Motherboard for 3D Printer Anycubic Photon Mono X2
Description
Motherboard for 3D printer Anycubic Photon Mono X2 is a replacement electronic control board for the Anycubic Photon Mono X2 resin 3D printer. The board coordinates the main printer systems, including the screen, UV light source, Z axis, touch panel, fans, power system and other electronic components.
This part is used for printer repair when the original motherboard is faulty, the printer does not start correctly, control errors appear, the screen works unstable, UV exposure fails or communication between electronic modules is interrupted. Replacing the motherboard helps restore correct operation of the Anycubic Photon Mono X2 without purchasing a new printer.
Advantages
- Compatible with Anycubic Photon Mono X2
- Used for repair and restoration of printer electronics
- Helps solve printer control problems
- Suitable for service maintenance of a resin 3D printer
- Important spare part for stable screen, UV light and Z axis operation
- Helps extend the service life of the equipment
Technical Specifications
| Product name | Motherboard for 3D Printer Anycubic Photon Mono X2 |
| Full product name | Motherboard for 3D printer Anycubic Photon Mono X2 |
| SKU | S020115 |
| Part type | Motherboard, Mainboard, Control Board |
| Compatibility | Anycubic Photon Mono X2 |
| Printer type | LCD resin 3D printer |
| Purpose | Control of printer electronic systems |
| Package outer dimensions | 210 x 160 x 70 mm |
| Category | Spare parts and accessories for Anycubic 3D printers |
When to Replace the Motherboard
- The printer does not turn on or starts unstable
- The touch screen does not respond to commands
- Control errors appear during printing
- The Z axis works incorrectly
- The UV light does not turn on or works unstable
- The printer does not read files or processes commands incorrectly
- Diagnostics confirm a mainboard fault
Compatibility
This motherboard is intended for Anycubic Photon Mono X2. Before ordering, check the printer model and part number. Anycubic Photon Mono X, Photon Mono X 6K, Photon Mono X 6Ks, Photon Mono 2, Photon Mono 4K and other models may use different boards.
Installation Recommendations
- Disconnect the printer from power before replacement
- Do not replace the board while the power cable is connected
- Take a photo of all cable connections before removing the old board
- Check compatibility with Anycubic Photon Mono X2
- Avoid static electricity when working with electronics
- Installation should be performed by a qualified 3D printer repair specialist
- After installation, check the screen, Z axis, UV light and control functions
Suitable Applications
- Repair of Anycubic Photon Mono X2
- Replacement of a faulty mainboard
- Restoration of electronic component operation
- Service maintenance of a resin 3D printer
- Diagnostic repair after power or control failures
FAQ
Is this motherboard compatible with Anycubic Photon Mono X2
Yes, this motherboard is intended for the Anycubic Photon Mono X2 3D printer.
What is the SKU of the Anycubic Photon Mono X2 motherboard
The SKU of this part is S020115.
Can I install the motherboard myself
If you have experience with electronics and 3D printer repair, installation can be done by yourself. If not, it is better to contact a qualified technician.
Is this board compatible with Anycubic Photon Mono X or Photon Mono X 6K
No, this board is listed for Anycubic Photon Mono X2. Compatibility with other models and part numbers should be checked separately.
When should the motherboard be replaced
Replacement is needed when the mainboard is faulty, the printer has startup issues, control errors, unstable screen operation, Z axis problems or UV light failures.