Anycubic ABS-Like Resin+ photopolymer resin is suitable for most LCD 3D printers and is optimized for 3D printing with wavelengths from 365nm to 405nm, and applicable to all kinds of models, cases and parts with strict requirements, such as industrial spare parts , building models, DIY, industrial design, daily design and other kinds of high strength models.
Peculiarities
Superior Tensile Strength, High Strength: Anycubic ABS-like resin+ strikes the perfect balance between tensile strength and hardness. On the one hand, it is not brittle and is not easy to break due to its high elongation at break. On the other hand, the impact resistance quality provides strength.
Strong formula, low odor: Anycubic ABS-like resin+ has a low odor and less worries about pungent odor due to the strong formula.
Long shelf life: Shelf life is one and a half years, which is longer than many other resins; In any case, please stir or shake the resin bottle several times before use.
Wide Compatibility: Sensitive to 365-405nm wavelength, widely used in the production of models with high strength requirements, such as engineering parts and industrial parts.
Balancing softness and strength, Anycuic ABS like Resin withstands bending, bending and compression. It shows good strength and elongation, as well as the ability to resist cracking when drilling holes.
Parts printed with Anycubic ABS like Resin are impact resistant and have high impact strength. In addition, it can withstand strong impacts and other high-strength mechanical loads.
It can provide high precision, smooth surface, clear print details, and low shrinkage advantages in model printing. Reduced content of volatile organic compounds. Weak smell.
Parameter information:
Main material: resin monomer and photoinitiator
Exposure parameters: exposure time at start (s) 15-40 s, normal exposure time (s) 3-10 s
Wavelength 365 - 405 nm
Density - 1.05 - 1.25 g/cm3
Viscosity - 220-250 MPa (at 25 degrees C)
Hardness - 84 Shore D
Tensile strength - 35-55 MPa
Elongation at break - 20-30%
Tensile modulus - 1400-1600 MPa
Bending strength - 50-60 MPa
Modulus of elasticity in bending - 1500-1600 MPa
Storage method:
Store away from direct sunlight at room temperature (sunlight contains a lot of ultraviolet radiation, which causes the photosensitive resin to harden. After testing with light, it is not affected if it is not ultraviolet light). Sunlight contains a lot of ultraviolet light, which causes the photosensitive resin to harden.
It is recommended to keep at an ambient temperature of 15 ℃ -35 ℃, the lower the temperature, the higher the viscosity of the resin. Leaky storage, excessive dust or moisture can affect print quality.
Shake well before use, do not use the resin in places where there is a lot of sunlight.
Before use, put on gloves to avoid direct contact of the resin with the skin, and ensure the room is well ventilated.
In case of accidental contact of resin with skin, wash immediately with plenty of water. If you feel unwell, seek medical attention.
Printed models should use a high concentration of alcohol to clean for about 30s (recommended concentration is 95% or more, the higher the better).
Do not pour resin from the resin tank into the unused resin without cleaning it, do not leave the resin in the resin tank for a long time without use, in order to avoid contamination of the resin affecting the printing effect (for a long time, the resin can be stored either in a sealed container or in a sealed polyethylene film tray for printing, keeping the shading).
The resin has a shelf life of up to 18 months.
Anycubic ABS-Like Resin+ photopolymer resin is suitable for most LCD 3D printers and is optimized for 3D printing with wavelengths from 365nm to 405nm, and applicable to all kinds of models, cases and parts with strict requirements, such as industrial spare parts , building models, DIY, industrial design, daily design and other kinds of high strength models.
Peculiarities
Superior Tensile Strength, High Strength: Anycubic ABS-like resin+ strikes the perfect balance between tensile strength and hardness. On the one hand, it is not brittle and is not easy to break due to its high elongation at break. On the other hand, the impact resistance quality provides strength.
Strong formula, low odor: Anycubic ABS-like resin+ has a low odor and less worries about pungent odor due to the strong formula.
Long shelf life: Shelf life is one and a half years, which is longer than many other resins; In any case, please stir or shake the resin bottle several times before use.
Wide Compatibility: Sensitive to 365-405nm wavelength, widely used in the production of models with high strength requirements, such as engineering parts and industrial parts.
Balancing softness and strength, Anycuic ABS like Resin withstands bending, bending and compression. It shows good strength and elongation, as well as the ability to resist cracking when drilling holes.
Parts printed with Anycubic ABS like Resin are impact resistant and have high impact strength. In addition, it can withstand strong impacts and other high-strength mechanical loads.
It can provide high precision, smooth surface, clear print details, and low shrinkage advantages in model printing. Reduced content of volatile organic compounds. Weak smell.
Parameter information:
Main material: resin monomer and photoinitiator
Exposure parameters: exposure time at start (s) 15-40 s, normal exposure time (s) 3-10 s
Wavelength 365 - 405 nm
Density - 1.05 - 1.25 g/cm3
Viscosity - 220-250 MPa (at 25 degrees C)
Hardness - 84 Shore D
Tensile strength - 35-55 MPa
Elongation at break - 20-30%
Tensile modulus - 1400-1600 MPa
Bending strength - 50-60 MPa
Modulus of elasticity in bending - 1500-1600 MPa
Storage method:
Store away from direct sunlight at room temperature (sunlight contains a lot of ultraviolet radiation, which causes the photosensitive resin to harden. After testing with light, it is not affected if it is not ultraviolet light). Sunlight contains a lot of ultraviolet light, which causes the photosensitive resin to harden.
It is recommended to keep at an ambient temperature of 15 ℃ -35 ℃, the lower the temperature, the higher the viscosity of the resin. Leaky storage, excessive dust or moisture can affect print quality.
Shake well before use, do not use the resin in places where there is a lot of sunlight.
Before use, put on gloves to avoid direct contact of the resin with the skin, and ensure the room is well ventilated.
In case of accidental contact of resin with skin, wash immediately with plenty of water. If you feel unwell, seek medical attention.
Printed models should use a high concentration of alcohol to clean for about 30s (recommended concentration is 95% or more, the higher the better).
Do not pour resin from the resin tank into the unused resin without cleaning it, do not leave the resin in the resin tank for a long time without use, in order to avoid contamination of the resin affecting the printing effect (for a long time, the resin can be stored either in a sealed container or in a sealed polyethylene film tray for printing, keeping the shading).
The resin has a shelf life of up to 18 months.