Wine Red Metallic PETG Filament ALL3DP China Red RAL 3005 1 kg

Description

Wine Red Metallic PETG Filament ALL3DP China Red RAL 3005 1 kg is a decorative and technical PETG filament for FDM/FFF 3D printing with a deep dark red metallic shade. In the ALL3DP line, this color is presented as China Red Metallic, while the RAL 3005 standard corresponds to Wine Red.

The material combines practical PETG performance with an expressive metallic visual effect. The filament is suitable for housings, decorative models, souvenirs, mockups, prototypes, designer parts, panels, covers, signs and functional elements where a durable material with a rich red metallic appearance is required.

Main Advantages

• Deep red metallic shade: China Red Metallic.
• RAL 3005 Wine Red color standard.
• Practical PETG properties: toughness, durability, moisture resistance and good layer adhesion.
• Better heat resistance compared with standard PLA.
• Metallic visual effect for decorative and presentation models.
• Suitable for housings, mockups, souvenirs, panels, covers and functional parts.
• 1.75 mm diameter compatible with most FDM/FFF 3D printers.

Technical Specifications

Parameter	Value
Brand	ALL3DP
SKU	210
Material	PETG Metal Color
Commercial color name	Metal China Red / China Red Metallic
RAL color	RAL 3005 Wine Red
Color description	Dark red, wine red, burgundy-red metallic
Net weight	1 kg
Filament diameter	1.75 mm
Filament length	approximately 330 m
Printing technology	FDM/FFF
Surface finish	Metallic visual effect, semi-gloss surface

⚙️ Recommended Printing Parameters

Parameter	Recommendation
Nozzle temperature	220–250°C
Bed temperature	70–90°C
Print speed	30–50 mm/s for better surface quality
Cooling fan	low to moderate
Retraction	1–2 mm as a starting point, then tune for your extruder type
Build surface	PEI, glass, textured plate or PETG-compatible adhesive
Slicer profile	PETG / CoPET with temperature, flow and retraction tuning
Enclosure	Not required, but drafts should be avoided

Physical and Visual Properties

• RAL 3005 is a dark wine red shade known as Wine Red.
• China Red is used as the commercial shade name in the PETG Metal Color line.
• The color is not bright scarlet: it is a deep red, burgundy-red or wine red metallic shade.
• The metallic effect looks best on models with smooth surfaces, bevels and rounded geometry.
• For a cleaner surface finish, print outer walls at a stable speed and calibrate the flow rate accurately.

Best Applications

• Decorative models with a red metallic effect.
• Housings for electronics, devices and small equipment.
• Souvenirs, logos, signs and branded elements.
• Mockups, architectural models and presentation prototypes.
• Interior design elements.
• Panels, covers, trims, holders and functional parts.
• Models requiring a rich dark red premium color with a metallic effect.

3D Printer Compatibility

Wine Red Metallic PETG Filament ALL3DP China Red is compatible with most FDM/FFF 3D printers using 1.75 mm filament and supporting PETG printing temperatures. It can be used with Creality Ender, Creality K1, Anycubic Kobra, Prusa, Bambu Lab, Elegoo Neptune, Artillery, FlyingBear, FlashForge and other FDM/FFF machines.

Printing Recommendations

• Make sure the filament is dry before printing: wet PETG may cause stringing, bubbles, popping sounds and uneven surface quality.
• For a cleaner metallic effect, reduce the outer wall speed.
• Avoid excessive cooling, as it may reduce PETG interlayer adhesion.
• Calibrate temperature, flow and retraction on a test model before printing large parts.
• For good first layer adhesion, use a clean build plate and correct nozzle-to-bed distance.
• If stringing appears, slightly lower the nozzle temperature and tune retraction.
• During long prints, check nozzle cleanliness regularly.

Storage Recommendations

• Store the spool in a sealed bag or container with silica gel.
• Do not leave PETG exposed to open air for a long time, especially in humid rooms.
• If bubbles, popping sounds, stringing or rough surfaces appear, dry the filament before use.
• After printing, return the spool to dry storage.

FAQ

 

What is the correct color name?

For a product card, you can use “China Red Metallic PETG” or “Wine Red Metallic PETG”. The technical color standard should be listed as RAL 3005 Wine Red.

Is this a bright red color?

No. RAL 3005 is a dark wine red shade. It is deeper and darker than standard bright red.

Is this standard PETG or PETG with a metallic effect?

This is PETG Metal Color with a decorative metallic visual effect. Printed parts look more expressive than models printed with standard solid-color PETG.

Can I print it on a regular FDM printer?

Yes. The filament is suitable for FDM/FFF 3D printers using 1.75 mm filament if the printer supports PETG printing temperatures.

Is an enclosure required?

An enclosure is usually not required for PETG. Stable room temperature, good first layer adhesion and protection from drafts are usually enough.