Anycubic Kobra 3 V2 Combo
Fast and reliable multicolor FDM 3D printer with smart auto leveling and modern control features. Designed for speed quality and simple daily use.
Why choose Kobra 3 V2 Combo
- Multicolor printing out of the box with ACE Pro system
- High speed printing with precise motion control
- LeviQ auto leveling and smart first layer setup
- Built in camera for monitoring and time lapse
- Active filament drying and runout detection
- Easy control by touch screen LAN and app
Key highlights
- Build volume 255 x 255 x 260 mm
- Max nozzle temp up to 300 C
- Heated bed up to 110 C
- Standard 0.4 mm nozzle with optional sizes
- Power loss resume and spaghetti detection
- Clean cable and filament path for stable results
Technical specifications
| Technology | FDM single nozzle with external multicolor feeder ACE Pro |
|---|---|
| Build volume | 255 x 255 x 260 mm |
| Max speed | Up to 600 mm per second depending on model and material |
| Acceleration | Up to 20000 mm per second squared |
| Nozzle | Brass or hardened options 0.4 mm standard optional 0.25 0.6 0.8 |
| Nozzle temperature | Up to 300 C |
| Heated bed | Up to 110 C textured plate |
| Leveling | LeviQ auto leveling with area adaptive mesh |
| Supported materials | PLA PETG TPU. With ACE Pro add ABS ASA PET PA PC PP HIPS. TPU not recommended with ACE Pro |
| Multicolor | Up to 4 colors per ACE Pro module up to 8 colors with two modules |
| Connectivity | LAN USB print app control |
| Monitoring | Built in camera 720p for remote view and time lapse |
| User interface | 4.3 inch capacitive touch screen |
| Noise | About 47 dB during print higher during color change |
| Dimensions | See product sheet |
| Weight | See product sheet |
| Firmware | Based on Klipper features with screen control |
Values depend on filament model profile ambient conditions and maintenance.
What is in the box
- Anycubic Kobra 3 V2 printer main unit
- ACE Pro color engine modules and cables set
- Textured build plate installed
- Nozzle and maintenance tools
- Sample filament for test print
- Power cable and quick start guide
Recommended print settings
- Layer height 0.1 to 0.28 mm
- Nozzle 200 C to 260 C for PLA and PETG follow filament guide
- Bed 45 C to 70 C for PLA and PETG higher for ABS and ASA
- Speed normal 150 to 300 mm per second tune for quality
- Cooling on for PLA reduced for PETG off for ABS and ASA
- Adhesion use clean plate glue stick for ABS and ASA if needed
Use cases
- Prototypes with fast iteration and clear color logic
- Cosplay and decorative models with multicolor detail
- Functional parts with PETG ABS ASA where allowed
- Education workshops and maker labs
FAQ
Does the printer work without the ACE Pro system
Yes it prints as a standard single color FDM printer. You can connect ACE Pro later for multicolor.
Can I print TPU with ACE Pro
TPU is not recommended with multicolor feeder use direct single color feed for best results.
Do I need to set Z offset
The printer uses LeviQ auto leveling and sets the first layer height automatically. Fine tune if needed.
Which slicer should I use
Use the vendor slicer profile or import profiles to your preferred slicer. Start with default speeds.
How to avoid color bleed
Enable purge tower or shield. Keep filament dry. Use proper retraction and color change settings.
Order and support
Contact our team for current price shipping options and warranty terms. We help with setup profiles and first prints.
