2K Quad-HD LCD Screen for Anycubic Photon
Description
2K Quad-HD LCD Screen for Anycubic Photon is a replacement exposure screen for the classic Anycubic Photon resin 3D printer. The screen is used in the layer formation system and creates the image of each layer during photopolymer resin printing.
During printing, UV light passes through the LCD screen and exposes resin only in the areas that match the current model layer. The condition of the screen affects contour accuracy, fine detail quality, exposure stability, curing uniformity and overall print results.
The screen has 2K 2560 x 1440 px resolution. This resolution is suitable for printing miniatures, figures, prototypes, decorative parts, master models and small functional objects. LCD screen replacement is required when lines, dark zones, overexposed spots, missing layer areas appear or when the exposure test shows damaged areas.
Advantages
- Compatible with the classic Anycubic Photon
- Replacement LCD exposure screen for a resin 3D printer
- 2K 2560 x 1440 px resolution
- Used to form the image of each layer
- Helps restore correct UV resin exposure
- Suitable for repair and service maintenance
- Helps solve print defects caused by screen damage
- Not a touch control display
- Not an LCD screen protector
Technical Specifications
| Product name | 2K Quad-HD LCD Screen for Anycubic Photon |
| Full product name | 2K Quad-HD LCD Screen for Photon |
| SKU | S020021 |
| Part type | LCD exposure screen for resin 3D printer |
| Compatibility | Anycubic Photon |
| Resolution | 2K 2560 x 1440 px |
| Purpose | Layer image formation and UV exposure of photopolymer resin |
| Printer type | LCD resin 3D printer |
| Compatible materials | 405 nm photopolymer resins |
| Category | LCD screens for Anycubic resin 3D printers |
When to Replace the LCD Screen
- Printed models show lines, spots or repeated defects
- Part of the model does not print because of dead zones on the screen
- The screen has been damaged after resin leakage
- Cracks, dark areas or overexposed zones appear on the screen
- Resin exposure becomes uneven
- The printer does not show the correct layer image during exposure test
- Print quality becomes worse with the same resin settings
- Diagnostics confirm an LCD screen fault
Compatibility
This 2K Quad-HD LCD screen is intended for the classic Anycubic Photon. Before ordering, check the printer model, old screen, ribbon cable connection and SKU S020021. Anycubic Photon S, Photon Zero, Photon Mono, Photon Mono 4K, Photon Mono 2, Photon D2 and other models may use different screens.
Important Difference
This product is the LCD exposure screen for Anycubic Photon. It is not the touch control display, not an LCD screen protector, not FEP film for the resin vat, not a resin vat, not a build plate and not a UV LED module. Before ordering, check the printer model, product name and SKU S020021.
Installation Recommendations
- Turn off the printer completely and disconnect power before replacement
- Remove the resin vat and build platform
- Clean the working area from dust and resin residue
- Take a photo of the ribbon cable connection before removing the old screen
- Do not bend the screen ribbon cable or pull it with force
- Do not touch the screen surface with dirty or wet hands
- After installation, check that all connections are correct
- Run an exposure test before printing
- If you do not have electronics repair experience, contact a qualified technician
Usage Recommendations
- Always check the vat FEP film condition before printing
- Do not allow resin to leak onto the LCD screen
- Use a screen protector for additional protection
- Do not clean the screen with sharp tools
- After a failed print, check the vat bottom for cured resin residue
- Clean the working area from dust regularly
- Use correct exposure settings for the selected resin
Suitable Applications
- Repair of Anycubic Photon
- Replacement of a damaged LCD screen
- Restoring correct layer exposure
- Printing miniatures and figures
- Printing small prototypes
- Printing master models and decorative parts
- Service maintenance of a resin 3D printer
FAQ
Is this LCD screen compatible with Anycubic Photon
Yes, this LCD screen is intended for the classic Anycubic Photon.
What is the SKU of 2K Quad-HD LCD Screen for Photon
The SKU of this part is S020021.
What is the screen resolution
The screen resolution is 2K 2560 x 1440 px.
Is this the touch control display
No, this is the LCD exposure screen for layer image formation. The touch control display is a different part.
Is this a screen protector
No, this is the LCD screen itself. A screen protector is a separate consumable accessory.
Is this FEP film for the resin vat
No, this is not FEP film. FEP film is installed in the resin vat, while the LCD screen is located under the exposure area.
Can this screen be used for Photon S
This product card is prepared for Anycubic Photon. Photon S compatibility should be checked separately by model, ribbon cable and SKU.
When should the LCD screen be replaced
The LCD screen should be replaced if cracks, dead zones, lines, spots, uneven exposure, resin leakage damage or confirmed diagnostic faults appear.