Anycubic PLA Silk Dual Color Black Gold Filament
✨ Description
Anycubic PLA Silk Dual Color Black Gold Filament AHSC07 is a 1.75 mm decorative dual color PLA Silk filament with an eye catching Black Gold color combination. It is designed for FDM 3D prints where gradient visual effect, silky gloss, premium appearance and expressive surface quality are especially important.
The combination of #212721 and #C8B643 creates a shifting visual effect when the model is rotated: one side shows a deep black tone, while the other side reveals a golden silky highlight. This effect works especially well on figurines, statues, trophies, art objects, decorative housings, souvenirs, cosplay parts, logos and presentation models.
🌟 Key Advantages
- ✅ Dual color Black Gold effect: black + gold
- ✅ Gradient visual transition when the model is rotated
- ✅ Smooth glossy silk like surface
- ✅ Controllable Luster: gloss can be adjusted by nozzle temperature and print speed
- ✅ Superior Flexibility for stable feeding in ACE Pro
- ✅ ACE Compatibility supported
- ✅ Intelligent Identification supported on compatible Anycubic systems
- ✅ Reusable Filament Spool supported
📌 Technical Specifications
| Product Name | Anycubic PLA Silk Dual Color Black Gold Filament |
| SKU | AHSC07 |
| Material Type | PLA Silk Dual Color |
| Color | Black Gold |
| HEX Code | #212721, #C8B643 |
| Filament Diameter | 1.75 mm |
| Net Weight | 1 kg |
| Filament Type | Aesthetic decorative PLA filament |
| ACE Compatibility | Compatible |
| Intelligent Identification | Supported |
| Reusable Filament Spool | Supported |
⚙️ Recommended Printing Parameters
| Printing Temperature | 210-240 ℃ |
| Heated Bed Temperature | 55-56 ℃ |
| Recommended Printing Speed | 50-250 mm/s |
| Maximum Volume Speed | 8 mm³/s |
| Nozzle Size | 0.4 mm or above |
| Dry Out Before Use | Recommended |
| Drying Condition | 55-65 ℃, 6-8 h |
| Cooling | Active cooling is recommended for a clean decorative surface |
🧪 Physical Properties
| Density | 1.22 g/cm³ |
| Melt Index | 9±1 g/10 min |
| Melting Point Temperature | 164 ℃ |
| Vicat Softening Temperature | 54 ℃ |
| Heat Deflection Temperature | 53 ℃ at 0.45 MPa |
🔩 Mechanical Properties
| Young's Modulus X-Y | 2000±200 MPa |
| Tensile Strength X-Y | 37±4 MPa |
| Tensile Strength Z | 12±4 MPa |
| Elongation at Break X-Y | 28±5% |
| Bending Modulus X-Y | 2400±160 MPa |
| Bending Strength X-Y | 66±4 MPa |
| Izod Impact Strength X-Y | 20±2 kJ/m² |
🎯 Best Applications
- 🏆 Trophies, awards, souvenirs and premium gift models
- 🗿 Statues, figurines, collectibles and fandom models
- 🎨 Art objects, design models and decorative elements
- 🎭 Cosplay parts, masks, covers and costume elements
- 📢 Logos, signs, plates and presentation details
- 🏠 Interior decor with a black and gold silk like effect
- 🤖 Sci-fi models, robots, housings and technical decor
🧰 Printer Compatibility
Anycubic PLA Silk Dual Color Black Gold Filament 1.75 mm is compatible with most FDM 3D printers that support 1.75 mm PLA filament and a nozzle temperature range of 210-240 ℃.
It can be used with Anycubic, Creality, Bambu Lab, Prusa, Elegoo, Artillery, Sovol, Flashforge and other compatible FDM 3D printers. 1.75 mm filament may also be used with Bambu Lab AMS when the spool fits correctly and the filament is loaded properly. Intelligent Identification works only with compatible Anycubic systems, requires an internet connection and supported Anycubic intelligent identification-compatible filament.
📄 File Download
- RoHS
- TDS
💡 Printing Recommendations
- Use a stable nozzle temperature within 210-240 ℃ for a clean glossy silk like finish.
- A higher nozzle temperature or slower printing speed can increase the smooth high gloss silk effect.
- For decorative models, a layer height of 0.16-0.2 mm is recommended.
- To make the dual color effect more visible, orient the model so that visible outer walls reveal both sides of the filament.
- Dry the filament at 55-65 ℃ for 6-8 h before important prints if the spool has been open for a long time.
- Store the spool in a dry place and seal it after use.
❓ FAQ
Is this filament suitable for beginners?
Yes. PLA Silk Dual Color is suitable for beginners and is easier to print than PETG, ASA or TPU. Correct nozzle temperature, print speed and model orientation help achieve a better black and gold silk effect.
What nozzle temperature is recommended?
The recommended printing temperature is 210-240 ℃.
What bed temperature is recommended?
The recommended heated bed temperature is 55-56 ℃.
Is an enclosed chamber required?
No. An enclosed chamber is not required for PLA Silk printing.
Can I use it with Creality, Bambu Lab and Prusa printers?
Yes. It can be used with compatible 1.75 mm FDM printers that support the required temperature range.
Should I dry the filament before printing?
Drying is recommended if the spool has been open for a long time or if extrusion becomes unstable. Use 55-65 ℃ for 6-8 h.
How is Dual Color different from standard PLA Silk?
Dual Color contains two colors in one filament strand. During printing, the model gets a shifting visual effect depending on the viewing angle and the orientation of the part on the build plate.
What models are best for Black Gold?
Black Gold is especially suitable for premium souvenirs, awards, statues, logos, decorative prints, cosplay elements and models that need an elegant black and gold visual accent.