๐งช Anycubic ABS-Like Resin 2.0: an in-depth guide to ABS-like photopolymer resin for strong, accurate and reliable 3D printing
Anycubic ABS-Like Resin 2.0 is a second-generation ABS-like photopolymer resin for LCD, MSLA and DLP resin 3D printers. It is designed for situations where ordinary standard resin is no longer enough: the model should not only look detailed and clean, but also be stronger, less brittle, more impact-resistant and more practical after post-processing.
Standard photopolymer resins are often selected for decorative models, figurines, mockups and basic resin printing. Anycubic ABS-Like Resin 2.0, however, is better suited for prototypes, housings, technical parts, functional tests, engineering samples, miniatures, paint-ready models and small production runs. It is a material for users who need a balance between detail, dimensional stability, hardness and impact resistance.
The main idea behind this resin lineup is to bring printed parts closer to practical engineering use while preserving the benefits of resin 3D printing: fine detail, sharp edges, smooth surfaces, fast production cycles and a wide color range. The resin works with photopolymer 3D printers using 365 - 405 nm or standard 405 nm UV curing systems.
๐ Why Anycubic ABS-Like Resin 2.0 deserves attention
Resin 3D printing covers many different tasks. One user needs a beautiful figurine, another needs an accurate housing for electronics, another needs a prototype to check fit, and someone else needs a miniature that should not break after the first drop. Standard resin can deliver good detail, but it often loses when practical strength and impact resistance matter. This is where ABS-Like Resin 2.0 becomes especially useful.
This material is not flexible rubber and it is not injection-molded ABS plastic. However, compared with many standard resins, it is better suited for parts that will be handled, assembled, tested, sanded, painted or used in functional and presentation tasks. With proper orientation, correct wall thickness, calibrated exposure and suitable post-curing, this resin can produce very practical results.
โ Features — key advantages of Anycubic ABS-Like Resin 2.0
๐ฏ 1. High Precision & Low Shrinkage
Accuracy is one of the most important advantages of resin 3D printing. Anycubic ABS-Like Resin 2.0 is designed for models with clean edges, smooth surfaces and good reproduction of fine details. Low shrinkage helps reduce deformation, warping, dimensional change and geometry loss after curing.
This is especially important for technical parts, housings, connectors, covers, mounting areas, decorative panels and prototypes where size and shape must remain predictable. With proper exposure calibration, the resin can produce models that hold their shape well and require less post-print correction.
๐ฉ 2. High-Toughness & Resilience
One of the main reasons to choose ABS-like resin is the need for less brittle parts. Anycubic ABS-Like Resin 2.0 is designed as a more practical alternative to basic resin materials. It is better suited for parts that must withstand moderate handling, assembly, fitting, demonstration and everyday use after printing.
The resin is useful for prototypes, brackets, housing components, decorative parts, engineering samples and models that are frequently handled. It does not turn a resin print into molded ABS plastic, but it makes the printed part more practical and less fragile compared with brittle standard resins.
๐ก๏ธ 3. High-Hardness, Impact & Pressure-Resist
The material offers good hardness and resistance to mechanical stress. This is useful for parts that must retain their shape, resist light mechanical load and withstand handling during assembly or demonstration. For functional prototypes, this is a major advantage.
If you print a housing, cover, decorative panel, fastening element or engineering test part, the strength of the resin is only one part of the equation. Wall thickness, reinforcing ribs, print orientation, support density and post-curing quality influence the final result just as much as the material properties.
๐ง 4. High-Fluidity with High Print Success Rate
Good fluidity helps the resin flow back into the print area more quickly and evenly after each lift movement. This reduces the risk of defects caused by insufficient layer filling, bubbles, uneven resin flow or complex geometry.
Low viscosity is especially useful for miniatures, thin walls, complex housings, models with many fine details and large parts with wide layer areas. The resin spreads more evenly in the vat, which helps improve print stability and reduce failures when the settings are properly calibrated.
๐ซ๏ธ 5. Low-Odor
Anycubic presents ABS-Like Resin 2.0 as a low-odor resin, making the workflow more comfortable compared with some stronger-smelling photopolymer materials. However, low odor does not mean that the resin can be used without protection.
