Anycubic Wash & Cure 3 Plus Barrel Rotor S020185
Anycubic Wash & Cure 3 Plus Barrel Rotor S020185 is an original spare part for the Anycubic Wash & Cure 3 Plus washing and curing station. The part is used in the washing container assembly and helps maintain proper circulation of cleaning liquid during post processing of resin 3D printed models.
The barrel rotor is an important component of the washing system. When operating correctly, it supports liquid movement inside the container, helping remove uncured resin residue from printed parts more effectively. Rotor replacement may be required in case of wear, mechanical damage, poor rotation or reduced washing performance.
Main Benefits
- Original Anycubic spare part
- Compatible with Anycubic Wash & Cure 3 Plus
- Used in the washing container assembly
- Helps maintain circulation of cleaning liquid
- Suitable for maintenance after regular resin printing
- Helps restore proper washing system operation
- Useful for service repair and scheduled maintenance
Technical Specifications
| Product type | Barrel rotor for washing and curing station |
| Brand | Anycubic |
| SKU | S020185 |
| Compatible model | Anycubic Wash & Cure 3 Plus |
| Purpose | Cleaning liquid circulation inside the washing container |
| Category | Spare parts and accessories for Wash & Cure machines |
| Application | Maintenance and repair of resin model washing station |
Compatibility
| Anycubic Wash & Cure 3 Plus |
When Replacement May Be Needed
- When the liquid inside the container no longer circulates properly.
- When unusual noise or vibration appears during washing.
- When the quality of model cleaning becomes worse.
- When the rotor is mechanically damaged.
- When the station has been used for a long time with contaminated alcohol or cleaning solution.
- When cleaning the container does not restore proper washing performance.
Maintenance Recommendations
- Disconnect the station from power before replacing the part.
- Drain the cleaning liquid from the container.
- Clean the container from uncured resin residue.
- Check the rotor mounting area for contamination.
- After installation, make sure the part is seated correctly and evenly.
- Do not use heavily contaminated cleaning liquid because resin residue may affect washing system performance.
FAQ
Which machine is this barrel rotor compatible with?
The S020185 barrel rotor is compatible with Anycubic Wash & Cure 3 Plus.
Is this an original Anycubic spare part?
Yes, this is an Anycubic component for the Wash & Cure 3 Plus station.
What is the purpose of the barrel rotor?
It is used in the washing system and helps create movement of the cleaning liquid inside the container for more effective removal of resin residue from printed models.
When should the rotor be replaced?
Replacement may be required if the part is damaged, liquid circulation becomes weak, noise or vibration appears, or washing quality decreases.
Can this rotor be used with other Wash & Cure models?
The main compatible model for this SKU is Anycubic Wash & Cure 3 Plus. For other machines, it is recommended to select spare parts by the exact SKU and device model.