Air Heat & Pure Set for Anycubic Photon Series
Air Heat & Pure Set for Photon Series is a multifunctional upgrade module for Anycubic Photon Series resin 3D printers. It combines heated air circulation with air purification to help stabilize the printing environment, improve resin behavior in cooler rooms and reduce resin odor during printing.
Air Heat & Pure Set is especially useful when printing with photopolymer resin in cold seasons or low temperature rooms. Lower resin temperature can increase viscosity, reduce resin flow and make printing less stable. This accessory helps create more consistent conditions inside the printer chamber, which is important for detailed miniatures, prototypes, dental models and technical resin parts.
Main advantages
- Heated air circulation and air purification in one module
- Compatible with selected Anycubic Photon Series models
- SKU S020208
- Helps stabilize temperature during resin printing
- Improves resin flow in cooler environments
- Helps reduce photopolymer resin odor
- Uses replaceable activated carbon filter
- Suitable for regular 405 nm resin printing
- Useful for workshops, 3D printing studios and home resin printing
- Easy installation with adapter and instructions included
Technical specifications
| Product type | Air heating and purification module |
| Product name | Air Heat & Pure Set for Photon Series |
| SKU | S020208 |
| Manufacturer | Anycubic |
| Compatible models | Anycubic Photon Mono M5s, Anycubic Photon Mono M5s Pro, Anycubic Photon M3, Anycubic Photon M3 Max |
| Additional compatibility on official Anycubic page | Photon Mono 4, Photon Mono X 6Ks, when the corresponding product version is selected |
| Set weight | 658 g |
| Package dimensions | 230 x 205 x 110 mm |
| In the package | Air Heat & Pure Unit, Adapter, Instructions |
| Filter type | Replaceable activated carbon filter |
| Main purpose | Air heating, air circulation and resin odor filtration |
| Equipment type | Accessory for LCD MSLA resin 3D printer |
What Air Heat & Pure Set is used for
Photopolymer resin is temperature sensitive. In a cold room, resin can become more viscous, flow more slowly across the release film and require more careful exposure settings. Air Heat & Pure Set helps maintain more stable conditions inside the printer chamber and makes the printing process more predictable.
The second key function is air purification. Resin printing can produce a noticeable photopolymer odor. The activated carbon filtration system helps reduce resin odor inside the workspace and makes resin printer operation more comfortable.
When to use Air Heat & Pure Set
- The printer operates in a cooler room
- Resin becomes too viscous at low temperature
- First layers become unstable
- Prints fail frequently without obvious resin setting changes
- You need to reduce photopolymer resin odor
- You print detailed miniatures, prototypes or technical parts
- You need more stable conditions inside the printer chamber
Important compatibility note
Before ordering, check compatibility with your exact printer model and adapter version. The main product listing specifies compatibility with Photon Mono M5s, Photon Mono M5s Pro, Photon M3 and Photon M3 Max. The official Anycubic page also shows variants for Photon Mono 4 and Photon Mono X 6Ks. For other Photon Series printers, compatibility should be checked separately.
Usage recommendations
- Install the module only in a compatible Anycubic Photon Series printer.
- Turn off the printer and disconnect power before installation.
- Use the included adapter if it is required for your model.
- Do not block the ventilation openings during operation.
- Check the condition of the activated carbon filter regularly.
- Replace the filter when air purification efficiency decreases.
- Do not use the device near an open resin container outside the printer chamber.
- After installation, make sure the module does not interfere with platform movement or the printer cover.
FAQ
Which printers is Air Heat & Pure Set compatible with?
Main compatibility is listed for Anycubic Photon Mono M5s, Photon Mono M5s Pro, Photon M3 and Photon M3 Max. The official Anycubic page also shows variants for Photon Mono 4 and Photon Mono X 6Ks.
What is the SKU of this product?
The product SKU is S020208.
What is included in the package?
The package includes Air Heat & Pure Unit, Adapter and Instructions.
What is air heating used for?
Air heating helps stabilize the temperature inside the printer chamber and improve resin behavior in cooler environments.
What is the activated carbon filter used for?
The activated carbon filter helps reduce photopolymer resin odor during printing.
Can I use this set with any Photon printer?
No. Compatibility should be checked for the exact printer model and adapter version.