Any liquid photopolymer resin requires careful handling: nitrile gloves, eye protection, ventilation and avoidance of skin contact. Liquid resin should not reach bare skin, eyes, unprotected work surfaces, drains or areas accessible to children and pets.
๐งฉ 6. Wide Applications
ABS-Like Resin 2.0 is suitable for a wide range of tasks: technical prototypes, decorative prints, figurines, miniatures, architectural models, housings, covers, brackets, test parts, paint-ready models, R&D samples, presentation parts and small batches.
The wide color selection makes the lineup highly versatile. Gray shades are convenient for prototypes and surface inspection, White and Beige are useful for painting and figurines, Black and Smoky Black are suitable for housings and decorative parts, while Clear and translucent colors are ideal for visual effects, light-transmitting elements and unique design models.
๐งช Where to use Anycubic ABS-Like Resin 2.0
- ๐ง Functional prototypes: checking shape, fit, assembly, mounting points and mechanical layout.
- โ๏ธ Housings and covers: prototype housings for electronics, sensors, panels and small devices.
- ๐ Engineering samples: R&D parts, mockups, test assemblies and design verification parts.
- ๐ญ Figurines and miniatures: detailed models that should be less brittle.
- ๐๏ธ Architectural models: facades, building details, interior elements and scale models.
- ๐จ Paint-ready models: White, Gray and Beige are convenient for priming and painting.
- ๐ก Light-transmitting parts: Clear and Translucent colors are useful for decorative effects.
- ๐ ๏ธ Small-batch parts: short runs of test parts or presentation samples.
- ๐งฑ Parts under moderate load: models requiring more strength than ordinary decorative prints.
- ๐ฎ Gaming accessories: miniatures, tokens, board game elements and custom parts.
๐ File Download — technical files and documentation
For a professional resin category page, technical documents are just as important as product descriptions. They build customer trust, help engineers evaluate the material faster and make the page more useful for professional users.
- ๐ MSDS / SDS — material safety data sheet. It provides information on storage, skin and eye protection, ventilation, liquid resin handling, disposal and safety precautions.
- ๐ TDS — technical data sheet. It is useful for material characteristics, mechanical properties, printing conditions, cleaning and post-curing information.
- ๐ REACH — compliance document related to European chemical safety requirements.
- ๐ RoHS — compliance document related to restrictions of certain hazardous substances.
Website presentation tip: add separate buttons near each document: “Download MSDS”, “Download TDS”, “Download REACH”, “Download RoHS”. This allows users to access the exact file they need and makes the category page look more complete and professional.
๐งฌ Specification — Anycubic ABS-Like Resin 2.0 technical specifications
| Material name | Anycubic ABS-Like Resin 2.0 |
| Material type | ABS-like photopolymer resin |
| Material | Photopolymer Resin |
| Wavelength | 365 - 405 nm |
| Viscosity | 280 mPa·s at 25 โ |
| Density | 1.06 - 1.09 g/cm³ |
| Hardness | 83 - 85 HD |
| Tensile strength | 34 - 42 MPa |
| Elongation at break | 20 - 25% |
| Bending modulus | 45 - 55 MPa |
| Bending strength | 1400 - 1800 MPa |
| Young’s modulus | 1800 - 2200 MPa |
| Izod impact strength | 109 J/m |
| Volume shrinkage rate | 3.9 - 4.9% |
| Pre-print preparation | Shake well before use |
| Print environment | 20 - 40 โ |
| Print temperature | 20 - 50 โ |
| Bottom exposure duration | 28 - 35 s |
| Normal exposure duration | 1.5 - 2.3 s |
| Cleaning | 95% IPA |
| Washing duration | ≥3 mins |
| Post-curing | 405 nm, 18 - 30 โ, 25000 - 30000 uW/cใก, 3 mins |
| Disposal | After full UV curing, resin waste is treated as plastic waste |
๐จ Color Type — Anycubic ABS-Like Resin 2.0 colors
Color in resin 3D printing is not only a visual choice. It affects surface inspection, painting preparation, transparency, light transmission and sometimes exposure calibration. Dark, light and translucent colors may behave slightly differently during printing, so an exposure test is recommended after changing color.
