5pcs Screen Protector for Anycubic Photon Mono X 6Ks 238 x 172 mm
Description
5pcs Screen Protector for Anycubic Photon Mono X 6Ks 238 x 172 mm is a set of replacement transparent protective films for the LCD screen of the Anycubic Photon Mono X 6Ks resin 3D printer. The film is installed over the LCD screen and helps protect it from resin, dust, scratches and accidental mechanical damage.
During resin 3D printing, the LCD screen is located under the resin vat. If the vat FEP or NFEP film is damaged, if a print fails or if hard particles get into the working area, the LCD screen can be scratched or contaminated with resin. A screen protector creates an additional barrier between the printer screen and the working area.
The 5 pcs set is convenient for regular Anycubic Photon Mono X 6Ks maintenance. The protector should be replaced when scratches, bubbles, cloudiness, resin contamination or surface damage appears, or after removing the old film during printer repair and cleaning.
Advantages
- Compatible with Anycubic Photon Mono X 6Ks
- Film size 238 x 172 mm
- Package includes 5 pcs
- Protects the LCD screen from resin, dust and scratches
- Helps reduce screen damage risk in case of resin leakage
- Suitable for regular resin 3D printer maintenance
- Convenient for replacing old, damaged or contaminated screen protectors
- Helps extend the LCD screen service life
- Not FEP film for the resin vat
Technical Specifications
| Product name | 5pcs Screen Protector for Anycubic Photon Mono X 6Ks 238 x 172 mm |
| Full product name | 5pcs Screen protector for Anycubic Photon Mono X 6KS |
| SKU | S020139 |
| Part type | LCD screen protector film |
| Compatibility | Anycubic Photon Mono X 6Ks |
| Film size | 238 x 172 mm |
| Quantity | 5 pcs |
| Purpose | Protection of the LCD screen from resin, dust, scratches and contamination |
| Printer type | LCD resin 3D printer |
| Category | Screen protectors for Anycubic resin 3D printer LCD displays |
When to Replace the Screen Protector
- The film has scratches or wear marks
- The film becomes cloudy and affects the working area visibility
- Resin residue remains on the surface
- The film starts peeling from the edges
- Bubbles, folds or uneven areas appear
- Contamination remains after a failed print
- The old film was removed during printer maintenance
- Additional protection is needed after installing a new LCD screen
Compatibility
This screen protector is intended for Anycubic Photon Mono X 6Ks. Before ordering, check the printer model, 238 x 172 mm film size and SKU S020139. Anycubic Photon Mono X, Photon Mono X2, Photon M3 Plus, Photon M3 Max, Photon Mono M5s, Photon Mono M7 and other models may use screen protectors with different dimensions.
Important Difference
This product is a screen protector for the LCD screen. It is not the LCD screen itself, not FEP film, not NFEP film and not ACF film for the resin vat. A screen protector is installed over the printer screen, while FEP, NFEP or ACF film is installed in the resin vat.
Installation Recommendations
- Turn off the printer and disconnect the power before installation
- Remove the resin vat and build platform
- Clean the LCD screen surface from dust and resin residue
- Do not use sharp tools to clean the screen
- Before applying the film, make sure there are no hard particles on the screen
- Apply the film evenly without misalignment or folds
- Smooth the film carefully to remove air bubbles
- Run an exposure test after installation
Usage Recommendations
- Check the screen protector before important prints
- Do not allow liquid resin to get under the film
- After a failed print, check the vat bottom for cured resin residue
- Do not clean the film with metal scrapers or knives
- Replace the film before the next print if it is damaged
- Monitor the condition of the vat FEP or NFEP film
- Store spare films in a clean and dry place
Suitable Applications
- Protecting the LCD screen of Anycubic Photon Mono X 6Ks
- Preventive resin 3D printer maintenance
- Replacing old or damaged screen protectors
- Protecting the screen after LCD module repair or replacement
- Reducing screen damage risk in case of resin leakage
- Preparing the printer for regular photopolymer resin printing
FAQ
Is this screen protector compatible with Anycubic Photon Mono X 6Ks
Yes, this screen protector is intended for Anycubic Photon Mono X 6Ks.
What is the film size
The film size is 238 x 172 mm.
How many protectors are included
The package includes 5 screen protectors.
What is the SKU of the 5 pcs set
The SKU of the 5 pcs set is S020139.
Is this an LCD screen or a screen protector
This is a screen protector for the LCD screen. The LCD screen itself is not included.
Is this FEP film for the resin vat
No, this is not FEP film for the resin vat. This protector is installed on the printer LCD screen.
When should the screen protector be replaced
The protector should be replaced if scratches, cloudiness, bubbles, peeling, resin contamination or mechanical damage appears.