LCD Screen for Anycubic Photon M3 Max
Description
LCD Screen for Anycubic Photon M3 Max is a replacement part for restoring the correct operation of a resin 3D printer. The screen forms the image of each layer and provides accurate exposure of photopolymer resin during printing.
This screen model is designed for Anycubic Photon M3 Max and is used to replace a damaged, worn or incorrectly working display matrix. With a large 13.6″ size and 7K resolution, the screen provides high detail, sharp model geometry and even image transmission across the working area.
Advantages
- Compatible with Anycubic Photon M3 Max 3D printer
- Large 13.6″ screen for large format resin printing
- 7K resolution 6480 x 3600 pixels
- Monochrome LCD matrix for stable layer exposure
- Helps restore print quality after old screen wear
- Suitable for large models, prototypes, miniatures, master models and technical parts
Technical Specifications
| Product name | LCD Screen for Anycubic Photon M3 Max |
| SKU | S020106 |
| Product type | LCD screen for resin 3D printer |
| Compatible model | Anycubic Photon M3 Max |
| Screen size | 13.6″ |
| Resolution | 7K 6480 x 3600 pixels |
| Screen type | Monochrome LCD screen |
| Purpose | Layer image formation during resin printing |
| Category | Spare parts for Anycubic Photon M3 Max |
Compatibility
The screen is compatible with the Anycubic Photon M3 Max resin 3D printer. Before purchasing, it is recommended to check the exact printer model, old screen marking and ribbon cable connection type.
When to Replace the LCD Screen
- The screen test shows dark spots, lines or inactive areas
- Printed models have missing or empty zones
- Layers are exposed unevenly
- The screen has mechanical damage
- Print defects remain after film replacement and resin setting adjustment
- The printer displays the image incorrectly or does not show the exposure test properly
Installation Recommendations
- Disconnect the printer from power before replacement
- Remove the old screen carefully to avoid damaging the ribbon cable and connector
- Do not touch the working surface of the screen with sharp objects
- Prevent resin from getting onto the new LCD screen
- Run an exposure test after installation
- Check build plate calibration before the first print
- Using a screen protector is recommended
FAQ
Is this LCD screen compatible with Anycubic Photon M3 Max?
Yes, this screen is designed for the Anycubic Photon M3 Max resin 3D printer.
What is the screen resolution?
The screen has 7K resolution 6480 x 3600 pixels.
What is the screen size?
The screen size is 13.6″.
Do I need calibration after replacing the screen?
Yes, after installing a new LCD screen it is recommended to run an exposure test and calibrate the build plate.
Do I need a screen protector?
Yes, a screen protector helps reduce the risk of screen damage from accidental resin spills or vat removal.