Anycubic AirPure 2.0
Anycubic AirPure 2.0 is an external ventilation system for 3D printers. The device is designed for continuous air extraction from the printer chamber and helps create a cleaner and more comfortable workspace.
Description
Anycubic AirPure 2.0 connects the printer to the outside environment. Once activated, the system runs continuously and removes gases from the chamber. The manufacturer presents this solution as a fast ventilation system with support for popular 3D printer models and easy installation.
This is a useful accessory for users of resin printers and fully enclosed FDM printers who want to direct chamber air outside through a ventilation hole or a window.
Key Advantages
- Fast ventilation for the printer chamber
- Continuous operation after activation
- Compatible with mainstream Anycubic printers
- Supports single printer and dual printer operation
- Several air outlet installation options
- Easy installation
Compatibility
The official product page lists compatibility with the following printer models and categories.
| Model or Category | Connection Notes |
|---|---|
| Photon P1 | Compatible |
| Kobra S1 | Compatible |
| Photon Mono M7 Series | Direct connection |
| Photon Mono 4 Series | Requires a raised enclosure adapter that needs to be printed |
| Photon Mono 2 | Compatible |
| Photon Mono M5 Series | Requires a raised enclosure adapter that needs to be printed |
| Resin printers with pre drilled holes | Requires an external hole adapter that needs to be printed |
| Fully enclosed FDM printers | Requires a raised enclosure connection adapter that needs to be printed |
Dual Printer Connection
Anycubic AirPure 2.0 supports operation with one printer or two printers at the same time. For dual printer use, a 3D printed Y shaped connector and an additional air intake tube are required.
Installation Options
For Ventilation Hole
Attach one end of the ventilation system to the printer and the other end to an outdoor vent.
For Sliding Windows
Attach one end of the ventilation system to the printer and the other end to the window opening through an adapter. A printable adapter file is included for this setup.
For Casement Windows
Install hook and loop strips on the window frame and window, attach a window seal, and connect one end of the ventilation pipe to the window seal opening. Hook and loop straps and the window seal kit need to be purchased separately.
Technical Specifications
| Parameter | Value |
|---|---|
| Rated Voltage | 100 - 240 V 50/60 Hz |
| Power Output | 12 V 1 A |
| Fan Speed | 3800 RPM |
| Operating Temperature | 8 - 40 C |
| Operating Humidity | 20 - 90 percent |
| Noise Level | 45 dB |
In the Box
- Main Part
- Exhaust Hose
- Inlet Hose
- Hose Clamp
- Power Adaptor
- User Manual
Who It Is For
Anycubic AirPure 2.0 is suitable for users of Anycubic resin printers and owners of fully enclosed FDM printers who need an organized way to direct chamber air outside. It is a practical solution for a home workshop studio or professional work area.
FAQ
What does Anycubic AirPure 2.0 do?
The device connects the printer to the external environment and continuously removes gases from the chamber after activation.
Which printers are compatible with Anycubic AirPure 2.0?
The official page lists Photon P1 Kobra S1 Photon Mono M7 Series Photon Mono 4 Series Photon Mono 2 and Photon Mono M5 Series.
Can it work with two printers at the same time?
Yes. The system supports single printer and dual printer operation. A Y shaped connector and an additional air intake tube are required for dual printer setup.
Are printed adapters required?
Yes for some installation scenarios. This applies to certain printer series and some enclosure or window connection setups.
Can I vent the air through a window?
Yes. The manufacturer shows installation methods for a ventilation hole sliding windows and casement windows.
What is included in the package?
The package includes the main part exhaust hose inlet hose hose clamp power adaptor and user manual.
Conclusion
Anycubic AirPure 2.0 is a branded ventilation system designed to move air from the 3D printer chamber to the outside. It is built for Anycubic users and supports different installation methods, making it a practical accessory for a modern printing workspace.