Resin Vat for Anycubic Photon M3 Premium 3D Printer

Resin Vat for Anycubic Photon M3 Premium 3D Printer is a replacement resin tank for the Anycubic Photon M3 Premium LCD MSLA resin printer. The vat is installed in the printer working area and holds liquid photopolymer resin during printing. It supports correct release film positioning and takes part in the formation of every printed layer.

Resin Vat for 3D printer Anycubic Photon M3 Premium is suitable for replacing a damaged, contaminated or worn resin vat. It is also useful as an additional vat for users who work with different resin colors or resin types and want to reduce cleaning time between printing tasks.

Main advantages

• Original resin vat for Anycubic Photon M3 Premium
• SKU S020123
• Manufacturer Anycubic
• Suitable for LCD MSLA photopolymer printing
• Used for holding resin during printing
• Allows faster switching between resin colors or types
• Useful as a spare vat for regular resin printing
• Has a corner cutout for easier resin pouring
• Has a maximum filling level mark
• Suitable for 405 nm photopolymer resins

Technical specifications

Why an additional resin vat is useful

An additional resin vat is especially useful for regular resin printing. Users can keep different resin types in separate vats, such as standard gray resin, clear resin, water washable resin, ABS Like Resin or Tough Resin. This reduces the amount of resin transfer, lowers the risk of material contamination and helps switch from one printing task to another faster.

When to replace the resin vat

• The vat has mechanical damage
• The frame or film mounting area is damaged
• The vat starts leaking after film installation
• Cracks or deformation appear on the body
• The old vat is heavily contaminated with resin residue
• You need to switch resin colors or types faster
• You need a spare vat for regular printer operation

Important compatibility note

This resin vat is designed for Anycubic Photon M3 Premium. It should not be confused with resin vats for Anycubic Photon M3, Photon M3 Plus, Photon M3 Max, Photon Mono X, Photon Mono X 6K, Photon Mono M5s or other Photon series models. Even if printer names look similar, vat geometry, mounting points and working area dimensions may be different.

Usage recommendations

• Make sure the vat is clean and dry before installation.
• Do not use the vat with damaged release film.
• Before every print, check the vat bottom for scratches, dents and foreign particles.
• Filter resin after every print before returning it to the bottle.
• Do not clean the film with sharp metal tools.
• Do not leave resin in the vat under direct sunlight.
• Clean the vat thoroughly before changing resin type or color.
• Replace the vat if leakage, cracks or deformation appear.

FAQ

Which printer is this resin vat compatible with?

This resin vat is designed for Anycubic Photon M3 Premium.

What is the SKU of this product?

The product SKU is S020123.

What is a Resin Vat used for?

A Resin Vat holds photopolymer resin during printing and supports correct release film positioning through which each model layer is formed.

Can I use one vat for different resins?

Yes, but the vat should be cleaned thoroughly before changing resin. For convenience, it is better to use separate vats for different colors or resin types.

Is this vat compatible with Photon M3 Plus or Photon M3 Max?

No. This item is listed for Anycubic Photon M3 Premium. Photon M3 Plus and Photon M3 Max require separate compatible resin vats.

When should the resin vat be replaced?

Replacement is recommended when the body is damaged, leaking, deformed, the film mounting area is damaged or the vat is heavily contaminated with resin residue.