Anycubic ABS-Like Resin Pro photopolymer is a 3D printing resin with excellent mechanical and physical characteristics. The polymer has properties similar to ABS plastic and, after polymerization, has all its advantages.
The resin is intended for professional printing applications such as prototyping in various industries. The material has sensitivity to ultraviolet radiation in the range of 355-410 nm, so it is suitable not only for Anycubic printers, but also for equipment from other manufacturers.
Anycubic ABS-Like Resin Pro is easy to work with and gives a smooth finish. Due to its low shrinkage, the resin allows you to print parts with fairly thin walls.
The fully polymerized resin has increased strength and flexural elongation compared to previous Anycubic resins. The finished parts bend quite well, but are not brittle, which makes them resistant to shock loads.
Another advantage of this polymer is its long shelf life. Preservation of properties for 2 years, subject to all storage rules, allows the resin to be used for a long time.
| Are common | |
| Brand | Anycubic |
| Manufacturer country | China |
| Basic | |
| Type of photopolymer | Engineering |
| Printer illumination technology | SLA |
| Illumination spectrum | 365 - 405 nm |
| Shore hardness | 86 - 88 D |
| Viscosity | 400 - 500 MPa*s |
| Elongation at break | 20 - 30% |
| Density | 1.05 - 1.25 g/cm3 |
| Tensile strength | 45 - 70 MPa |
| Shrinkage | 3.4 - 4.0% |
| Wash | Alcohol |
| Dimensions and weight | |
| Product dimensions | 100x100x280 mm |
| Packaging dimensions | 110x110x300 mm |
| Net weight | 1 kg |
| Gross weight | 1.2 kg |