Screen Protector for Anycubic Photon Mono X 194 x 123.5 mm 5pcs
Screen protector for Anycubic Photon Mono X 194 x 123.5 mm 5pcs SKU S020050 is a protective film set for the LCD screen of the Anycubic Photon Mono X resin 3D printer. The film is applied over the screen and helps protect it from accidental resin spills, scratches, dust and contamination during printing and maintenance.
The LCD screen is one of the most important and expensive parts of a resin 3D printer. If resin leaks from the vat, the release film is damaged, a print fails or the screen is cleaned carelessly, resin may reach the screen area. A screen protector adds an extra protective layer and helps reduce the risk of LCD damage.
Main Advantages
- Compatible with Anycubic Photon Mono X designed for the LCD screen of this printer model.
- 194 x 123.5 mm film size matched to the screen protection area of Photon Mono X.
- 5pcs set suitable for replacement, regular maintenance and spare storage.
- SKU S020050 for accurate product identification and easier ordering.
- Resin spill protection helps reduce the risk of screen damage if resin leaks from the vat.
- Scratch protection helps protect the LCD surface during cleaning and maintenance.
- Useful maintenance consumable for workshops, service centers and regular resin printing users.
Technical Specifications
| Product name | Screen Protector for Anycubic Photon Mono X 194 x 123.5 mm 5pcs |
| Original product name | Screen protector for Anycubic Photon Mono X 194 x 123.5 mm 5pcs |
| SKU | S020050 |
| Part type | LCD screen protective film |
| Film size | 194 x 123.5 mm |
| Quantity | 5pcs |
| Compatibility | Anycubic Photon Mono X |
| Printer screen size | 8.9″ |
| Printer type | LCD resin 3D printer |
| Purpose | LCD screen protection from resin, scratches, dust and contamination |
| Condition | New maintenance consumable |
Product Description
The screen protector for Anycubic Photon Mono X is designed to be installed over the LCD screen of the resin 3D printer. It helps protect the screen during printing, resin vat maintenance, FEP film replacement, cleaning and removal of resin residue.
The 5pcs set is useful for users who print regularly and want to keep replacement protectors available. If the installed film becomes scratched, cloudy, contaminated with resin or starts lifting at the edges, it should be replaced to maintain clean UV light transmission and reduce print defects.
When Replacement Is Needed
- The protector has deep scratches.
- The film is contaminated with photopolymer resin.
- The surface becomes cloudy or uneven.
- Bubbles, wrinkles or lifting edges appear.
- Cured resin marks remain after a failed print.
- The protector is damaged during screen cleaning or vat maintenance.
- Printing defects appear because of contamination on the protective layer.
Compatibility
This screen protector set is intended for the following printer model:
- Anycubic Photon Mono X
Before ordering, check the exact printer model, film size 194 x 123.5 mm and SKU S020050. Screen protectors for Anycubic Photon Mono X 6K, Photon Mono X2, Photon M3 Plus and other models may have different sizes and compatibility.
Installation Recommendations
- Turn off the 3D printer and disconnect the power cable.
- Remove the resin vat.
- Clean the LCD screen from dust, resin marks and contamination.
- Make sure the screen surface is dry and even.
- Carefully align the protector with the LCD screen.
- Apply the film gradually to avoid bubbles and wrinkles.
- Smooth the surface with a soft card or lint free cloth.
- Make sure the film sits correctly in the active screen area.
- Reinstall the resin vat and check the printer before printing.
Care Tips
- Do not clean the protector with metal tools.
- Do not use sharp objects to remove contamination.
- If resin gets onto the film, remove it carefully without damaging the surface.
- Do not start printing if bubbles or wrinkles are located in the active screen area.
- Check the film condition after every resin leak or failed print.
- Store spare films in a clean dry place away from dust and direct sunlight.
FAQ
What is this product?
It is a 5pcs screen protector set for the LCD screen of the Anycubic Photon Mono X resin 3D printer.
What is the SKU of this screen protector?
The SKU is S020050.
What is the film size?
The screen protector size is 194 x 123.5 mm.
How many protectors are included?
The set includes 5 screen protectors.
Which printer is this film compatible with?
This screen protector is compatible with Anycubic Photon Mono X.
Does it fit Photon Mono X 6K?
No. This product card is prepared for Anycubic Photon Mono X. Photon Mono X 6K requires a different screen protector with a different size and SKU.
When should the screen protector be replaced?
It should be replaced when it becomes scratched, cloudy, contaminated with resin, wrinkled, bubbled or damaged.