Black ABS-Like Resin+ Anycubic 1kg

New Action Bestseller
  • Фото 4
  • Фото 5
Item: SABBK
Not available - 0 шт.
Manufacturer:Anycubic
Weight:1.2 kg
Delivery
  • Nova Poshta - we'll send it today 29.03.2024
  • Meest Express - we will send tomorrow 30.03.2024
  • UkrPoshta - shipping Tuesday and Thursday
Description black abs-like resin+ anycubic 1kg

Anycubic ABS-Like Resin+ photopolymer is a resin with an ideal balance of properties. The durable material is highly resistant to impact and can be used for both prototyping and printing functional products in a variety of industries.

The material has properties similar to ABS plastic, but does not have a strong odor during printing. This makes printing comfortable even in a naturally ventilated room.

Anycubic ABS-Like Resin+ photopolymer has an excellent stable composition and good fluidity, which allows you to create products with an excellent smooth surface.

The resin is sensitive to UV rays in the range of 365-405 nm, so it is compatible not only with Anycubic 3D printers, but also with equipment from other manufacturers. Anycubic ABS-Like Resin+ is available in a variety of volumes and colors to suit all types of applications.

 

Characteristics
Are common
Brand Anycubic
Manufacturer country China
 
Basic
Type of photopolymer Standard
Printer illumination technology SLA
Illumination spectrum 365 - 405 nm
Shore hardness 84 D
Viscosity 220 - 250 MPa*s
Elongation at break 20 - 30%
Density 1.05 - 1.25 g/cm3
Tensile strength 35 - 55 MPa
Shrinkage 3.72 - 4.24%
 
Dimensions and weight
Product dimensions 100x100x280 mm
Packaging dimensions 110x110x300 mm
Net weight 1 kg
Gross weight 1.2 kg

 

Anycubic ABS-Like Resin+ is suitable for most LCD 3D printers and is optimized for 3D printing with wavelengths from 365 to 405 nm, and is also applicable to all kinds of models, housings and parts with demanding requirements such as industrial spare parts , building models, DIY, industrial design, casual design and other kinds of high-strength models.

  • Superior Tensile Strength, High Strength: Anycubic ABS-Like Resin+ provides the perfect balance between tensile strength and hardness. On the one hand, it is not brittle and is not easy to break due to its high elongation at break. On the other hand, its impact resistance ensures durability.
  • Strong Formula, Low Odor: Anycubic ABS-Like Resin+ has a light odor and is less bothered by strong odor due to its strong formula.
  • Long Shelf Life: The shelf life is one and a half years, which is longer than many other resins; If resin pigment settles, stir or shake well before use.
    Wide Compatibility: Sensitive to wavelength 365-405nm, widely used in the production of models with high strength requirements, such as engineering parts and industrial parts.

 

Anycubic Gray ABS-like resin Features

Superior Tensile Strength, High Strength: Anycubic ABS-like resin+ provides the perfect balance between tensile strength and hardness. On the one hand, it is not brittle and is not easy to break due to its high elongation at break. On the other hand, the impact resistance quality ensures durability.Strong Formula, Low Odor: Anycubic ABS-like resin+ is low odor and allows you to worry less about strong odor due to the strong formula.
Long Shelf Life: Shelf life is one and a half years, which is longer than many other resins; In any case, before use, please stir or shake the resin bottle several times.
Wide Compatibility: Sensitive to 365-405nm wavelength, widely used in the production of models with high strength requirements, such as engineering parts and industrial parts.
Balancing softness and strength, Anycuic ABS like Resin withstands bending, bending and compression. It shows good strength and elongation as well as the ability to resist cracking when drilling holes.
Parts printed with Anycubic ABS like Resin are impact resistant and have high impact strength. In addition, it can withstand strong impacts and other high-strength mechanical loads.
It can provide high precision, smooth surface, clear printing details and the advantages of low shrinkage when printing models. Reduced content of volatile organic compounds. Faint smell.

