Resin Vat for Anycubic Photon Mono 2 and Anycubic Mono 4 3D Printer
Anycubic Photon Mono 2 and Anycubic Mono 4 Resin Vat S020137 is an additional tank for photopolymer resin designed for compatible Anycubic resin 3D printers. The resin vat holds liquid resin during printing and is one of the important service parts of a resin 3D printer.
An additional resin vat is especially useful when working regularly with different resin types. It allows faster material changes without pouring resin into another container every time and reduces preparation time. This is convenient for printing with different colors, standard resin, clear resin, ABS Like, Tough, High Speed or other specialty materials.
Main Benefits
- Original Anycubic resin vat
- Compatible with Anycubic Photon Mono 2
- Compatible with Anycubic Mono 4
- SKU S020137
- Designed for resin 3D printing
- Convenient for quick resin type changes
- Useful for keeping a separate vat for a specific color or material
- Helps speed up the workflow between prints
- Suitable for printer maintenance, replacement and workflow expansion
Technical Specifications
| Product type | Resin vat for photopolymer resin |
| Brand | Anycubic |
| SKU | S020137 |
| Compatible models | Anycubic Photon Mono 2, Anycubic Mono 4 |
| Purpose | Holding photopolymer resin during 3D printing |
| Category | Spare parts and accessories for resin 3D printers |
| Application | Resin printing, printer maintenance and quick material changes |
Compatibility
| Anycubic Photon Mono 2 |
| Anycubic Mono 4 |
Why an Additional Resin Vat Is Useful
An additional resin vat helps organize printing with different resin types. For example, one vat can be used for standard gray resin, another for clear resin and another for ABS Like or Tough Resin. This reduces pouring, lowers the risk of material mixing and helps prepare the printer faster for the next task.
When Replacement May Be Needed
- When the vat body is damaged.
- When the bottom film has scratches, dents or visible wear.
- When resin starts leaking through the bottom or film mount.
- When cured resin particles remain inside the vat after printing.
- When the old vat is contaminated with material that is difficult to remove completely.
- When faster resin switching is needed between different printing tasks.
Usage Recommendations
- Before printing, check the vat for scratches, dents and foreign particles.
- Do not exceed the maximum resin fill level.
- After printing, filter resin before returning it to the bottle.
- Clean the resin vat after each use.
- Do not use sharp metal tools to clean the bottom.
- Do not leave resin in the vat for a long time under direct UV light.
- Store the vat in a clean place protected from dust and light.
FAQ
Which printers is this resin vat compatible with?
The S020137 resin vat is compatible with Anycubic Photon Mono 2 and Anycubic Mono 4.
What is a resin vat used for?
A resin vat is used as a tank for liquid photopolymer resin during resin 3D printing.
Why should I buy an additional resin vat?
An additional vat makes resin changes faster, helps keep different materials separate and reduces the need to pour resin between prints.
Should the resin vat be cleaned after printing?
Yes, the resin vat should be cleaned after each use to extend service life and reduce the risk of print defects.
Can one resin vat be used for different resin types?
Yes, but the vat must be cleaned thoroughly before changing material. For convenience, it is better to use separate vats for different resin colors or types.