Print Platform for Anycubic Photon Mono X2 3D Printer
Description
Print Platform for Anycubic Photon Mono X2 is a replacement aluminum build plate for the Anycubic Photon Mono X2 resin 3D printer. The platform is used to hold the printed model during printing and works as the surface where the photopolymer resin object is formed layer by layer.
During resin printing, the first layer must adhere reliably to the platform surface. The condition of the build plate affects first layer adhesion, print stability, model geometry accuracy, base quality and overall printing success rate.
If the old platform is damaged, scratched, contaminated with cured resin, deformed or no longer holds the model properly, it should be replaced. A new build plate helps restore stable model adhesion to the working surface and reduces the risk of part detachment during printing.
Advantages
- Compatible with Anycubic Photon Mono X2
- Replacement build plate for a resin 3D printer
- Aluminum working surface
- Used for model fixation during printing
- Helps improve first layer adhesion
- Suitable for replacing a damaged or worn platform
- Important spare part for regular printer maintenance
- Suitable for miniatures, prototypes, master models and decorative parts
Technical Specifications
| Product name | Print Platform for Anycubic Photon Mono X2 3D Printer |
| Full product name | Print platform for 3D printer Anycubic Photon Mono X2 |
| SKU | S020111 |
| Part type | Print platform, build plate, working platform |
| Material | Aluminum |
| Compatibility | Anycubic Photon Mono X2 |
| Purpose | Model holding and formation during resin 3D printing |
| Printer type | LCD resin 3D printer |
| Category | Spare parts and accessories for Anycubic resin 3D printers |
When to Replace the Print Platform
- The model does not adhere properly to the platform during printing
- The first layers detach or deform
- The platform surface is heavily scratched
- The platform is damaged or deformed
- Adhesion becomes worse after long-term use
- Cured resin residue remains on the surface
- The platform was damaged during model removal
- Detachment issues remain after calibration
Compatibility
This print platform is intended for Anycubic Photon Mono X2. Before ordering, check the printer model, the old platform appearance and SKU S020111. Anycubic Photon Mono X, Photon Mono X 6K, Photon Mono X 6Ks, Photon M3 Plus, Photon Mono 2 and other models may use different print platforms.
Important Difference
This product is the print platform for Anycubic Photon Mono X2. It is not a resin vat, not an LCD screen, not FEP film, not a screen protector, not a UV LED module and not a motherboard. Before ordering, check the printer model and SKU S020111.
Installation Recommendations
- Turn off the printer before replacement
- Remove the old platform from the mount
- Clean the working area from resin and contamination
- Install the new platform without misalignment
- Check that the platform is securely fixed
- Level the platform after installation
- Run a test print before full production use
- Do not use excessive force when removing models from the platform
Usage Recommendations
- Clean the platform after every print
- Do not leave liquid resin on the surface for a long time
- Do not use sharp tools with excessive force
- Check the surface for damage after model removal
- Make sure the platform is clean and dry before printing
- Check calibration and leveling regularly
- Use correct exposure settings for the selected resin
- If adhesion becomes worse, check the platform surface condition
Suitable Applications
- Repair of Anycubic Photon Mono X2
- Replacement of a damaged print platform
- Restoring first layer adhesion
- Printing miniatures and figures
- Printing prototypes and master models
- Printing decorative photopolymer resin models
- Printing small functional parts
- Service maintenance of a resin 3D printer
FAQ
Is this print platform compatible with Anycubic Photon Mono X2
Yes, this print platform is intended for the Anycubic Photon Mono X2 3D printer.
What is the SKU of Print platform for 3D printer Anycubic Photon Mono X2
The SKU of this part is S020111.
What material is the platform made from
The platform is made from aluminum.
Is this a resin vat
No, this is a print platform. The resin vat is a different spare part.
Is this an LCD screen or screen protector
No, this is not an LCD screen and not a screen protector. It is the working platform where the model is formed during printing.
Should the platform be leveled after installation
Yes, after installing a new platform, leveling and a test print are recommended.
When should the print platform be replaced
The platform should be replaced if it is heavily worn, deformed, damaged, has poor first layer adhesion or if models regularly detach during printing.
