FEP Film for Anycubic Photon Mono X, Mono X 6K, M3 Plus, Mono X2, Mono X 6Ks 260 x 175 mm 5 pcs S020055
Anycubic FEP Film S020055 is designed to replace the bottom release film in the resin vat of a photopolymer 3D printer. It is compatible with Anycubic Photon Mono X, Photon Mono X 6K, Photon M3 Plus, Photon Mono X2 and Photon Mono X 6Ks. The set includes 5 FEP films with a size of 260 x 175 mm.
FEP film is an important consumable in resin 3D printing. It is installed on the bottom of the resin vat and separates liquid photopolymer resin from the LCD screen. During printing, each layer is cured through the film and then released from its surface. The condition of the FEP film affects print stability, bottom layer quality, layer release behavior and LCD screen protection from resin leakage.
Main Benefits
- Original FEP film for Anycubic resin 3D printers
- Set of 5 films
- Film size 260 x 175 mm
- Compatible with Anycubic Photon Mono X
- Compatible with Anycubic Photon Mono X 6K
- Compatible with Anycubic Photon M3 Plus
- Compatible with Anycubic Photon Mono X2
- Compatible with Anycubic Photon Mono X 6Ks
- Allows UV light transmission during printing
- Helps the model release correctly from the vat bottom
- Suitable for scheduled resin vat maintenance
- Used when the old film is worn, cloudy, scratched or damaged
Technical Specifications
| Product type | FEP film for resin 3D printer vat |
| Brand | Anycubic |
| SKU | S020055 |
| Quantity | 5 pcs |
| Film size | 260 x 175 mm |
| Material | FEP, fluorinated ethylene propylene |
| Compatible models | Anycubic Photon Mono X, Photon Mono X 6K, Photon M3 Plus, Photon Mono X2, Photon Mono X 6Ks |
| Purpose | Replacement of the release film on the resin vat bottom |
| Category | Consumables and spare parts for resin 3D printers |
Compatibility
| Anycubic Photon Mono X |
| Anycubic Photon Mono X 6K |
| Anycubic Photon M3 Plus |
| Anycubic Photon Mono X2 |
| Anycubic Photon Mono X 6Ks |
When to Replace FEP Film
- When deep scratches appear on the surface.
- When the film becomes cloudy and transmits light less effectively.
- When dents or stretching marks appear on the film.
- When the model releases poorly from the vat bottom.
- When print failures and layer separation become more frequent.
- When there is a risk of resin leaking through damaged film.
- When the film is damaged by a scraper, cured resin or improper cleaning.
Installation Recommendations
- Drain all resin from the vat before replacement.
- Clean the vat from uncured and cured resin residue.
- Remove the old FEP film and check the vat frame for contamination.
- Install the new film evenly without misalignment or wrinkles.
- Tighten screws evenly to achieve proper film tension.
- After installation, check the vat bottom for leakage.
- Before the first print, make sure there is no dust, resin particles or fingerprints on the film.
Care Recommendations
- Do not use sharp metal tools to clean the film.
- Do not press the film with excessive force.
- After a failed print, check the vat bottom for stuck model fragments.
- Filter resin before returning it to the bottle.
- Store spare films in a clean place protected from dust and mechanical damage.
FAQ
Which printers is FEP Film S020055 compatible with?
It is compatible with Anycubic Photon Mono X, Photon Mono X 6K, Photon M3 Plus, Photon Mono X2 and Photon Mono X 6Ks.
How many films are included in the set?
The set includes 5 FEP films.
What is the film size?
The size of one film is 260 x 175 mm.
What is FEP film used for?
FEP film is installed on the resin vat bottom and acts as a release layer between liquid resin, the printed model and the 3D printer screen.
Can I keep printing with scratched FEP film?
If the scratches are deep, the film should be replaced. A damaged surface can reduce print quality and increase the risk of resin leakage.