Anycubic ABS-Like Resin Pro 2 Grey 1 kg

Anycubic ABS-Like Resin Pro 2 Grey 1 kg is a grey ABS-like photopolymer resin for LCD, MSLA and DLP resin 3D printers using 365-405 nm UV light. It is designed for strong, accurate and more impact-resistant prints, including functional prototypes, housings, brackets, clips, engineering parts, fixtures, architectural models, miniatures and display samples.

Grey resin is one of the most versatile choices for engineering and decorative 3D printing. The neutral grey color makes surface relief, geometry, fine details, layer lines and post-processing defects easier to inspect, which is especially useful for prototypes, figurines, technical models and parts intended for priming or painting.

Anycubic ABS-Like Resin Pro 2 Grey combines ABS-like strength, good resilience, low viscosity, stable detail reproduction and reduced odor compared with many standard resins. It is a practical material for applications where ordinary standard photopolymer resin may be too brittle.

⚙️ Key Advantages of Anycubic ABS-Like Resin Pro 2 Grey

• ABS-like performance — a good balance of rigidity, strength and resilience for functional printing.
• Improved impact resistance — suitable for prototypes, housings, brackets, clips and technical parts.
• Reduced brittleness — 35-40% elongation at break helps lower the risk of cracking.
• Low viscosity — 300-400 mPa·s at 25 ℃ supports smooth flow and stable layer formation.
• Accurate detail reproduction — 4.3-5.6% volume shrinkage helps preserve dimensions, fittings and fine details.
• Grey / Gray color — convenient for quality inspection, prototypes, miniatures, mockups and painting.
• Low odor — more comfortable to use, while liquid resin still requires gloves, eye protection and ventilation.
• Wide compatibility — suitable for LCD, MSLA and DLP resin 3D printers using 365-405 nm UV light.

📌 Best Applications

• functional prototypes and engineering parts;
• electronic housings and outer shells;
• snap-fit parts, clips, brackets and mounting components;
• load-bearing structural parts;
• tooling fixtures, jigs and production aids;
• anime figures, game miniatures and collectible models;
• architectural models and presentation samples;
• models for priming, painting and post-processing;
• structural R&D prototypes and functional test parts.

🎨 Color and Appearance

Parameter	Value
Official color	Gray / Grey
HEX code	#7E93A7
Appearance	Neutral grey shade that makes relief, geometry and fine model details easier to inspect

⚙️ Technical Specifications

Specification	Value
Material type	Photopolymer resin
Resin type	ABS-like functional resin
Color	Grey / Gray
Net weight	1 kg
UV wavelength	365-405 nm
Viscosity	300-400 mPa·s at 25 ℃
Density	1.05-1.25 g/cm³
Hardness	82-84 HD / Shore D
Tensile strength	35-45 MPa
Elongation at break	35-40%
Flexural modulus	40-45 MPa
Flexural strength	1400-1800 MPa
Young’s modulus	1600-1800 MPa
Izod impact strength	212 J/m according to the product page
Volume shrinkage	4.3-5.6%
Printing temperature	20-50 ℃
Recommended print environment	20-40 ℃
Cleaning	95% IPA / isopropyl alcohol
Washing duration	≥3 min
Post-curing UV wavelength	405 nm
Curing temperature	18-30 ℃
UV intensity	25000-30000 uW/c㎡
Post-curing time	3 min

⚙️ Recommended Printing Parameters

The settings below are official starting parameters for 0.05 mm layer height. Before production printing, run an exposure calibration test because the final result depends on resin temperature, LCD screen condition, UV power, release film type, layer height, model geometry and the exact printer profile.

Printer Model	Exposure Time	Light-Off Time	Bottom Exposure Time	Bottom Layers	Z Lift Distance	Z Lift Speed	Z Retract Speed	Anti-Aliasing Level	Layer Thickness
Photon P1	2 s	2 s	25 s	1	5 mm	3 mm/s	3 mm/s	4	0.05 mm
Photon Mono M7	2.2 s	0.5 s	35 s	4	8 mm	6 mm/s	6 mm/s	1	0.05 mm
Photon Mono M7 Pro	2 s	0.5 s	25 s	4	8 mm	6 mm/s	6 mm/s	1	0.05 mm
Photon Mono M7 Max	2 s	0.5 s	30 s	5	8 mm	6 mm/s	6 mm/s	1	0.05 mm
Photon Mono M5	2.8 s	0.5 s	25 s	5	8 mm	5 mm/s	6 mm/s	1	0.05 mm
Photon Mono M5s	2.8 s	0.5 s	25 s	5	8 mm	5 mm/s	6 mm/s	1	0.05 mm
Photon Mono M5s Pro	3.6 s	0.5 s	30 s	5	8 mm	6 mm/s	6 mm/s	1	0.05 mm
Photon Mono 4	2.8 s	1 s	30 s	5	6 mm	4 mm/s	6 mm/s	1	0.05 mm
Photon Mono 4K	2 s	0.5 s	40 s	6	6 mm	4 mm/s	6 mm/s	1	0.05 mm
Photon Mono 4 Ultra	2.6 s	1 s	30 s	5	5 mm	8 mm/s	8 mm/s	1	0.05 mm
Photon Mono 2	2.5 s	1 s	25 s	5	6 mm	4 mm/s	6 mm/s	1	0.05 mm
Photon Mono X2	2.5 s	0.5 s	20 s	5	8 mm	2 mm/s	3 mm/s	1	0.05 mm
Photon Mono X 6K	2 s	0.5 s	23 s	6	8 mm	2 mm/s	3 mm/s	1	0.05 mm
Photon Mono X6Ks	2.5 s	0.5 s	20 s	5	8 mm	3 mm/s	4 mm/s	1	0.05 mm
Anycubic Photon M3 Max	3 s	2.5 s	35 s	6	10 mm	2 mm/s	3 mm/s	1	0.05 mm
Anycubic Photon M3 Premium	2.5 s	0.5 s	25 s	4	8 mm	6 mm/s	6 mm/s	1	0.05 mm