| Official color | HEX | Best use cases |
|---|---|---|
| White | #EFF0F1 | Figurines, architectural models, painting, appearance prototypes |
| Black | #212721 | Housings, technical parts, decorative models |
| Gray | #7E93A7 | Prototypes, engineering models, surface inspection |
| HD Gray | #768692 | Strict technical models, housings, mockups |
| Beige | #FCC89B | Figurines, sculptural models, decorative prints, painting |
| Clear | Not officially specified | Light-transmitting parts, transparent models, display samples |
| Translucent Green | #009A17 | Decorative parts, gaming accessories, light-effect elements |
| Translucent Blue | #077CAB | Appearance prototypes, decorative models, depth-effect parts |
| Translucent Red | #D22630 | Accent parts, gaming models, decorative elements |
| Translucent Yellow | #D5BF39 | Light translucent parts, mockups, design models |
| Smoky Black | #688197 | Housings, decorative prints, models with a softer dark effect |
โ๏ธ Recommended Printing Parameters
The settings below are recommended starting values. They should not be treated as a universal final profile because printing results depend on the printer model, release film condition, resin temperature, layer area, layer height, color, LCD screen age, UV source power and model geometry.
| Printer Model | Exposure Time | Light-Off Time | Bottom Exposure Time | Bottom Layers | Z Lift Distance | Z Lift Speed | Z Retract Speed | Anti-Aliasing Level | Layer Thickness |
|---|---|---|---|---|---|---|---|---|---|
| Photon P1 | 2 s | 2 s | 25 s | 1 | 5 mm | 3 mm/s | 3 mm/s | 4 | 0.05 mm |
| Photon Mono M7 | 2 s | 1 s | 28 s | 5 | 8 mm | 6 mm/s | 6 mm/s | 1 | 0.05 mm |
| Photon Mono M7 Pro | 2 s | 0.5 s | 30 s | 4 | 8 mm | 6 mm/s | 6 mm/s | 1 | 0.05 mm |
| Photon Mono M7 Max | 2 s | 0.5 s | 28 s | 5 | 8 mm | 6 mm/s | 6 mm/s | 1 | 0.05 mm |
| Photon Mono M5 | 2.8 s | 0.5 s | 25 s | 6 | 8 mm | 6 mm/s | 6 mm/s | 1 | 0.05 mm |
| Photon Mono M5s | 3 s | 0.5 s | 25 s | 5 | 8 mm | 6 mm/s | 6 mm/s | 1 | 0.05 mm |
| Photon Mono M5s Pro | 3.6 s | 1 s | 30 s | 5 | 8 mm | 6 mm/s | 6 mm/s | 1 | 0.05 mm |
| Photon Mono 4 | 2.8 s | 1 s | 32 s | 5 | 6 mm | 4 mm/s | 6 mm/s | 1 | 0.05 mm |
| Photon Mono 4K | 2 s | 0.5 s | 40 s | 6 | 6 mm | 4 mm/s | 6 mm/s | 1 | 0.05 mm |
| Photon Mono 4 Ultra | 2.6 s | 0.5 s | 32 s | 5 | 5 mm | 8 mm/s | 8 mm/s | 1 | 0.05 mm |
| Photon Mono 2 | 2.5 s | 1 s | 28 s | 5 | 6 mm | 4 mm/s | 6 mm/s | 1 | 0.05 mm |
| Photon Mono X2 | 2.5 s | 0.5 s | 25 s | 5 | 8 mm | 2 mm/s | 3 mm/s | 1 | 0.05 mm |
| Photon Mono X 6K | 2 s | 0.5 s | 23 s | 6 | 8 mm | 2 mm/s | 3 mm/s | 1 | 0.05 mm |
| Photon Mono X 6Ks | 2.5 s | 0.5 s | 20 s | 6 | 8 mm | 2 mm/s | 3 mm/s | 1 | 0.05 mm |
| ANYCUBIC Photon Mono M3 Max | 3 s | 2 s | 30 s | 6 | 10 mm | 4 mm/s | 4 mm/s | 1 | 0.05 mm |
| ANYCUBIC Photon Mono M3 Premium | 2.5 s | 0.5 s | 25 s | 3 | 8 mm | 6 mm/s | 6 mm/s | 1 | 0.05 mm |
โ 3D printer compatibility
Anycubic ABS-Like Resin 2.0 is compatible with LCD, MSLA and DLP 3D printers that use photopolymer resins in the 365 - 405 nm range or 405 nm. Before serial printing, it is recommended to run an exposure test and calibrate the resin profile for the specific printer model.
