2K Quad HD LCD Screen for Anycubic Photon S
Description
2K Quad HD LCD Screen for Anycubic Photon S is a replacement part for restoring the correct operation of a resin 3D printer. The screen is used to form each layer of the model during printing and is responsible for accurate image transfer to the photopolymer resin.
This part is suitable for replacing a damaged, worn or incorrectly working screen in the Anycubic Photon S printer. After installing a new LCD screen, the printer can again expose layers with high detail and stable model geometry.
Advantages
- Compatible with Anycubic Photon S 3D printer
- 2K Quad HD resolution for detailed resin printing
- Used to restore print quality
- Suitable for replacing a damaged or worn LCD screen
- Helps solve layer exposure problems and image defects
- Suitable for miniatures, prototypes, decorative models and technical parts
Technical Specifications
| Product type | LCD screen for resin 3D printer |
| Compatible model | Anycubic Photon S |
| Resolution | 2K Quad HD |
| Purpose | Layer image formation during resin printing |
| Installation type | Internal screen replacement |
| Category | Spare parts for Anycubic Photon S |
Compatibility
The LCD screen is designed for the Anycubic Photon S 3D printer. Before purchasing, it is recommended to check the printer model, connector type and compatibility with your device version.
When to Replace the Screen
- Printed models have missing areas or blank zones
- The printer does not expose the layer evenly
- The screen test shows dark or bright defective areas
- The screen has visible mechanical damage
- Print quality becomes unstable without resin setting changes
Installation Recommendations
- Disconnect the printer from power before installation
- Remove the old screen carefully without damaging the ribbon cable and connector
- Prevent resin from getting on the new LCD screen
- Run an exposure test after installation
- Check build plate calibration before printing
- Using a screen protector is recommended
FAQ
Is this LCD screen compatible with Anycubic Photon S?
Yes, this screen is designed as a replacement screen for the Anycubic Photon S resin 3D printer.
Can I install the screen myself?
Yes, self installation is possible if the printer is disassembled carefully. It is important to disconnect the power, avoid damaging the ribbon cable and connect the new screen correctly.
Do I need calibration after replacing the screen?
Yes, after replacing the screen it is recommended to run an exposure test and calibrate the build plate before the first print.
Why does the screen fail?
The LCD screen can wear out due to long term UV exposure, overheating, resin leakage, mechanical damage or normal working life.
Do I need a screen protector?
Yes, a screen protector helps reduce the risk of screen damage from resin spills or vat removal.