Description anycubic bio resin gray hd
Anycubic Bio Resin — Eco-Friendly Photopolymer Resin for 3D Printing
Anycubic Bio Resin is a high-quality photopolymer resin with an eco-conscious composition, offering good strength, biocompatibility, and easy post-processing. Perfect for models requiring moderate flexibility and fine detail. Developed with environmental safety in mind, Bio Resin has minimal odor and is suitable for home and educational use.
Advantages of Anycubic Bio Resin:
- Low odor during printing.
- Optimal balance between flexibility and rigidity.
- High detail with minimal shrinkage.
- Compatible with all LCD printers using 365–405 nm UV light.
- Contains bio-based components — safer for the environment.
Technical Specifications (Resin Parameters)
| Parameter | Value |
|---|---|
| UV Wavelength | 365–405 nm |
| Elongation at Break | 21–28% |
| Shrinkage | 4.3–5.5% |
| Flexural Strength | 47–57 MPa |
| Density | 1.13–1.15 g/cm³ |
| Flexural Modulus | 1200–1800 MPa |
| Viscosity | 470–520 mPa·s |
| Heat Distortion Temperature | 60–64 ℃ |
| Hardness | 83–85 Shore D |
| Tensile Strength | 34–40 MPa |
| Bottom Layer Exposure | 20–40 s (up to 60 s for color screens) |
| Normal Exposure | 1.5–3.8 s (up to 60 s for color screens) |
| Cleaning Time | More than 3 minutes in 95% isopropyl alcohol |
| Shelf Life | 1.5 years |
Printing parameters Anycubic Bio Resin
| Модель принтера | Товщина шару | Час експозиції | Час вимкнення світла | Час експозиції нижніх шарів | Кількість нижніх шарів | Анти-аліасінг | Відстань підйому Z | Швидкість підйому Z | Швидкість втягування Z |
|---|---|---|---|---|---|---|---|---|---|
| Photon Mono M7 Max | 0.05mm | 2s | 0.5s | 30s | 5 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Mono M7 | 0.05mm | 2.2s | 1s | 35s | 4 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Mono 4 | 0.05mm | 2.8s | 1s | 30s | 5 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon Mono 4 Ultra | 0.05mm | 2.6s | 1s | 30s | 5 | 1 | 5mm | 8mm/s | 8mm/s |
| Photon Mono M7 Pro | 0.05mm | 1.7s | 2s | 35s | 5 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Mono M5s Pro | 0.05mm | 3.2s | 1s | 35s | 6 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Mono M5 | 0.05mm | 2.8s | 1s | 35s | 6 | 1 | 8mm | 5mm/s | 6mm/s |
| Photon Mono M5s | 0.05mm | 2.8s | 1s | 35s | 6 | 1 | 8mm | 5mm/s | 6mm/s |
| Photon Mono X 6Ks | 0.05mm | 2.5s | 1s | 20s | 6 | 1 | 8mm | 3mm/s | 4mm/s |
| Photon Mono 2 | 0.05mm | 2.5s | 1s | 25s | 6 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon X 6K | 0.05mm | 2s | 1s | 30s | 6 | 1 | 8mm | 2mm/s | 3mm/s |
| Photon Mono M3 Max | 0.05mm | 3s | 2s | 35s | 6 | 1 | 10mm | 4mm/s | 4mm/s |
| Photon Mono D2 | 0.05mm | 2.5s | 1s | 28s | 5 | 1 | 5mm | 2mm/s | 3mm/s |
| Photon M3 Premium | 0.05mm | 2.5s | 1s | 35s | 5 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Mono X2 | 0.05mm | 2.5s | 1s | 25s | 5 | 1 | 8mm | 4mm/s | 4mm/s |
| Photon Mono X | 0.05mm | 2s | 1s | 28s | 6 | 1 | 8mm | 4mm/s | 4mm/s |
| Photon Mono 4K | 0.05mm | 2s | 1s | 40s | 6 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon M3 | 0.05mm | 2s | 1s | 28s | 5 | 1 | 6mm | 3mm/s | 4mm/s |
| Photon M3 Plus | 0.05mm | 1.5s | 1s | 28s | 6 | 1 | 6mm | 6mm/s | 6mm/s |
Instructions for Use
- Shake the resin well before use.
- Clean the build platform and resin vat.
- Pour resin into the vat and set the recommended parameters.
- After printing, wash the model in 95% IPA for at least 3 minutes.
- Dry the model and perform UV curing (recommended: Wash & Cure machine).
Safety Precautions
- Store in a dark place at 18–30°C.
- Do not leave the resin exposed to direct sunlight.
- Wear gloves and avoid direct skin contact.
- Cure the model in a UV chamber or under a proper curing lamp.
Frequently Asked Questions (FAQ)
- Does the resin have a smell?
It has a faint smell, much lower than conventional resins. - Is it suitable for medical models?
Yes, thanks to its biocompatibility, it’s suitable for dental, educational, and similar applications. - Can it be used with color LCD screens?
Yes, but longer exposure times (up to 60 seconds) are needed. - Is it compatible with all printers?
Yes, if they support the 365–405 nm UV range.
Anycubic Bio Resin — Eco Resin for Photopolymer 3D Printing
Anycubic Bio Resin Gray HD is a high-precision plant-based UV resin with a dark gray tone. Designed for professional 3D printing, it offers crisp detail, smooth matte finish, and low odour. Perfect for engineering models, miniatures, and concept parts. Fully compatible with Anycubic LCD and DLP printers.