Photopolymer resin Anycubic 405nm UV resin, ECO is an environmentally friendly biodegradable photopolymer with low shrinkage.
This photopolymer is designed to work with DLP LCD 3D printers that polymerize models with a wavelength of 395-405 nanometers: Anycubic Photon, Wanhao Duplicator 7 (D7), Wanhao Duplicator 7 (D7) Plus, Wanhao Duplicator 8 (D8), Wanhao Gadoso Revolution 1 and others that print using stereolithography (DLP) technology.
The resin has an excellent combination of hardness and strength, low shrinkage, and a high cure rate. Due to its fluidity, it perfectly reproduces finely detailed elements of objects, provides high-precision prototyping.
Features of Anycubic 405nm UV resin, ECO eco-friendly photopolymer resin:
- Biodegradable photopolymer made from soybean oil, free of VOCs and no harmful chemicals.
- Suitable for most DLP LCD 3D printers. Sensitive to ultraviolet light 355~405nm.
- The low viscosity of the resin makes it easy to clean the printer and model
- Resin is stable in various climatic conditions
- Optimal curing time for Anycubic Photon and Anycubic Photon S, best print quality.
When working with any resin for 3D printing, we recommend taking precautions: use a protective mask and gloves and avoid getting the resin on the skin and mucous membranes.
SPECIFICATIONS
| Wavelength range for polymerization: | 355-410 nm (nanometers) |
| Shrink ratio: | 3.74-4.24% |
| Tensile strength: | 59 – 70 Mpa |
| Elongation at break: | 11-20% |
| Shore hardness of fully cured polymer: | 84 D |
| Viscosity (25℃): | 300 mPas |
| Density: | 1.05-1.25 g/cm3 |
| Print Layer Thickness: | from 35 microns |
| Recommended baking time for layers: | 6-10 seconds |
| Volume: | 1l |