Description anycubic abs-like resin 3.0 clear
Anycubic ABS Like Resin 3.0 Clear 1 kg
Anycubic ABS Like Resin 3.0 Clear is a transparent photopolymer resin designed for LCD and DLP 3D printers operating at 365 to 405 nm. It offers high strength, excellent dimensional accuracy, minimal shrinkage, and clear or semi clear visual appearance suitable for both functional and decorative prints.
Key Advantages
- High transparency for optical and aesthetic applications
- Improved toughness and mechanical strength
- Low shrinkage and stable geometry
- Low viscosity for faster flow and efficient printing
- Suitable for engineering models and design prototypes
- Compatible with all 365 to 405 nm resin printers
Typical Applications
- Transparent housings and casings
- Light guides and LED covers
- Decorative and artistic clear models
- High precision engineering components
Color Description
The clear resin offers a glass like transparent effect allowing for light transmission and aesthetic clarity. Ideal for optical models and showcase prototypes.
Technical Specifications
| Property | Value |
|---|---|
| Working wavelength | 365 to 405 nm |
| Viscosity at 25 C | 280 to 300 mPa s |
| Density | 1.06 to 1.09 g cm3 |
| Hardness Shore D | 83 to 86 |
| Tensile strength | 38 to 45 MPa |
| Elongation at break | 25 to 30 percent |
| Bending strength | 50 to 65 MPa |
| Flexural modulus | 1500 to 2000 MPa |
| Shrinkage | 3.9 to 4.9 percent |
| Shelf life | 18 months |
| Package volume | 1 kg |
Recommended Printing Parameters
| Parameter | Value |
|---|---|
| Layer height | 0.05 mm |
| Normal exposure 10K 14K | 2.0 to 3.6 s |
| Light off delay | 0.5 to 1.0 s |
| Bottom exposure time | 25 to 35 s |
| Bottom layers | 3 to 5 |
| Z lift distance | 5 to 8 mm |
| Z lift speed | 6 to 15 mm s |
| Z retract speed | 6 to 15 mm s |
| Printing temperature | 20 to 30 C |
Compatibility
Compatible with all LCD and DLP resin printers using 365 to 405 nm wavelength including Anycubic Photon Mono series.
Usage Instructions
- Shake the bottle thoroughly for 1 to 3 minutes before use
- Pour the resin into the vat
- Perform an exposure test
- Print using recommended settings
- Filter the resin after printing and return to the bottle
Post Processing
- Rinse the model in clean water or alcohol for 3 minutes
- Air dry completely
- UV cure for 3 minutes until fully solid