Description anycubic abs-like resin v2 white | water-washable & durable uv resin
Anycubic ABS-Like Resin V2 White — Water-Washable, Durable, and Precision Resin
Anycubic ABS-Like Resin V2 White is a water-washable photopolymer resin designed to deliver mechanical performance similar to ABS plastic. It combines excellent toughness, low odor, and a clean white matte finish ideal for prototyping, mechanical parts, and post-processed models that need both functionality and aesthetics.
Key Features
- ABS-Like Toughness: High mechanical strength for load-bearing and functional components.
- Water-Washable Formula: Easily rinsed with water or alcohol. No need for special cleaning agents.
- Matte White Surface: Perfect for showcasing detail and allows easy post-processing or painting.
- Low Shrinkage, High Accuracy: Consistent results with minimal warping and excellent surface finish.
- Low Odor: Suitable for home and enclosed environments thanks to reduced VOC content.
Technical Specifications
| Parameter | Value |
|---|---|
| UV Wavelength | 365–405 nm |
| Viscosity | 180–200 cP·mPa·s |
| Density | 1.1–1.2 g/cm³ |
| Hardness | 80–85 Shore D |
| Tensile Strength | 35–45 MPa |
| Flexural Strength | 40–50 MPa |
| Flexural Modulus | 1000–1200 MPa |
| Elongation at Break | 30–40% |
| Heat Deflection Temperature | 60–65°C |
| Molding Shrinkage | 4.3–5.6% |
| Resin Wash | Water / Alcohol |
| Shelf Life | 1.5 years |
Recommended Printing Parameters
| Setting | Value |
|---|---|
| Layer Thickness | 0.025–0.05 mm |
| Normal Exposure Time | 2–3 s |
| Bottom Exposure Time | 25–35 s |
| Post-Curing Time | 30–60 min (UV 5–10 mW/cm²) |
Instructions for Use
- Before printing: Shake the bottle thoroughly. Clean the resin vat and build platform.
- During printing: Pour resin and set proper exposure values depending on your LCD printer.
- After printing: Use gloves and tools to remove the print. Rinse in water or ≥95% alcohol. Ultrasonic cleaning is recommended.
- Post-processing: Remove supports, polish if necessary, and cure fully under UV light.
Precautions
- Store in a cool, dark environment (18–35°C), sealed and away from sunlight.
- If thickened by cold, warm gently before use (not above 60°C).
- Shake or stir well before use if pigment settles.
- Do not soak prints in water or alcohol for too long.
- Always perform UV post-curing to achieve final material properties.
Frequently Asked Questions (FAQ)
- Can I clean this resin with just water?
- Yes. It is fully water-washable, though alcohol or ultrasonic cleaning improves results.
- Does it smell strongly?
- No. It’s a low-odor formulation suitable for use in home or office setups.
- Is this resin strong enough for working parts?
- Yes. Its ABS-like toughness is ideal for gears, joints, brackets, and tools.
- Can I paint models printed with this resin?
- Yes. The white matte surface is excellent for sanding, priming, and painting.