PioNext Flexible Resin White 0.5KG

PioNext Flexible Resin White 0.5KG is designed for LCD and DLP 3D printers and is suitable for printing flexible, soft and elastic parts with high accuracy. The material combines good fluidity, high elasticity, notable elongation at break, a smooth surface and good wear resistance. This resin is suitable for prototypes, functional parts, straps, soft inserts, cushioning elements, teaching models and other objects where flexibility of the finished part is important.

Key Advantages

• Flexible and elastic structure of finished parts
• Smooth surface after printing
• Good wear resistance
• Low viscosity and good fluidity
• Suitable for high precision printing
• Short layer curing time
• Compatible with LCD and DLP equipment
• Suitable for soft and functional parts

Material Description

PioNext Flexible Resin White 0.5KG is developed for applications where standard rigid resin is not suitable. This material makes it possible to produce parts with noticeable flexibility and softness, which is especially important for products that need to bend, absorb load or stay comfortable in contact applications and accessories. The resin can be used for soft product prototypes, straps, pads, cushioning inserts, demonstration models, decorative elements and other parts where a combination of shape retention, accuracy and elasticity is required.

Technical Specifications

Material Type	Flexible photopolymer resin
Color	White
Pack Size	0.5KG
Compatibility	LCD and DLP 3D printers
Viscosity at 25 C	200 - 400 cps
Density at 25 C	1.10 - 1.20 g/cm3
Hardness	Shore A 35 - 55
Tensile Strength	5 - 10 MPa
Elongation at Break	300 - 500 %
Shelf Life	Up to 18 months when stored below 25 C away from light

Recommended Applications

• Soft functional prototypes
• Straps and flexible accessories
• Cushioning and damping elements
• Soft inserts and pads
• Teaching and demonstration models
• Decorative and design objects
• Parts requiring elasticity and soft touch characteristics

Recommended Printing Parameters

Equipment	Layer Thickness	Base Layer Exposure	Normal Layer Exposure	Lift Speed
DJ 89	0.05 - 0.1 mm	30 - 50 s	3.5 - 4.5 s	1 - 8 mm/s
DJ 89 Plus	0.05 - 0.1 mm	30 - 50 s	3.5 - 4.5 s	1 - 10 mm/s
Halot One	0.05 - 0.1 mm	20 - 40 s	4.5 - 6.5 s	1 - 3 mm/s
Halot Sky	0.05 - 0.1 mm	30 - 50 s	3.5 - 4.5 s	1 - 8 mm/s
Halot Mage	0.05 - 0.1 mm	30 - 50 s	2.5 - 4.0 s	1 - 3 mm/s
Photon Mono M5s	0.05 - 0.1 mm	30 - 50 s	3.5 - 4.5 s	1 - 10 mm/s
Saturn 3 Ultra	0.05 - 0.1 mm	30 - 50 s	3.5 - 4.5 s	1 - 10 mm/s

Post Processing

After printing, the model should be cleaned with absolute ethanol or isopropanol. A gentle cleaning process and low frequency ultrasonic cleaning are recommended. After washing, the model should be dried thoroughly with airflow. It is recommended to remove most supports before final post curing. For additional curing, a UV lamp can be used for about 5 minutes, depending on the size and geometry of the part.

Storage Recommendations

Store the resin in a tightly closed container in a dry and cool place below 25 C. The material is sensitive to light, so it should be protected from direct sunlight and strong visible light.

FAQ

What printers is PioNext Flexible Resin White 0.5KG compatible with?

This resin is compatible with LCD and DLP 3D printers that work with photopolymer materials.

What is flexible resin best used for?

This material is well suited for soft prototypes, straps, pads, cushioning parts, teaching models and other prints where elasticity is required.

Can it produce a smooth surface after printing?

Yes, the manufacturer lists smooth surface as one of the key benefits of Flexible Resin.

How should printed models be cleaned?

Absolute ethanol or isopropanol is recommended for cleaning.

Is this resin suitable for rigid engineering parts?

This is not the main use case. The material is designed primarily for flexible and soft parts rather than maximum rigidity.

Is White one of the available Flexible Resin colors?

Yes, White is shown among the available color options for the material.