Detergent Bucket for Anycubic Wash & Cure Max
Detergent Bucket for Anycubic Wash & Cure Max is a replacement container for the Anycubic Wash & Cure Max post processing station. This spare part is used for holding and supplying cleaning liquid during the washing process of resin 3D printed models.
The detergent bucket is suitable for replacing a damaged, worn, contaminated or lost original container. It helps maintain the correct washing workflow of the Wash & Cure Max station and supports the use of IPA, ethanol or another cleaning liquid compatible with the resin material used for printing.
Main Advantages
- Compatible with Anycubic Wash & Cure Max designed specifically for this post processing station.
- SKU S020165 for accurate spare part identification and easier ordering.
- Replacement detergent container suitable for damaged, cracked, leaking or heavily contaminated original buckets.
- For cleaning liquid used with IPA, ethanol or another suitable cleaner for resin 3D printing post processing.
- Supports stable washing performance helps the station remove uncured resin from printed models correctly.
- Useful spare part for service suitable for workshops, service centers and resin 3D printing studios.
Technical Specifications
| Product name | Detergent Bucket for Anycubic Wash & Cure Max |
| Original product name | Detergent bucket Wash & Cure Max |
| Alternative name | Detergent Container for Wash & Cure Machine |
| SKU | S020165 |
| Part type | Detergent container |
| Purpose | Storage and supply of cleaning liquid inside the post processing station |
| Compatibility | Anycubic Wash & Cure Max |
| Equipment type | Washing and UV curing station for resin 3D printing |
| Compatible liquids | IPA, ethanol or another cleaner compatible with the resin material |
| Condition | New replacement part |
Product Description
The Detergent Bucket for Anycubic Wash & Cure Max is an important replacement part for the washing system of the station. During resin model post processing, the machine uses cleaning liquid to remove uncured resin from printed parts. The detergent bucket stores the cleaner and helps the station perform the washing cycle properly.
This part may need replacement if the original container is damaged, cracked, leaking, contaminated with resin residue or no longer seals correctly. A clean and properly functioning detergent bucket is especially important for users who process resin models regularly and want stable washing performance.
When Replacement Is Needed
- The detergent bucket has cracks or mechanical damage.
- The container is leaking.
- The inside of the bucket is heavily contaminated with resin residue.
- The container no longer seals correctly.
- The original bucket was damaged during cleaning or maintenance.
- A spare detergent bucket is needed for faster service and replacement.
Compatibility
This spare part is intended for the following post processing station:
- Anycubic Wash & Cure Max
Before ordering, check the exact station model and SKU. Compatibility with other Wash & Cure models, including Wash & Cure 3, Wash & Cure 3 Plus and Wash & Cure 3 Max, should be checked separately because the shape, size and construction of the containers may be different.
Recommended Use
- Turn off the Anycubic Wash & Cure Max station before replacing the container.
- Carefully remove the old detergent bucket.
- Check the installation area for resin residue, dirt or blockage.
- Install the new detergent bucket in the correct position.
- Add the proper cleaning liquid.
- Close the cover and make sure the container is installed correctly.
- Run a short test cycle without a model if needed.
- After checking, use the station in normal mode.
Care Tips
- Check the detergent bucket regularly for cracks, leaks and resin contamination.
- Do not leave heavily contaminated cleaning liquid inside the container for a long time.
- Filter used IPA or ethanol when possible to extend its usable life.
- Do not pour resin contaminated liquid directly into the drain.
- Store IPA and ethanol in a closed container away from heat, flame and direct sunlight.
- Always wear gloves when working with uncured resin and cleaning liquid.
- Do not use aggressive solvents unless they are recommended for the resin and equipment.
FAQ
What is Detergent Bucket Wash & Cure Max?
It is a detergent container used in the Anycubic Wash & Cure Max station for cleaning resin 3D printed models after printing.
What is the SKU of this spare part?
The SKU is S020165.
Which station is this detergent bucket compatible with?
This detergent bucket is compatible with Anycubic Wash & Cure Max.
Does this bucket fit Anycubic Wash & Cure 3 Max?
This product card specifies compatibility with Anycubic Wash & Cure Max. Compatibility with Wash & Cure 3 Max should be checked separately.
What liquids can be used in this container?
For standard resin, IPA or ethanol is commonly used. For water washable resin, water can be used only when allowed by the resin manufacturer.
When should the detergent bucket be replaced?
It should be replaced if it is cracked, leaking, heavily contaminated, damaged during maintenance or no longer seals correctly.
Can this bucket be used as a spare container?
Yes. A spare detergent bucket is useful for workshops, service centers and users who regularly process resin models and need quick container replacement.
Can resin contaminated liquid be poured into the drain?
No. Liquid contaminated with uncured resin should not be poured directly into the drain. Resin residue should be cured and disposed of safely according to local rules.