✅ Resin 3D Printer Compatibility

Anycubic ABS-Like Resin Pro 2 Grey is suitable for LCD, MSLA and DLP resin 3D printers using 365-405 nm or 405 nm UV-curing photopolymer resin. Before production printing, run an exposure test and calibrate the resin profile for the specific printer, temperature, layer height and release film condition.

• Anycubic Photon series: Photon Mono, Photon Mono 2, Photon Mono 4, Photon Mono 4K, Photon Mono 4 Ultra, Photon Mono M5, Photon Mono M5s, Photon Mono M5s Pro, Photon Mono M7, Photon Mono M7 Pro, Photon Mono M7 Max, Photon Mono X, Photon Mono X2, Photon Mono X 6K, Photon Mono X 6Ks, Photon M3, Photon M3 Plus, Photon M3 Premium, Photon M3 Max, Photon D2, Photon Ultra.
• Elegoo: Mars, Saturn, Jupiter series.
• Phrozen: Sonic Mini, Sonic Mighty, Sonic Mega series.
• Creality: HALOT ONE, HALOT SKY, HALOT LITE, HALOT MAGE, HALOT MAGE PRO, HALOT R6 series.
• Uniformation: GK series, including GKtwo and GK3.
• Nova3D: Bene, Elfin, Whale series.
• Peopoly: Phenom, Forge, Moai series.
• Also suitable for other LCD / MSLA / DLP printers supporting 365-405 nm or 405 nm photopolymer resins after exposure calibration.

Important: compatibility depends on wavelength, UV power, resin profile, exposure time, layer height, release film condition, vat condition, ambient temperature and build plate calibration. This resin is not suitable for FDM / FFF 3D printers because it is a liquid photopolymer, not plastic filament.

🧪 Printing Recommendations

• Shake the bottle thoroughly before use to distribute pigment and resin components evenly.
• Clean the resin vat, build platform and check the transparency of the release film.
• Make sure the release film is not damaged and the build plate is calibrated.
• Recommended working temperature starts from 20 ℃. At low temperature, resin becomes more viscous.
• Do not fill the resin vat above the maximum level.
• Use proper model orientation and sufficient supports for functional parts.
• Do not leave printed models in alcohol for too long after washing.

🧼 Cleaning and Post-Processing

1. Remove the printed model from the build platform using a scraper.
2. Remove supports with flush cutters or another suitable tool.
3. Wash the model in 95% IPA or a compatible resin cleaner.
4. Dry the model thoroughly before final curing.
5. Post-cure with 405 nm UV light for about 3 min.
6. Filter remaining resin through a 100-mesh filter before reuse.

🛡️ Safety and Storage

• Wear nitrile gloves, safety goggles and work in a well-ventilated area.
• Avoid contact of liquid resin with skin, eyes and clothing.
• Store the bottle tightly closed, away from sunlight and UV sources.
• Keep liquid resin away from children, pets and food-contact surfaces.
• Fully cure resin waste with UV light before disposal.
• Do not describe liquid resin as “completely safe” or “non-irritating”: liquid photopolymer resin requires protection and ventilation.

📄 File Download: technical files and certificates

• MSDS / SDS — material safety data sheet.
• TDS — technical data sheet.
• REACH — REACH / SVHC compliance report.
• RoHS — RoHS compliance report.

❓ FAQ

 

What is Anycubic ABS-Like Resin Pro 2 Grey used for?

It is suitable for functional prototypes, housings, brackets, fixtures, miniatures, architectural models, decorative parts and models intended for painting.

Why is grey resin convenient for 3D printing?

Grey resin makes shape, relief, surface texture and fine details easier to inspect. It is convenient for quality checking, display prototypes, figurines and painting workflows.

Can this resin be used for technical parts?

Yes. ABS-Like Resin Pro 2 is designed for functional parts, prototypes, snap-fit parts, brackets and housings. For highly loaded parts, separate geometry and application testing is recommended.

What UV wavelength is required?

The resin is designed for resin 3D printers using 365-405 nm UV light, especially 405 nm LCD, MSLA and DLP printers.

How should printed models be cleaned?

Use 95% IPA / isopropyl alcohol. After washing, dry the model completely before final UV curing.

Is this resin suitable for FDM printers?

No. This is a liquid photopolymer resin for resin 3D printers. It is not suitable for FDM / FFF printers that use plastic filament.

 

✅ Why Buy Anycubic ABS-Like Resin Pro 2 Grey 1 kg

• universal grey color for prototypes, mockups, figurines and painting;
• ABS-like strength for functional resin printing;
• good balance of rigidity, resilience and impact resistance;
• low viscosity and stable detail reproduction;
• official starting parameters for popular Anycubic Photon printers;
• suitable for hobby use, prototyping, engineering applications and small-batch printing.

---