Resin Vat for Anycubic Photon M3
Description
Resin Vat for Anycubic Photon M3 is a replacement resin tank for the Anycubic Photon M3 resin 3D printer. The vat is installed in the printer working area and is used to hold liquid photopolymer resin during printing.
During resin 3D printing, the resin stays inside the vat, while each model layer is formed through the transparent FEP film at the bottom of the vat. The condition of the vat affects sealing, correct film positioning, print stability and LCD screen safety.
A replacement resin vat is useful for replacing a damaged or worn tank and for faster switching between different resin colors and resin types without constant material pouring. Having an additional vat helps speed up the workflow and reduce printer maintenance time.
Advantages
- Compatible with Anycubic Photon M3
- Original resin vat for photopolymer resin
- Used to hold resin during printing
- Has resin level scale marks
- Suitable for replacing a damaged or contaminated vat
- Convenient for working with different resin colors and types
- Helps reduce cleaning time between print jobs
- Suitable for regular resin 3D printer maintenance
Technical Specifications
| Product name | Resin Vat for Anycubic Photon M3 |
| Full product name | Resin vat for 3D printer Anycubic Photon M3 |
| SKU | S020086 |
| Part type | Resin vat for photopolymer resin |
| Compatibility | Anycubic Photon M3 |
| Design | Resin vat with level scale marks |
| Purpose | Holding photopolymer resin during printing |
| Compatible materials | 405 nm photopolymer resins |
| Printer type | LCD resin 3D printer |
| Category | Resin vats for Anycubic resin 3D printers |
When to Replace the Resin Vat
- The vat is damaged or deformed
- Resin leakage appears
- Mounting or positioning parts are damaged
- The vat bottom does not hold the FEP film properly
- The vat is heavily contaminated with cured resin residue
- Fast switching between resin types is required
- A spare vat is needed for regular resin printing
Compatibility
This resin vat is intended for Anycubic Photon M3. Before ordering, check the printer model and SKU S020086. Anycubic Photon M3 Plus, Photon M3 Max, Photon M3 Premium, Photon Mono X, Photon Mono 2 and other models use different resin vats.
Important Difference
This product is a resin vat. It is not FEP film, not an LCD screen protector, not an LCD screen, not a build plate and not a UV LED module. FEP film is installed at the bottom of the vat, while the vat itself holds photopolymer resin during printing.
Usage Recommendations
- Make sure the vat is clean and dry before installation
- Check the FEP film condition before every important print
- Do not exceed the recommended resin level
- Filter resin after a failed print before reusing it
- Do not use sharp tools on the FEP film surface
- Do not leave the vat with resin under direct UV light
- Clean the vat thoroughly when changing resin type
- If leakage appears, stop printing immediately and inspect the vat
Suitable Applications
- Replacing a damaged Anycubic Photon M3 resin vat
- Printing with 405 nm photopolymer resins
- Working with different resin colors
- Working with different resin types
- Printing miniatures and figures
- Printing prototypes and master models
- Regular resin 3D printer maintenance
FAQ
Is this resin vat compatible with Anycubic Photon M3
Yes, this resin vat is intended for the Anycubic Photon M3 resin 3D printer.
What is the SKU of Resin vat for 3D printer Anycubic Photon M3
The SKU of this part is S020086.
Is this a resin vat or FEP film
This is a resin vat. FEP film is a separate consumable part installed at the bottom of the vat.
Can this vat be used for Photon M3 Plus
No, this vat is listed for Anycubic Photon M3. Photon M3 Plus requires another compatible vat model.
Can I keep several vats for different resins
Yes, an additional vat is useful for working with different resin colors and photopolymer resin types.
When should the resin vat be replaced
The resin vat should be replaced if it is damaged, deformed, leaking, does not hold the FEP film correctly or is heavily contaminated with cured resin.