Anycubic PLA Filament Brown 1kg 1.75 mm for 3D Printer
Description
Anycubic PLA Filament Brown 1kg 1.75 mm is a high quality filament for FDM 3D printing. It is suitable for decorative models, prototypes, mockups, souvenirs, educational projects, decor elements, figures, architectural models and everyday printing. Brown color is a practical choice for wood like visual effects, natural shades, landscape mockups, miniatures, stands, cases and models with a warm organic look.
Anycubic PLA Filament Brown 1kg is convenient for beginners and experienced users. The material feeds steadily through the extruder, is easy to configure, does not usually require an enclosed chamber and is compatible with most FDM 3D printers that use 1.75 mm filament.
Advantages
- Natural brown color for decorative and themed models
- Suitable for mockups, souvenirs, figures and decor elements
- Standard 1.75 mm filament diameter
- Easy print setup without an enclosed chamber
- Stable material feeding through the extruder
- Good detail reproduction and clean model surface
- Suitable for beginners
- Compatible with most FDM 3D printers
Technical Specifications
| Product name | Anycubic PLA Filament Brown 1kg |
| SKU | AHPLBR |
| Material type | PLA filament |
| Filament type | General filament |
| Color | Brown |
| Color code | #927968 |
| Net weight | 1 kg |
| Filament diameter | 1.75 mm |
| Recommended nozzle diameter | 0.2 mm or above |
| ACE compatibility | Compatible |
| Intelligent identification | Supported |
| Reusable filament spool | Supported |
Recommended Printing Parameters
| Nozzle temperature | 190-230 C |
| Heated bed temperature | 55-56 C |
| Recommended printing speed | 50-200 mm/s |
| Cooling time | 8 s |
| Maximum volume speed | 12 mm3/s |
| Dry out before use | Recommended |
| Drying condition | 45-50 C for 6-8 h |
Physical Properties
| Density | 1.24 g/cm3 |
| Melt index | 4-10 g/10 min at 190 C and 2.16 kg |
| Melting point temperature | 166 C |
| Vicat softening temperature | 55 C |
| Heat deflection temperature | 54 C at 0.45 MPa |
Mechanical Properties
| Youngs modulus | 2534 MPa |
| Tensile strength | 48 MPa |
| Elongation at break | 8% |
| Bending modulus | 3360 MPa |
| Bending strength | 90 MPa |
| Izod impact strength X-Y | 22 kJ/m2 |
| Tensile strength Z | 26 MPa |
Best Application Areas
- Decorative models and figures
- Building, landscape and interior mockups
- Souvenirs and gift items
- Toys and themed parts
- Models with wood like or natural color effects
- Stands, organizers, holders and cases
- Educational projects and prototypes
Compatibility with 3D Printers
Anycubic PLA Filament Brown 1.75 mm is compatible with FDM 3D printers that support 1.75 mm PLA filament. It is suitable for Anycubic Kobra, Anycubic Kobra 2, Anycubic Kobra 2 Neo, Anycubic Kobra 2 Pro, Anycubic Kobra 2 Plus, Anycubic Kobra 2 Max, Anycubic Kobra 3, Anycubic Kobra 3 Combo, Anycubic Kobra 3 Max Combo, Anycubic Kobra S1, Creality, Bambu Lab, Prusa, Elegoo, QIDI, Artillery, Flashforge, Kingroon and Sovol.
Printing Recommendations
- Start printing with a nozzle temperature of 200-210 C and adjust after a test model
- Use a heated bed temperature of 55-56 C for stable first layer adhesion
- Enable part cooling after the first layers
- Use moderate speed for decorative models
- If stringing appears, tune retraction and slightly reduce nozzle temperature
- If the surface becomes rough, check moisture level and dry the spool
Storage Recommendations
Store Anycubic PLA Filament Brown in a dry place away from moisture, direct sunlight and high temperature. After printing, keep the spool in a sealed bag or dry box with silica gel. If the filament has been stored open for a long time, dry it at 45-50 C for 6-8 h before printing.
Why Buy This Filament
Anycubic PLA Filament Brown 1kg is a good choice for users who need stable PLA material in a natural brown shade. It is suitable for decorative models, mockups, souvenirs, figures, wood like visual effects, design parts and everyday FDM 3D printing.
FAQ
Is this filament suitable for beginners?
Yes, PLA filament is suitable for beginners because it is easy to configure, does not usually require an enclosed chamber and prints well on most FDM 3D printers.
What printing temperature is recommended for this filament?
The recommended nozzle temperature for Anycubic PLA Filament Brown is 190-230 C.
What bed temperature is needed for printing?
The recommended heated bed temperature is 55-56 C.
Is an enclosed chamber required for printing?
No, an enclosed chamber is usually not required for PLA. Proper nozzle temperature, bed adhesion and cooling are more important.
Can this plastic be printed on Creality, Bambu Lab and Prusa printers?
Yes, this plastic can be printed on Creality, Bambu Lab and Prusa printers if the printer supports 1.75 mm PLA filament.
Do I need to dry PLA filament before printing?
Drying is recommended if the spool has been stored open for a long time or if there are moisture signs such as popping sounds, bubbles, stringing and rough surface quality.
Which models are best suited for brown color?
Brown color is best suited for mockups, decorative parts, souvenirs, figures, wood like models, landscape elements, stands, cases and interior decor.