Anycubic PLA Filament Green Flash 1 kg 1.75 mm for 3D Printer
Description
Anycubic PLA Filament Green Flash 1 kg 1.75 mm is a filament for FDM 3D printing. It is suitable for decorative models, prototypes, toys, souvenirs, mockups, educational projects, hobby parts and everyday printing. The Green Flash color is bright, noticeable and suitable for models that need a strong visual accent.
This material is convenient for beginners and experienced users. PLA is easy to configure, feeds steadily through the extruder, does not usually require an enclosed chamber and is compatible with most FDM 3D printers that use 1.75 mm filament.
Advantages
- Bright Green Flash color for eye catching models
- Suitable for decorative parts, toys, souvenirs and mockups
- Standard 1.75 mm filament diameter
- Good compatibility with FDM 3D printers
- Easy print setup without an enclosed chamber
- Stable material feeding through the extruder
- Good detail reproduction and smooth model surface
- Suitable for single color and multicolor 3D printing
Technical Specifications
| Product name | Anycubic PLA Filament Green Flash 1 kg |
| Material type | PLA filament |
| Filament type | General filament |
| Color | Green Flash |
| Color code | #75CB5D |
| Net weight | 1 kg |
| Filament diameter | 1.75 mm |
| Recommended nozzle diameter | 0.2 mm or above |
| ACE compatibility | Compatible |
| Intelligent identification | Supported |
| Reusable filament spool | Supported |
Recommended Printing Parameters
| Nozzle temperature | 190-230 C |
| Heated bed temperature | 55-56 C |
| Recommended printing speed | 50-200 mm/s |
| Cooling time | 8 s |
| Maximum volume speed | 12 mm3/s |
| Dry out before use | Recommended |
| Drying condition | 45-50 C for 6-8 h |
Physical Properties
| Density | 1.24 g/cm3 |
| Melt index | 4-10 g/10 min at 190 C and 2.16 kg |
| Melting point temperature | 166 C |
| Vicat softening temperature | 55 C |
| Heat deflection temperature | 54 C at 0.45 MPa |
Mechanical Properties
| Youngs modulus | 2534 MPa |
| Tensile strength | 48 MPa |
| Elongation at break | 8% |
| Bending modulus | 3360 MPa |
| Bending strength | 90 MPa |
| Izod impact strength X-Y | 22 kJ/m2 |
| Tensile strength Z | 26 MPa |
Best Application Areas
- Toys and souvenirs
- Decorative models and figures
- Bright elements for cases and organizers
- Educational models for schools and workshops
- Prototypes and test samples
- Mockups, signs, labels and visual elements
- Models for multicolor printing
Compatibility with 3D Printers
Anycubic PLA Filament Green Flash 1.75 mm is compatible with most FDM 3D printers that support 1.75 mm PLA filament. It is suitable for Anycubic Kobra, Anycubic Kobra 2, Anycubic Kobra 2 Neo, Anycubic Kobra 2 Pro, Anycubic Kobra 2 Plus, Anycubic Kobra 2 Max, Anycubic Kobra 3, Anycubic Kobra 3 Combo, Anycubic Kobra 3 Max Combo, Anycubic Kobra S1, Creality, Bambu Lab, Prusa, Elegoo, QIDI, Artillery, Flashforge, Kingroon and Sovol.
Printing Recommendations
- Start printing with a nozzle temperature of 200-210 C and adjust after a test model
- Use a heated bed temperature of 55-56 C for stable adhesion
- Enable part cooling after the first layers
- Use lower speed for small decorative models
- If stringing appears, tune retraction and slightly reduce nozzle temperature
- If the surface becomes rough, dry the filament before printing
Storage Recommendations
Store Anycubic PLA Filament Green Flash in a dry place away from moisture, direct sunlight and high temperature. After printing, keep the spool in a sealed bag or dry box with silica gel. If the spool has been stored open for a long time, dry it at 45-50 C for 6-8 h before printing.
Why Buy This Filament
Anycubic PLA Filament Green Flash 1 kg is a good choice for users who need a bright, noticeable and easy to print PLA material. The Green Flash color is suitable for souvenirs, toys, decorative parts, mockups, visual samples and projects where a vivid green color is important.
FAQ
Is this filament suitable for beginners?
Yes, PLA filament is suitable for beginners because it is easy to configure, does not usually require an enclosed chamber and prints well on most FDM 3D printers.
What printing temperature is recommended for this filament?
The recommended nozzle temperature for Anycubic PLA filament is 190-230 C.
What bed temperature is needed for printing?
The recommended heated bed temperature is 55-56 C.
Is an enclosed chamber required for printing?
No, an enclosed chamber is usually not required for PLA. Proper temperature, first layer adhesion and cooling are more important.
Can this plastic be printed on Creality, Bambu Lab and Prusa printers?
Yes, this plastic can be printed on Creality, Bambu Lab and Prusa printers if the printer supports 1.75 mm PLA filament.
Do I need to dry PLA filament before printing?
Drying is recommended, especially if the spool has been stored open or if there are moisture signs such as popping sounds, bubbles, stringing and rough surface quality.
Which models are best suited for Green Flash color?
Green Flash is best suited for toys, souvenirs, decorative elements, mockups, logos, signs, cases and models that need to be bright and visually noticeable.