Touch Screen for Anycubic Photon Mono 4 Ultra
Anycubic Photon Mono 4 Ultra Touch Screen S020264 is an original spare part for the Anycubic Photon Mono 4 Ultra resin 3D printer. The touch screen is used as the printer control panel and is responsible for settings selection, print start, menu navigation, parameter control and service information display.
This part is not the main LCD exposure screen used for curing layers. It is the touchscreen control interface that allows the user to operate the printer. Replacement may be required if the panel stops responding to touch, the display is damaged, information is not shown correctly or printer control becomes unstable.
Main Benefits
- Original Anycubic spare part
- Compatible with Anycubic Photon Mono 4 Ultra
- SKU S020264
- Touchscreen printer control panel
- Used for selecting print modes and settings
- Helps restore normal 3D printer control
- Suitable for repair and service maintenance
- Useful when the old screen is damaged or touch control fails
Technical Specifications
| Product type | Touch screen for 3D printer |
| Brand | Anycubic |
| SKU | S020264 |
| Compatible model | Anycubic Photon Mono 4 Ultra |
| Part type | Control panel |
| Printer screen | 4.3″ HD touch screen |
| Purpose | Control of printer settings and functions |
| Category | Electronic spare parts for Anycubic resin 3D printers |
Compatibility
| Anycubic Photon Mono 4 Ultra |
When Replacement May Be Needed
- When the screen does not turn on.
- When the touch panel does not respond to input.
- When the display has cracks or mechanical damage.
- When information is displayed incorrectly.
- When the printer menu freezes or works unstably.
- When moisture, resin or contamination causes control problems.
- When the old control panel prevents normal printer setup and operation.
Installation Recommendations
- Turn off the 3D printer completely and disconnect it from power before replacement.
- Do not install the screen in a wet or contaminated area.
- Check ribbon cables, connectors and the panel mounting area before installation.
- Install the touch screen carefully without excessive pressure.
- Do not allow resin, alcohol or water to contact electronic components.
- After installation, check printer startup, touch response and menu operation.
- If you do not have electronics repair experience, use professional service support.
FAQ
Which printer is this touch screen compatible with?
The S020264 touch screen is compatible with Anycubic Photon Mono 4 Ultra.
Is this the LCD exposure screen?
No. This is the touchscreen control panel. The LCD exposure screen used for curing layers is a different spare part.
When should the touch screen be replaced?
Replacement is recommended if the screen is damaged, does not turn on, displays information incorrectly or does not respond to touch input.
Can I install the touch screen myself?
If you have electronics repair experience, installation can be done after disconnecting power. If not, professional service installation is recommended.
Is this screen compatible with Anycubic Photon Mono 4?
This product card lists Anycubic Photon Mono 4 Ultra as the compatible model. For Photon Mono 4, it is better to select the part by exact device SKU.