Screen Protector for Anycubic Photon Mono M5 266 x 193 mm 5pcs
Screen protector for Anycubic Photon Mono M5 266 x 193 mm 5pcs SKU S020153 is a protective film set for the LCD screen of the Anycubic Photon Mono M5 resin 3D printer. The film is applied over the screen and helps protect it from accidental resin spills, scratches, dust and contamination during printing and maintenance.
The screen protector is an important consumable for resin 3D printer maintenance. It reduces the risk of LCD screen damage caused by resin vat leakage, failed prints, cleaning operations or replacement of FEP, NFEP and ACF films. The 5pcs set is convenient for regular maintenance and spare replacement.
Main Advantages
- Compatible with Anycubic Photon Mono M5 designed for the LCD screen of this resin 3D printer model.
- 266 x 193 mm film size matched to the screen protection area of Photon Mono M5.
- 5pcs set suitable for replacement, maintenance and spare storage.
- SKU S020153 for accurate product identification and easier ordering.
- Resin spill protection helps reduce the risk of screen damage if resin leaks from the vat.
- Scratch protection helps protect the LCD surface during cleaning and maintenance.
- Useful maintenance consumable for workshops, service centers and regular resin printing users.
Technical Specifications
| Product name | Screen Protector for Anycubic Photon Mono M5 266 x 193 mm 5pcs |
| Original product name | Screen protector for Anycubic Photon Mono M5 266 x 193 mm 5pcs |
| SKU | S020153 |
| Part type | LCD screen protective film |
| Film size | 266 x 193 mm |
| Quantity | 5pcs |
| Compatibility | Anycubic Photon Mono M5 |
| Printer type | LCD resin 3D printer |
| Purpose | LCD screen protection from resin, scratches, dust and contamination |
| Consumable type | Protective film for resin 3D printer maintenance |
| Condition | New replacement consumable |
Product Description
The screen protector for Anycubic Photon Mono M5 is designed to be installed over the LCD module of the resin 3D printer. The LCD screen is one of the most important and expensive components of a resin printer, so protecting it is essential for users who print regularly.
During resin printing, liquid resin may accidentally reach the screen area. This can happen because of a damaged release film, incorrect resin vat installation, resin leakage, failed prints or careless cleaning. The protective film creates an additional barrier between the LCD screen and external contamination.
The 5pcs pack is useful for users who want to keep replacement films available. If the installed protector becomes scratched, contaminated with resin or cloudy, it should be replaced to maintain clean UV light transmission and reduce the risk of printing defects.
When Replacement Is Needed
- The protector has deep scratches.
- The film is contaminated with photopolymer resin.
- The surface becomes cloudy or uneven.
- Bubbles, wrinkles or lifting edges appear.
- Cured resin marks remain after a failed print.
- The protector is damaged during screen cleaning or vat maintenance.
- Printing defects appear because of contamination on the protective layer.
Compatibility
This screen protector set is intended for the following printer model:
- Anycubic Photon Mono M5
Before ordering, check the exact printer model, film size 266 x 193 mm and SKU S020153. Screen protectors for Photon Mono M5s, Photon Mono M5s Pro, Photon Mono M7 and other models may look similar but should be checked separately for compatibility.
Installation Recommendations
- Turn off the 3D printer and disconnect the power cable.
- Remove the resin vat and clean the working area.
- Make sure the LCD screen is clean, dry and free from resin residue.
- Remove dust with a soft lint free cloth.
- Carefully align the screen protector with the LCD screen.
- Apply the film gradually to avoid bubbles and wrinkles.
- Smooth the surface with a soft card or cloth.
- After installation, make sure the film does not block important housing areas.
- Reinstall the resin vat and check the printer before printing.
Care Tips
- Do not clean the protector with metal tools.
- Do not use sharp objects to remove contamination.
- If resin gets onto the film, remove it carefully without damaging the surface.
- Do not start printing if bubbles or wrinkles are located in the active screen area.
- Check the film condition after every resin leak or failed print.
- Store spare films in a clean dry place away from dust and direct sunlight.
FAQ
What is this product?
It is a 5pcs screen protector set for the LCD screen of the Anycubic Photon Mono M5 resin 3D printer.
What is the SKU of this screen protector?
The SKU is S020153.
What is the film size?
The screen protector size is 266 x 193 mm.
How many protectors are included?
The set includes 5 screen protectors.
Which printer is this film compatible with?
This screen protector is compatible with Anycubic Photon Mono M5.
Why is an LCD screen protector needed?
It helps protect the LCD screen from resin, scratches, dust and contamination during printing and maintenance.
Does it fit Photon Mono M5s?
This product card is prepared for Anycubic Photon Mono M5. Compatibility with Photon Mono M5s should be checked separately by SKU and product description.
When should the screen protector be replaced?
It should be replaced when it becomes scratched, cloudy, contaminated with resin, wrinkled, bubbled or damaged.