Anycubic Wash and Cure Max Water Tube
Anycubic Wash and Cure Max Water Tube S020192 is a spare part for the Anycubic Wash and Cure Max washing and curing station. It is used in the liquid supply and circulation system that works with the water and cleaner tanks.
This component helps maintain proper operation of the station liquid circuit. If the tube is damaged, clogged, bent, leaking or no longer allows stable liquid flow, model washing performance may be reduced. Replacing the water tube helps restore stable liquid delivery and proper cleaning system operation after resin 3D printing.
Main Benefits
- Original Anycubic spare part
- Compatible with Anycubic Wash and Cure Max
- SKU S020192
- Used in the water supply system
- Helps maintain stable liquid circulation
- Suitable for repair and maintenance of the post processing station
- Helps restore proper washing cycle operation
- Useful when the old tube is worn, clogged or damaged
Technical Specifications
| Product type | Water tube |
| Brand | Anycubic |
| SKU | S020192 |
| Compatible model | Anycubic Wash and Cure Max |
| Purpose | Water supply and liquid circulation in the washing system |
| Category | Spare parts for washing and curing station |
| Application | Maintenance of the liquid system in a resin post processing station |
Compatibility
| Anycubic Wash and Cure Max |
When Replacement May Be Needed
- When liquid no longer flows normally into the working area of the station.
- When the tube is damaged, bent or visibly worn.
- When water or cleaning solution leakage appears.
- When the tube is clogged with dirt or resin residue.
- When the washing system remains unstable after cleaning.
- When the station has been used for a long time with contaminated liquid.
Installation and Maintenance Recommendations
- Disconnect the station from power before replacement.
- Drain water or cleaning solution from the tanks.
- Check the old tube for clogs, bends and damage.
- Install the new tube without sharp bends or twisting.
- After installation, check that all connections are sealed properly.
- Do not use heavily contaminated liquid because resin residue may clog tubes and filters.
- Clean the tanks and liquid system components regularly.
FAQ
Which machine is this water tube compatible with?
The S020192 water tube is compatible with Anycubic Wash and Cure Max.
What is this tube used for?
It is used in the liquid system of the station and helps deliver water or cleaning solution for model washing.
When should the water tube be replaced?
The tube should be replaced if it is damaged, leaking, clogged, bent or if liquid flow becomes unstable.
Can this tube be used with other Anycubic Wash and Cure stations?
The main compatible model for this SKU is Anycubic Wash and Cure Max. For other models, it is recommended to select parts by the exact device SKU.
Should the system be cleaned after tube replacement?
Yes, after replacement it is recommended to check tanks, connections and filters to make sure liquid circulation is normal.