Heatbed Nozzle Wiper for Anycubic Kobra 3 / Kobra 3 Combo

SKU: S010225

Manufacturer: Anycubic

Compatibility: Anycubic Kobra 3, Anycubic Kobra 3 Combo

Purpose: nozzle cleaning element installed in the heated bed area

Description

The Heatbed Nozzle Wiper for Anycubic Kobra 3 and Kobra 3 Combo is a replacement spare part used to remove melted filament residue from the nozzle during service routines, print preparation and automatic print head cleaning.

This part helps keep the nozzle cleaner, reduces the risk of plastic buildup around the hot zone and improves print start reliability. It is especially useful for the Kobra 3 Combo during multi-color printing, where the printer performs material changes, purging and nozzle preparation more frequently.

Key Benefits

• Original Anycubic spare part for Kobra 3 and Kobra 3 Combo.
• Used to wipe filament residue from the nozzle.
• Helps reduce contamination around the nozzle and hot zone.
• Useful for multi-color printing and frequent material changes.
• Suitable for maintaining the automatic nozzle cleaning system.
• Helps support reliable print starts and a cleaner first layer.

Technical Specifications

When Replacement May Be Needed

• The nozzle wiper is worn, damaged or deformed.
• The nozzle is no longer cleaned properly from melted filament residue.
• Strings, drops or contamination remain on the nozzle after wiping.
• Multi-color printing shows contamination after material changes.
• The first layer becomes less stable due to plastic residue on the nozzle.
• Preventive maintenance is being performed on Anycubic Kobra 3 or Kobra 3 Combo.

Installation Recommendations

1. Turn off the 3D printer and disconnect the power cable before maintenance.
2. Wait until the nozzle, hotend and heated bed cool down completely.
3. Remove the old nozzle wiper if it is damaged or contaminated.
4. Clean the mounting area from plastic residue and dust.
5. Install the new Heatbed Nozzle Wiper in the original position.
6. Make sure the part is seated evenly and does not interfere with print head movement.
7. After installation, check nozzle wiping and run a test print.

Compatibility

The Heatbed Nozzle Wiper with SKU S010225 is intended for Anycubic Kobra 3 and Anycubic Kobra 3 Combo. For Kobra Go, Kobra Neo, Kobra 2, Kobra 2 Neo, Kobra 2 Pro, Kobra 2 Plus, Kobra 2 Max, Kobra S1 and other models, compatibility should be checked separately according to the correct SKU and nozzle cleaning assembly design.

FAQ