Description anycubic tough resin 2.0 clear
Anycubic Tough Resin 2.0 Clear — Strong and Flexible Transparent Resin for Precision 3D Printing
Anycubic Tough Resin 2.0 Clear is a next-generation transparent photopolymer resin developed for superior durability, flexibility, and precision. It’s ideal for printing functional components, thin-walled structures, and detailed miniatures that require impact resistance and elasticity. With low shrinkage, minimal odor, and wide printer compatibility, it delivers consistently reliable results.
Key Advantages
- Exceptional Strength: Enhanced flexural strength helps prevent cracks and fractures in thin or small models.
- Flexible Performance: Resists cyclic stress, vibrations, and impacts without delamination or peeling.
- High Detail Accuracy: Low shrinkage ensures clean edges and smooth surfaces.
- Low Odor & Safe: Contains reduced VOCs for comfortable indoor use.
- Broad Compatibility: Optimized for 365–405nm UV wavelengths, best used with Anycubic LCD 3D printers.
Technical Specifications
| Parameter | Value |
|---|---|
| UV Wavelength | 365–405 nm |
| Viscosity (25°C) | 150–250 mPa·s |
| Density | 1.10–1.15 g/cm³ |
| Hardness | 76 Shore D |
| Tensile Strength | 50–60 MPa |
| Tensile Modulus | 800–1200 MPa |
| Flexural Strength | 35–45 MPa |
| Flexural Modulus | 900–1200 MPa |
| Elongation at Break | 30–50% |
| Heat Deflection Temperature | 60–65°C |
| IZOD Impact Strength | 50–60 J/m |
| Shelf Life | 1.5 years |
Instructions for Use
- Before printing: Shake the resin thoroughly. Clean the resin vat and build platform for optimal UV exposure.
- During printing: Pour the resin into the vat and set exposure parameters according to your printer model.
- After printing: Use gloves and tools to remove the model. Rinse in ≥95% isopropyl alcohol. Ultrasonic cleaning is recommended.
- Post-processing: Remove supports, polish if needed, and cure thoroughly under UV light for up to 1 hour.
Precautions
- Store unused resin in a cool, dark place (18–35°C). Avoid direct sunlight and overheating.
- Do not heat above 60°C. If thickened by cold, gently warm it before use.
- Stir well if pigment has settled.
- Do not soak prints in alcohol too long. Remove promptly after cleaning.
- Always perform UV post-curing after cleaning and drying to ensure maximum performance.
- Recommended UV curing:
- 5–10 mW/cm² LED or mercury lamp for no more than 1 hour
- ~1 hour under direct sunlight (summer)
- Avoid prolonged exposure to high-power mercury lamps
Frequently Asked Questions (FAQ)
- Is this resin suitable for mechanical parts?
- Yes. Its high tensile and flexural strength makes it ideal for load-bearing and functional components.
- Is it safe to use indoors?
- Yes. It emits low odor and contains reduced VOCs, making it suitable for home and workshop use.
- What printers are compatible?
- All LCD 3D printers using 365–405nm UV light, including the Anycubic Photon series.
- How should I clean the prints?
- Use ≥95% isopropyl alcohol or resin cleaning fluid. An ultrasonic cleaner is highly recommended.