Wash & Cure 3 Plus Gooseneck Light
Description
Wash & Cure 3 Plus Gooseneck Light is a replacement flexible UV light for the Anycubic Wash & Cure 3 Plus post-processing station. The light is used during the UV curing stage of resin model post-processing and helps additionally cure hard-to-reach zones, corners, deep details, inner cavities, fine elements and complex geometry.
After printing on a resin 3D printer, the model should be washed from uncured resin residue and then UV cured. The main curing system performs general model curing, while the flexible Gooseneck Light allows targeted UV exposure for areas that are harder to cure evenly with standard lighting only.
This part is especially useful for post-processing miniatures, figures, engineering prototypes, decorative objects, dental models, enclosure parts and models with many fine details. The flexible design makes it possible to direct UV light closer to the required area and improve final curing quality.
Advantages
- Compatible with Anycubic Wash & Cure 3 Plus
- Used for targeted UV curing of resin printed models
- Helps cure corners, grooves, holes and internal zones
- Flexible design allows UV light to be directed into the needed area
- Suitable for final post-processing after model washing
- Useful for models with complex geometry and fine details
- Helps improve curing uniformity for hard-to-reach areas
- Suitable for replacing a damaged or lost station light
Technical Specifications
| Product name | Wash & Cure 3 Plus Gooseneck Light |
| Full product name | Wash & Cure 3 Plus Gooseneck Light |
| SKU | S020187 |
| Part type | Flexible UV light, FlexiCure light, targeted curing light |
| Compatibility | Anycubic Wash & Cure 3 Plus |
| Purpose | Additional UV curing of complex and hard-to-reach model areas |
| Recommended distance to model | 1 to 3 cm |
| Curing energy | Up to 30000 uW/cm2 within the 1 to 3 cm working range |
| Post-processing type | UV curing of photopolymer resin models |
| Category | Spare parts and accessories for Anycubic post-processing stations |
When to Replace the Gooseneck Light
- The light does not turn on
- UV output becomes weak or unstable
- The flexible neck is damaged or does not hold position
- The connector, body or light element is damaged
- The light was lost during station maintenance
- Targeted curing of complex areas becomes insufficient
- Diagnostics confirm a light fault
Compatibility
This flexible UV light is intended for Anycubic Wash & Cure 3 Plus. Before ordering, check the station model and SKU S020187. Anycubic Wash & Cure 3 uses a different flexible UV light with another SKU, so these parts should not be confused.
Important Difference
This product is a flexible UV light for targeted curing. It is not a cure table, washing bucket, basket, cover, barrel rotor, display board or the Wash & Cure 3 Plus machine itself. Before ordering, check the station model and SKU S020187.
Usage Recommendations
- Use the light only with a compatible Anycubic Wash & Cure 3 Plus station
- Wash uncured resin residue from the model before UV curing
- Direct the light toward areas that are difficult to cure with the main UV system
- Use the light for corners, holes, relief, thin elements and internal zones
- Do not touch the model surface or liquid resin with the light
- Do not bend the flexible neck with excessive force
- Do not look directly at UV light during operation
- Clean the working area from resin residue after use
- Store the light in a clean and dry place
Suitable Applications
- Targeted UV curing of resin printed models
- Curing corners, grooves, holes and internal zones
- Post-processing miniatures, figures and decorative parts
- Final curing of prototypes and master models
- Working with complex shaped parts
- Additional curing of functional photopolymer resin parts
- Replacement of a damaged light in Anycubic Wash & Cure 3 Plus
FAQ
Is this light compatible with Anycubic Wash & Cure 3 Plus
Yes, Wash & Cure 3 Plus Gooseneck Light is intended for Anycubic Wash & Cure 3 Plus.
What is the SKU of Wash & Cure 3 Plus Gooseneck Light
The SKU of this part is S020187.
What is the flexible UV light used for
It is used for additional targeted curing of details, corners, recesses, holes and complex areas of resin printed models.
Is this light compatible with Wash & Cure 3
No, this product is listed for Wash & Cure 3 Plus. Wash & Cure 3 uses another compatible light.
Is this the main UV panel of the station
No, this is not the main UV panel. It is an additional flexible light for directed curing.
Can this light be used for full model curing
The station performs the main curing process, while Gooseneck Light is best used as an additional source for complex and hard-to-reach areas.
When should the light be replaced
The light should be replaced if it does not turn on, works unstable, is mechanically damaged, does not hold position or cannot provide sufficient targeted curing.