FEP Film for Anycubic Photon M3 Max 390 x 263 mm 2 pcs
Anycubic FEP Film S020100 is designed to replace the bottom release film in the resin vat of the Anycubic Photon M3 Max resin 3D printer. The set includes 2 films with a size of 390 x 263 mm, suitable for the large Photon M3 Max resin vat and 13.6″ printer format.
FEP film is an important consumable for LCD resin 3D printing. It is installed on the bottom of the resin vat and acts as a transparent release layer between liquid photopolymer resin, the printed model and the printer screen. The condition of the film affects layer release stability, print quality, model accuracy and LCD screen protection from resin leakage.
Main Benefits
- Original Anycubic FEP film
- Compatible with Anycubic Photon M3 Max
- Set of 2 films
- Film size 390 x 263 mm
- Suitable for the large Photon M3 Max resin vat
- Allows UV light transmission during printing
- Helps the model release correctly from the vat bottom
- Used when the old film is worn, cloudy, scratched or damaged
- Suitable for regular resin 3D printer maintenance
Technical Specifications
| Product type | FEP film for resin 3D printer vat |
| Brand | Anycubic |
| SKU | S020100 |
| Quantity | 2 pcs |
| Film size | 390 x 263 mm |
| Compatible model | Anycubic Photon M3 Max |
| Compatible format | 13.6″ Photon M3 Max |
| Material | FEP |
| Purpose | Replacement of the release film on the resin vat bottom |
| Category | Consumables and spare parts for resin 3D printers |
Compatibility
| Anycubic Photon M3 Max |
When to Replace FEP Film
- When deep scratches appear on the surface.
- When the film becomes cloudy and transmits light less effectively.
- When dents, stretching marks or deformation appear.
- When the model releases poorly from the vat bottom.
- When layer separation or print failures become more frequent.
- When there is a risk of resin leaking through damaged film.
- When the film is damaged by a scraper, cured resin or improper cleaning.
Installation Recommendations
- Drain all resin from the vat before replacement.
- Clean the vat from uncured and cured resin residue.
- Remove the old FEP film and check the vat frame for contamination.
- Install the new film evenly without misalignment, wrinkles or dust.
- Tighten screws evenly to achieve proper film tension.
- After installation, check the vat bottom for leakage.
- Before the first print, make sure there are no resin particles, dust or fingerprints on the film.
Care Recommendations
- Do not use sharp metal tools to clean the film.
- Do not press the film with excessive force.
- After a failed print, check the vat bottom for stuck model fragments.
- Filter resin before returning it to the bottle.
- Store spare films in a clean place protected from dust and mechanical damage.
FAQ
Which printer is FEP Film S020100 compatible with?
FEP Film S020100 is compatible with the Anycubic Photon M3 Max resin 3D printer.
How many films are included in the set?
The set includes 2 FEP films.
What is the film size?
The size of one film is 390 x 263 mm.
What is FEP film used for?
FEP film is installed on the resin vat bottom and acts as a release layer between liquid resin, the printed model and the 3D printer screen.
Can I print with scratched FEP film?
If scratches are deep or the film becomes cloudy, it is better to replace it. Damaged film can reduce print quality and increase the risk of resin leakage.