Anycubic Gray ABS-like resin Parameter information:

Base material: resin monomer and photoinitiator
Exposure parameters: exposure time at start (s) 15-40 s, normal exposure time (s) 3 -10 s
Wavelength 365 - 405 nm
Density - 1.05 - 1.25 g/cm3
Viscosity - 220- 250 MPa (at 25 degrees C)
Hardness - 84 Shore D
Tensile strength - 35-55 MPa
Elongation at break - 20-30% Tensile
modulus of elasticity - 1400-1600 MPa
Bending strength - 50-60 MPa
Elastic modulus at bending - 1500-1600 MPa

Anycubic Gray ABS-like resin Storage method:

Store away from direct sunlight at room temperature (sunlight contains a lot of ultraviolet radiation, which causes the light-sensitive resin to harden. Once tested by light, it is not affected unless it is ultraviolet light). Sunlight contains a lot of ultraviolet radiation, so it causes the photosensitive resin to harden.
It is recommended to store at ambient temperature 15℃ -35℃, the lower the temperature, the higher the viscosity of the resin. Unsealed storage, excessive dust or humidity may affect print quality. 
Shake well before use; do not use resin in places where there is a lot of sunlight.
Before use, wear gloves to avoid direct contact of resin with skin and ensure the area is well ventilated.
In case of accidental contact of resin with skin, rinse with plenty of water as soon as possible. If you feel unwell, seek medical attention.
Printed models should use high concentration alcohol to clean for about 30c (recommended concentration is 95% or more, the higher the better).
Do not pour resin from the resin tank into unused resin without cleaning it, and do not leave the resin in the resin tank for a long time without use, to avoid contamination of the resin affecting the printing effect (for a long time, the resin can be stored either in an airtight container or sealed plastic film in the printing tray, maintaining shading).
The resin has a shelf life of up to 18 months.

Anycubic Gray ABS-like resin Notes:

Before use:

  • Shake the liquid resin before use;
  • Clean the resin tank and molding platform so that the bottom of the resin tank allows light to pass through.

When to use:

  • Unscrew the cap and add it to the resin tank according to the equipment requirements;
  • Select the correct print options and print settings.

After use:

  • After printing, use appropriate post-processing tools, including blades, diagonal pliers, tweezers, containers and gloves; clean them with water.

Post-processing stages:

  • Remove the printed model from the molding platform using a blade.
  • Immerse the model in the cleaning solution, rinse or sonicate, then remove and dry; For best results, it is recommended to use Anycubic Wash and Cure machines.
  • Proper processing such as support removal, polishing, painting, etc.

Post-treatment of wastewater:

  • Do not discharge wastewater directly into the sewer system to avoid contaminating groundwater.
  • Heat the wastewater, let most of the water evaporate, and then throw away the residue after curing with a curing machine and sunlight.

 

Anycubic Gray ABS-like resin Precautions

  1. The ideal conditions for storing uncured resin are in a cool, dark place at room temperature, protected from light to avoid high temperatures or sunlight.
  2. The recommended working temperature is 18-35℃, and low temperature may affect the printing effect, so the resin should be preheated (no more than 60℃) before use.
  3. If the resin pigment settles, it can be used after stirring or shaking.
  4. To ensure the effectiveness of the resin, take out the model promptly after cleaning to prevent the model from being soaked in water for a long time.
  5. To ensure the mechanical properties of the model, carry out post-curing promptly after cleaning and drying.
  6. To ensure ideal performance of the curing material, it is necessary to control the intensity and time of exposure to the light source after curing. Therefore, the following steps are recommended:
  • The intensity of a mercury lamp or LED light source is 5-10 mW/m2, duration no more than 1 hour (self-regulation);
  • Time spent in the sun (summer) is about 1 hour;
  • Avoid proximity or prolonged exposure to strong light sources, such as high-power, high-pressure mercury lamps;
  • It is recommended to print in a dark room or keep the lid on while printing as resin is a light sensitive material.
    PS: Material properties will vary depending on molding equipment. Post-curing method and testing equipment. Safety information can be found in the Safety Data Sheet for this product. If you encounter any problems during use, please contact us.

Recommended Printing Parameters ABS-Like Photopolymer Resin+ Anycubic ABS-Like Resin+

Buy Black ABS-Like Resin+ Anycubic 1kg

Our online store offers a wide catalog of 3D equipment from popular manufacturers, including Black ABS-Like Resin+ Anycubic 1kg. We also offer consumables for 3D printing, stations for post-processing of printed models, accessories and spare parts for 3D printers and much more.

To get a consultation — contact our specialist by phone, request a call back or write to online chat. We will answer your questions and help you choose the right equipment.

You can buy Black ABS-Like Resin+ Anycubic 1kg in our office, with a guarantee and delivery throughout Ukraine from an official dealer.

Useful links:

  • 3D printing consumables
  • Stations for post-processing of printed models
  • Accessories and spare parts for 3D printers
Reviews 0
Leave a review for the product

There are currently no reviews for this product.
Your review will be the first .
Share your thoughts, your opinion about the product.

Leave feedback

Thank you for your feedback. To leave your feedback, simply fill out the form below.