Build Plate for Anycubic Photon Mono M5s and Photon Mono M5s Pro
Build Plate for Anycubic Photon Mono M5s and Photon Mono M5s Pro is a replacement print platform for Anycubic LCD MSLA resin 3D printers. The part is used to hold the model during printing, form the first layer correctly and keep the printed object fixed on the platform until the print process is complete.
Build Plate for Anycubic Photon Mono M5s | Photon Mono M5s PRO is suitable for replacing a damaged, worn or contaminated platform. It is also useful as an additional working platform when you need a faster workflow and want to start the next print sooner after removing a finished model.
Main advantages
- Compatible with Anycubic Photon Mono M5s
- Compatible with Anycubic Photon Mono M5s Pro
- Replacement Build Plate for resin printing
- SKU S020147 S020154 S020163
- Manufacturer Anycubic
- Suitable for LCD MSLA photopolymer printing
- Used for holding the model during printing
- Helps create a stable first layer
- Suitable for replacing a damaged or worn platform
- Useful as an additional build plate for faster workflow
- Compatible with 405 nm photopolymer resins
Technical specifications
| Product type | Print Platform Build Plate |
| Product name | Build Plate for Anycubic Photon Mono M5s | Photon Mono M5s PRO |
| SKU | S020147 S020154 S020163 |
| Manufacturer | Anycubic |
| Compatible printers | Anycubic Photon Mono M5s, Anycubic Photon Mono M5s Pro |
| Main purpose | Model holding, first layer formation and stable printing |
| Printing technology | LCD MSLA resin printing |
| Compatible materials | 405 nm photopolymer resins |
| Category | Spare parts and accessories for Anycubic Photon Mono M5s and Photon Mono M5s Pro |
When to replace the build plate
- The model does not stick well even after correct leveling
- The working surface has deep scratches or visible damage
- The platform has been deformed after impact or incorrect model removal
- The first layer becomes unstable without resin setting changes
- Prints frequently detach from the platform
- The platform is contaminated with resin residue and is difficult to clean
- You need an additional build plate for a faster workflow
Important compatibility note
This build plate is designed for Anycubic Photon Mono M5s and Anycubic Photon Mono M5s Pro. It should not be confused with build plates for Anycubic Photon Mono M5, Photon Mono M7, Photon Mono M7 Pro, Photon M3, Photon M3 Plus, Photon M3 Max or other Photon series models. Even if printer names look similar, mounting geometry, platform shape and build area may be different.
Usage recommendations
- Clean the platform and mounting area from resin residue before installation.
- After replacing the build plate, check leveling or calibration according to your printer model instructions.
- Do not remove models too aggressively with a metal scraper.
- Clean the working surface after every print.
- Do not leave uncured resin on the platform under direct sunlight.
- If adhesion becomes weak, check bottom exposure settings and platform surface condition.
- Before starting a new print, make sure the platform is properly fixed.
FAQ
Which printers is this build plate compatible with?
This build plate is compatible with Anycubic Photon Mono M5s and Anycubic Photon Mono M5s Pro.
What is the SKU of this product?
The combined Build Plate for Anycubic Photon Mono M5s | Photon Mono M5s PRO listing uses SKU S020147 S020154 S020163.
Is this build plate for Photon Mono M5?
No. This listing is for Photon Mono M5s and Photon Mono M5s Pro. Photon Mono M5 requires a separately compatible build plate.
Do I need to level the printer after replacing the platform?
After installing a new platform, it is recommended to check the platform fit and perform leveling or calibration according to the exact printer model instructions.
Why is a spare build plate useful?
A spare build plate can speed up the workflow. You can remove a finished model from one platform while installing another platform and starting the next print.
What materials can be used with this platform?
The platform is used with 405 nm photopolymer resins compatible with Anycubic Photon Mono M5s and Photon Mono M5s Pro.