Print Platform for Anycubic Photon Mono and Photon Mono 4K
Print Platform for 3D Printer Anycubic Photon Mono / Mono 4K Build Plate SKU S020068 / S020062 is a replacement aluminum build plate for Anycubic Photon Mono and Anycubic Photon Mono 4K resin 3D printers. The platform is used to form printed models layer by layer during photopolymer resin printing.
The build plate is one of the key working parts of a resin 3D printer. The first layers, supports and model base must adhere to its surface during printing. Platform condition directly affects adhesion, first layer stability, print reliability and the overall success rate of printed parts.
Main Advantages
- Compatible with Anycubic Photon Mono suitable for servicing this resin 3D printer model.
- Compatible with Anycubic Photon Mono 4K can be used as a replacement build platform for Mono 4K.
- SKU S020068 and S020062 help identify the correct spare part when ordering.
- Aluminum construction provides rigidity, stability and convenient use.
- Working surface for resin printing designed for layer by layer model formation.
- Sloped surface design helps excess photopolymer resin drain from the platform after printing.
- Easy installation and removal useful for regular maintenance and replacement.
- Service spare part suitable for workshops, repair centers and regular resin printing users.
Technical Specifications
| Product name | Print Platform for Anycubic Photon Mono and Photon Mono 4K |
| Original product name | Print Platform for 3D Printer Anycubic Photon Mono / Mono 4K Build Plate |
| SKU | S020068 / S020062 |
| Part type | Print platform / Build Plate |
| Material | Aluminum |
| Purpose | Layer by layer formation of photopolymer resin models |
| Compatibility | Anycubic Photon Mono, Anycubic Photon Mono 4K |
| Printer type | LCD resin 3D printer |
| Installation area | Z axis assembly and build platform holder |
| Condition | New replacement part |
Product Description
The print platform for Anycubic Photon Mono / Mono 4K is used as the base surface where the resin model is formed during printing. The platform moves up and down along the Z axis, while each layer is cured through the LCD screen and attached to the previous layer.
If the platform surface is damaged, heavily scratched, deformed, contaminated with cured resin or no longer provides proper adhesion, prints may fail. Common problems include first layer separation, model detachment, support failure, uneven adhesion and unstable printing. Replacing the build plate helps restore reliable printer operation.
When Replacement Is Needed
- Printed models do not adhere to the platform properly.
- First layers often detach during printing.
- The working surface is damaged, deformed or heavily worn.
- Cured resin residue cannot be safely removed from the platform.
- The platform was damaged during model removal.
- Calibration or leveling problems appear.
- A spare build plate is needed to speed up the printing workflow.
Compatibility
This build platform is intended for the following printer models:
- Anycubic Photon Mono
- Anycubic Photon Mono 4K
Before ordering, check the printer model, platform appearance and SKU S020068 / S020062. Build plates for Photon Mono 2, Photon Mono X, Photon Mono X 6K, Photon M3 and other models may have different dimensions, mounting design and geometry.
Recommended Use
- Install the build plate into the printer holder and secure it firmly.
- Perform platform calibration before the first print.
- Make sure the working surface is clean and free from cured resin.
- After printing, let excess resin drain back into the vat.
- Remove the model carefully to avoid damaging the platform surface.
- Clean the platform after model removal.
- Before the next print, make sure the platform is dry, clean and correctly leveled.
Care Tips
- Do not use excessive force when removing printed models.
- Do not damage the working surface with sharp tools.
- Do not leave resin residue on the platform for a long time.
- Check the platform surface regularly for flatness and cleanliness.
- Always recalibrate the printer after replacing the build plate.
- Store spare platforms in a clean dry place away from dust and direct sunlight.
FAQ
What is this part?
It is a replacement build plate for Anycubic Photon Mono and Anycubic Photon Mono 4K resin 3D printers.
Which SKUs are listed for this platform?
This platform is listed with SKU S020068 and S020062.
Is it compatible with Anycubic Photon Mono?
Yes, this print platform is compatible with Anycubic Photon Mono.
Is it compatible with Anycubic Photon Mono 4K?
Yes, this print platform is compatible with Anycubic Photon Mono 4K.
What is the purpose of a build plate?
The build plate is the surface where the resin model is formed during printing. The first layers and supports must adhere firmly to it.
Do I need to calibrate the printer after replacing the platform?
Yes. Calibration is recommended after installing a new build plate to ensure the correct distance between the platform, vat film and LCD screen.
Does this platform fit Photon Mono X or Photon Mono 2?
This product card is prepared for Anycubic Photon Mono and Photon Mono 4K. Photon Mono X, Photon Mono 2 and other models require separate build plates with different geometry and mounting.