photon and other 385-405 nm LCD/MSLA printers, but the print profile must be calibrated for the exact printer model. No. This is a liquid photopolymer resin for LCD / MSLA / DLP printers. FDM printers use PLA, PETG, ABS, ASA, TPU and other filaments. Yes. After washing and complete drying, the model must be additionally cured in a UV curing chamber. No. These are starting parameters only. Before production printing, always run an exposure calibration test.What is PioNext Ortho Model Resin 2.0 used for?
What color is this resin?
Is this resin compatible with Anycubic Photon?
Can this resin be used on an FDM printer?
Is post-curing required after printing?
Can the Anycubic starting settings be used without testing?