Compatible with the following brands and series after calibration:
- Anycubic Photon series: Photon Mono, Photon Mono 2, Photon Mono 4, Photon Mono 4K, Photon Mono 4 Ultra, Photon Mono M5, Photon Mono M5s, Photon Mono M5s Pro, Photon Mono M7, Photon Mono M7 Pro, Photon Mono M7 Max, Photon Mono X, Photon Mono X2, Photon Mono X 6K, Photon Mono X 6Ks, Photon M3, Photon M3 Plus, Photon M3 Premium, Photon M3 Max, Photon D2, Photon Ultra.
- Elegoo: Mars, Saturn, Jupiter series.
- Phrozen: Sonic Mini, Sonic Mighty, Sonic Mega series.
- Creality: HALOT ONE, HALOT SKY, HALOT LITE, HALOT MAGE, HALOT MAGE PRO, HALOT R6 series.
- Uniformation: GK series, including GKtwo and GK3.
- Nova3D: Bene, Elfin, Whale series.
- Peopoly: Phenom, Forge, Moai series.
- Other LCD/MSLA/DLP printers supporting 365 - 405 nm or 405 nm photopolymer resins.
Compatibility depends on wavelength, UV source power, resin profile, exposure time, layer height, release film condition, vat condition, ambient temperature and correct build plate calibration.
Important: this resin is not suitable for FDM/FFF 3D printers because it is a liquid photopolymer, not plastic filament.
๐ Practical printing tips
๐งด 1. Shake the bottle well
Before printing, the bottle should be shaken well. Pigments and resin components can settle during storage, especially if the bottle has been standing still for a long time. If the resin is not mixed properly, color, viscosity and print behavior may become inconsistent.
๐ก๏ธ 2. Watch the temperature
Photopolymer resins are sensitive to temperature. At low temperatures, viscosity increases, resin flows worse, returns to the print zone more slowly and may cause more print failures. A stable warm room without sharp temperature changes is preferred.
๐งฝ 3. Check the release film condition
Even a good resin will not save a print if the release film is cloudy, damaged, stretched or deeply worn. Before important prints, check the vat bottom, film transparency and mechanical condition.
๐งช 4. Run an exposure test when changing color
Different colors may behave slightly differently. Dark, light, clear and translucent resins may require small exposure adjustments. After changing color, it is better to print an exposure test instead of starting a large important model immediately.
๐งฐ 5. Do not under-support complex models
ABS-like resin is good for practical parts, but model geometry still matters. Poor orientation, weak supports, large layer area or insufficient peel compensation can cause defects. For complex models, stronger supports should be used in critical areas.
๐ 6. Avoid excessive post-curing
Post-curing is needed to stabilize the properties of the printed part, but excessive UV curing may make thin details more brittle. This is especially important for thin features, translucent colors and hollow parts.
โ ๏ธ Resin safety
- ๐งค Use nitrile gloves when handling liquid resin.
- ๐ฅฝ Wear eye protection, especially when pouring, washing or removing supports.
- ๐ฌ๏ธ Work in a well-ventilated area.
- ๐ซ Avoid contact of liquid resin with skin and eyes.
- ๐ถ Keep resin away from children, pregnant women and pets.
- โ๏ธ Do not leave the bottle or vat under direct sunlight.
- ๐ฐ Do not pour liquid resin into drains.
- โป๏ธ Fully cure resin waste with UV light before disposal.
โ FAQs
What is Anycubic ABS-Like Resin 2.0?
It is a second-generation ABS-like photopolymer resin for LCD, MSLA and DLP 3D printers. It is designed for stronger, less brittle and more practical prints compared with many standard resins.
What are the main advantages of ABS-Like Resin 2.0?
The main advantages are high precision, low shrinkage, good hardness, impact resistance, balanced strength, good fluidity, low odor and a wide color selection.
How is this resin different from Standard Resin?
