Nozzle Wiper Module for Anycubic Kobra S1 / Kobra S1 Combo
SKU: S010298
Manufacturer: Anycubic
Compatibility: Anycubic Kobra S1, Anycubic Kobra S1 Combo
Purpose: nozzle cleaning module / nozzle wiper module for removing filament residue from the nozzle
Description
The Nozzle Wiper Module for Anycubic Kobra S1 and Kobra S1 Combo is a replacement spare part used to remove melted filament residue from the nozzle during print preparation, service routines and automatic print head cleaning.
A properly functioning nozzle wiper module helps keep the hot zone cleaner, reduces the risk of plastic buildup on the nozzle and improves print start reliability. It is especially useful during frequent material changes, multi-color printing and regular printer operation, when strings, drops or residue may remain on the nozzle.
Key Benefits
- Original Anycubic spare part for Kobra S1 and Kobra S1 Combo.
- Used to clean filament residue from the nozzle.
- Helps reduce contamination around the nozzle and hot zone.
- Supports more reliable print starts and a cleaner first layer.
- Useful for multi-color printing and frequent material changes.
- Suitable for replacing a worn, contaminated or damaged nozzle cleaning module.
Technical Specifications
| Product name | Nozzle Wiper Module for Anycubic Kobra S1 / Kobra S1 Combo |
| Original name | Nozzle Wiper Module Kobra S1 | Kobra S1 Combo |
| Alternative name | Hotbed Nozzle Wiper / nozzle cleaning module |
| SKU | S010298 |
| Manufacturer | Anycubic |
| Part type | Nozzle wiper module / nozzle cleaning module |
| Installation area | Nozzle cleaning area / wiper module housing |
| Compatible models | Anycubic Kobra S1, Anycubic Kobra S1 Combo |
| Category | Spare parts for Anycubic FDM 3D printers |
When Replacement May Be Needed
- The nozzle wiper module is worn, damaged or deformed.
- The nozzle is no longer cleaned properly from melted filament residue.
- Strings, drops or contamination remain on the nozzle after wiping.
- Material changes cause residue, oozing or unreliable print starts.
- The first layer becomes less clean due to plastic residue on the nozzle.
- Preventive maintenance is being performed on Anycubic Kobra S1 or Kobra S1 Combo.
Installation Recommendations
- Turn off the 3D printer and disconnect the power cable before maintenance.
- Wait until the nozzle, hotend and working area cool down completely.
- Pull the old Nozzle Wiper Module outward from its housing.
- Clean the mounting area from dust, plastic residue and contamination.
- Insert the new nozzle wiper module into the housing.
- Make sure the part is seated evenly and does not interfere with print head movement.
- After installation, check nozzle wiping and run a test print.
Compatibility
The Nozzle Wiper Module with SKU S010298 is intended for Anycubic Kobra S1 and Anycubic Kobra S1 Combo. For Kobra Go, Kobra Neo, Kobra 2, Kobra 2 Neo, Kobra 2 Pro, Kobra 2 Plus, Kobra 2 Max, Kobra 3 and other models, compatibility should be checked separately by SKU, module shape and nozzle cleaning assembly design.
FAQ
Which printers is this module compatible with?
This module is intended for Anycubic Kobra S1 and Anycubic Kobra S1 Combo.
What is the SKU?
The SKU is S010298.
What is a Nozzle Wiper Module?
It is a nozzle cleaning module that helps remove filament residue from the nozzle before printing, during service routines or material changes.
Is this a nozzle or a cleaning module?
This is not a metal nozzle. It is a nozzle cleaning module / nozzle wiper.
When should the nozzle wiper module be replaced?
Replacement is recommended when it becomes worn, deformed, contaminated or no longer wipes the nozzle properly.
Should I test the printer after replacement?
Yes. After installation, check nozzle wiping operation and run a test print.