Standard Resin is usually used for basic printing and decorative models. ABS-Like Resin 2.0 is better suited for prototypes, housings, technical parts and models that require reduced brittleness and more practical strength.
Is it suitable for Anycubic Photon printers?
Yes. The resin is suitable for the Anycubic Photon series, including Photon Mono, Photon Mono 2, Photon Mono 4, Photon Mono 4K, Photon Mono 4 Ultra, Photon Mono M5, Photon Mono M5s, Photon Mono M5s Pro, Photon Mono M7, Photon Mono M7 Pro, Photon Mono M7 Max, Photon Mono X, Photon Mono X2, Photon Mono X 6K, Photon Mono X 6Ks, Photon M3, Photon M3 Plus, Photon M3 Premium, Photon M3 Max, Photon D2 and Photon Ultra.
Can it be used with Elegoo, Phrozen, Creality and other printers?
Yes, if the printer works with 405 nm or 365 - 405 nm photopolymer resins. Exposure calibration should be performed for the specific printer.
Is this resin suitable for FDM/FFF 3D printers?
No. It is a liquid photopolymer resin for LCD, MSLA and DLP printing. FDM/FFF printers use plastic filament.
Which color is best for prototypes?
Gray and HD Gray are often the most convenient colors for prototypes. Gray shades show surface detail, geometry, relief and surface defects well.
Which color is best for painting?
White, Beige and Gray are convenient for painting. These colors are suitable for priming, surface inspection and decorative models.
Which color should be chosen for a transparent effect?
Clear is the best choice for transparent effects. For colored translucent results, Translucent Green, Translucent Blue, Translucent Red or Translucent Yellow can be used.
Why is the model sticky after printing?
Possible reasons include insufficient washing, resin trapped in recesses, incomplete drying, weak post-curing or incorrect exposure. The model should be washed, dried and cured properly.
Why can prints crack?
Cracks may appear because of excessive alcohol washing, liquid trapped inside hollow areas, aggressive post-curing, thin walls or incorrect model orientation.
Can models be drilled, sanded and painted?
Yes. Models can be carefully sanded, drilled, primed, painted and coated. Mechanical post-processing should be done carefully, especially on thin details.
Should the bottle be shaken before printing?
Yes. The bottle should be shaken well before use so that pigments and resin components are evenly mixed.
Can different ABS-Like Resin 2.0 colors be mixed?
Users sometimes mix compatible colors, but after any mixing an exposure test should be performed because resin behavior may change.
What should be used for washing models?
95% IPA or a compatible cleaning liquid for photopolymer resin prints is recommended.
How long should the model be washed?
The official washing duration is at least 3 minutes. Complex models with cavities, thin features and many supports may require more careful washing.
How long should the model be post-cured?
The official post-curing time is about 3 minutes at 405 nm, 18 - 30 โ and 25000 - 30000 uW/cใก. Larger models may require adjusted curing time.
Can this resin be used for functional parts?
Yes, within reasonable limits. It is suitable for prototypes, test parts, housings and display components. For real loads, the specific model should be tested under working conditions.
How should an opened bottle be stored?
The bottle should be kept tightly closed, away from sunlight, heat sources, children and pets. Shake the resin before using it again.
What should be done with resin left in the vat?
If the resin is clean, it can be filtered through a 100-mesh filter and returned to the bottle. If it contains cured particles, dust or debris, it should not be reused without filtering.
How should resin waste be disposed of?
Liquid resin must not be poured into drains. Resin waste should be fully cured with UV light and disposed of as solid plastic waste according to local rules.
๐ Final conclusion: who should choose Anycubic ABS-Like Resin 2.0?
Anycubic ABS-Like Resin 2.0 is a strong choice for users who want more practical value from resin 3D printing. It is suitable not only for attractive models, but also for prototypes, housings, miniatures, architectural models, technical samples and parts that need better strength than ordinary standard resin.
This lineup is especially interesting because it combines accuracy, low shrinkage, good hardness, impact resistance, fluidity, reduced odor and a wide color palette. If you need a resin for everyday printing, prototyping, painting, decorative models and practical tasks, Anycubic ABS-Like Resin 2.0 can become one of the most versatile photopolymer resin categories in your material range.